similar to: [HCL] <Liebert> <PowerSure PSI 1440> supported by <?>

please reply to the list. thanks! See below. On Apr 3, 2014, at 3:10 AM, Daniele Borghesi wrote: > thanks for your reply. I'm running the latest version of FreeNAS based on 9.2 with NUT 2.7.1 > > [root at archivio ~]# uname -a > FreeBSD archivio.dannyb78.home 9.2-RELEASE-p3 FreeBSD 9.2-RELEASE-p3 #0 r262572+ > 38751c8: Thu

nothing appens. The output is exactly the same as below (attached screen with freenas config) [image: Immagine in linea 2] 2014-04-03 13:16 GMT+02:00 Charles Lepple <clepple at gmail.com>: > please reply to the list. thanks! > > See below. > > On Apr 3, 2014, at 3:10 AM, Daniele Borghesi wrote: > > thanks for your reply.* I'm running the latest version of

Nice! it seems to works. Later this evening when I'll be back to my home I'll try to unplug the power chord from my ups. Apr 3 14:08:11 archivio notifier: nut not running? (check > /var/db/nut/upsd.pid). > Apr 3 14:08:11 archivio notifier: nut_upsmon not running? (check > /var/db/nut/upsmon.pid). > Apr 3 14:08:11 archivio notifier: nut_upslog not running? (check >

On Apr 3, 2014, at 7:24 AM, Daniele Borghesi wrote: > nothing appens. The output is exactly the same as below (attached screen with freenas config) > What happens without the leading "-x"? (just "productid=0004") The "-x" is what you would add if you were running the driver from the command line. -- Charles Lepple clepple at gmail

Greetings all, Anyone have a clue on this behavior (see below) on this behavior with FreeNAS-8.3.0-RELEASE-x64 (r12701M) on a TrippLite 1500LCD UPS? NUT version is 2.6.5 Using the following profile: Tripp-Lite ups 2 Smart1500LCD USB (usbhid-ups) I get the following: Dec 10 21:40:12 nas6 kernel: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.02, addr 2> on usbus1 Dec 10 21:40:12

Hi, We have 2 UPS Chloride 80 NET 120 ( a black and white one ) in our datacenter. Could you please tell me if it is possible to use upsmon or other free solution with these two UPS for shuting down servers during electrical lost power before battery crash . Beet regards, Roger -------------- next part -------------- An HTML attachment was scrubbed... URL:

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically)

Hi, I have a Liebert PowerSure Personal XT that I have connected via its USB interface. lsusb shows that it is there and when I plugged in I got the kernel messages: Jul 3 11:25:37 mint kernel: usb 2-2.2: new low speed USB device using address 4 Jul 3 11:25:38 mint kernel: hiddev96: USB HID v1.11 Device [LIEBERT PowerSure Personal XT] on usb-0000:00:10.0-2.2 The documentation suggests that

This patch adds support for the following ups to liebert-hid.c: $ lsusb | grep Liebert Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS Using this patch, I'm able to obtain information about the ups via upsc: $ upsc upsname battery.charge: 100 battery.runtime: 1012 battery.type: PbAc battery.voltage: 1172 battery.voltage.nominal: 12 driver.name: usbhid-ups

Hi, I have a Liebert POWERSURE PSP connected via USB. Cleanly built and installed from source nut-2.4.3.tar.gz using kernel 2.6.30.5 #cat /proc/bus/usb T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=10af ProdID=0003 Rev= 0.00 S: Manufacturer=Liebert S: Product=Liebert PSP 350 FW: 02 S:

Jochen Bern wrote: > > Peter Selinger wrote: > > have you been able to get your Liebert UPS to work? If I am correct, > > it should work with the newhidups Belkin subdriver. Could you please > > post your results? I am curious to know if this works or doesn't - and > > if yes, we should add permanent support for Liebert into NUT. > > I'm sorry, but

Hey guys, :) recently, I installed Cyberpower PR2200ELCDRT2U, however, I have not managed to get this UPS working with FreeNAS 11, yet. According to compatibility list, PR2200 should work fine, when using powerpanel driver: http://networkupstools.org/ddl/Cyber_Power_Systems/ http://networkupstools.org/ddl/Cyber_Power_Systems/PR2200.html However, when trying to establish a connection between

Hello everyone, Charles suggested (about a week ago) that I repost to this list. I took a moment to run some additional tests ... The basics: -- UPS: Liebert PowerSure PSA 500 (from the 230 VAC / 50 Hz line) -- Kernel: 2.6.11.5 (from sources), USB support (down to and including CONFIG_USB_HIDDEV) compiled in statically (not as a module) -- Rest of OS: Basically still from the original SuSE

Hi, I've been trying (unsuccessfully) to interact with the above UPS using its USB/HID interface and have come to the conclusion that it's not going to be as "easy" as I'd first thought :( My attempts have all been on FreeBSD-5 (kernel as of today) using NUT v2.0.2 and fiddling with newhidups -- I tried the simple approach of adding the IDs and "seeing what

On Feb 4, 2014, at 10:48 PM, Elliot Dierksen wrote: > NUT will complain endlessly about communication errors and never establish SNMP communication with my APC UPS Hmm, at first glance, I read the "complain endlessly" part as a figure of speech, and figured SNMP would get there eventually since it's UDP. But if you have to stop and restart NUT, that is a different story. What

I am running NUT as part of FreeNAS 9.2.0. I have looked through the manuals, but I don't see how to address my issue. The box has 4 NIC's in a LACP LAGG group. It takes a while for LACP to finish, and NUT tries to start before packets are flowing. NUT will complain endlessly about communication errors and never establish SNMP communication with my APC UPS. If I stop NUT and restart

hieverybody I'd like to ask if anybody have any experience with above products? and positive outcomewhen coupled with nut? thanks

Hi all, I?ve a UPS Liebert GXT3 500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength

Hello, I (now) own an Emerson Liebert GXT3 6000VA conected via USB. I've searched the web trying to configure nut (nut-2.6.5-1.el6.x86_64 epel rpm on CentOS 6.3) to monitor the UPS, but couldn't find a successful configuration. I'm running kernel 2.6.32-279.14.1.el6.x86_64. The UPS is connected with an USB cable: Bus 004 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive

Replaced ups with a new Liebert UPS and it seems the device may not be known to nut. Below is output of lsusb: ID 10af:0002 Liebert Corp. PowerSure PST UPS Sent from Outlook<http://aka.ms/weboutlook> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20231204/7c08a727/attachment.htm>