similar to: Tripplite UPS (SU10KRT3/1X) through snmp-ups (nut 2.6.5)

On Feb 17, 2014, at 4:35 AM, ??? ????? wrote: > ups.status: OL Actually, during your next maintenance window, is it possible to verify that the driver sees the "OB" and "LB" status values? We also might want to add R/W variables, and the instant command to enable shutdown. -- Charles Lepple clepple at gmail

Hi, Nut-upsusers, I am having problem configuring NUT to work with Tripplite UPS through SNMP. There is a Tripplite SmartOnline SU10KRT3/1X and attempts to monitor it using NUT though SNMP are failing... OS: Enterprise Linux 6, Nut version: 2.6.5. ups.conf is configured: [trippliteups] driver = snmp-ups port = 10.200.254.39 desc = "ProductionServer"

On Feb 13, 2014, at 10:49 PM, ??? ????? wrote: > Slightly changed the list, took from running snmptranslate for all parameters: > snmptranslate -IR -On upsBaseIdentModel upsBaseBatteryStatus upsSmartBatteryCapacity upsSmartBatteryTemperature upsSmartInputLineVoltage upsBaseOutputStatus upsSmartOutputVoltage upsSmartOutputFrequency upsSmartOutputLoad upsSmartControlUpsOff

On Feb 16, 2014, at 11:33 PM, ??? ????? wrote: > > > I forgot to mention, if you don't want to deal with autoconf, etc., when building from Git, you can grab a snapshot from Buildbot: > > nut-2.7.1.5.tar.gz > > > Thanks a lot, I downloaded it from this link and ran commands "autoreconf && ./configure && make" to build it: > You

> > I forgot to mention, if you don't want to deal with autoconf, etc., when > building from Git, you can grab a snapshot from Buildbot: > > nut-2.7.1.5.tar.gz<http://buildbot.networkupstools.org/~buildbot/cayman/snapshot/snmp_subdriver/rab7b0452e21aef8aaf308963da6380e712427e1d-146/nut-2.7.1.5.tar.gz> > > Thanks a lot, I downloaded it from this link and ran commands

[Please keep the list CC'd. Thanks!] On Feb 13, 2014, at 4:55 AM, ??? ????? wrote: > Can you try adding "-v 1" to the snmpwalk command? If that works, we can add it to gen-snmp-subdriver.sh. > > Yes, I tried it before, ran command "snmpwalk -v 1 -On -c public 10.200.254.39 .1.3.6.1.4.1.935" > > Output: > .1.3.6.1.4.1.935 = NULL > Error: OID not

> Does it have the same behavior if you start from .1.3.6.1.4.1.935*.1* or . > 1.3.6.1.4.1.935.1.1? If not, no worries - see below. > > Yes, says "Timeout: No Response from 10.200.254.39", Ok. > ..... > > >> The important part of "mode 2" is to have the output of snmpwalk. It is >> possible to query each OID, and manually build the *-mib.c

On Feb 10, 2014, at 1:16 AM, ??? ????? wrote: > Thanks for you reply. Concerning the subscribtion list, I have earlier filled in the fields and sent request to subscribe to this list, but still haven't got an answer. I added you manually, but check your spam folder just in case it ended up there. > Yes, I do have a MIB file that was on CD that came with the UPS, attached it to this

Thanks, now I started getting messages from the list. As you advised, I renamed the mib file NETCARD.mib to Tripplite and ran command ./gen-snmp-subdriver.sh -H 10.200.254.39 -c public -n Tripplite Here is what it says: snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating tripplite-mib.h Creating tripplite-mib.c Done.

Hi sombody know what is happen with Jim diGriz''s QoS Script Web Page ? www.digriz.org.uk/jdg-qos-script Regards _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi! This is not exactly a development contibution but more an expression of opinion. Didn't find a better place to send this to. I've been using openssh on Linux for some time now. Works just fine with one exception. Since I work at a company which likes to live behind a wall we use a socks firewall for allowing some connections to the world (we *should* be a part of it, but I'm not

Hello, I wanted to see if there's any chance that NUT will support a few new TrippLite UPSes that we just bought: Sep 9 01:42:25 miko /kernel: uhid0: TRIPP LITE TRIPP LITE OMNIVS1500XL, rev 1.1 I grabbed the devel sources via cvs, but am having trouble building it when I enable the "newhidups" driver: gmake[1]: Leaving directory `/usr/local/src/nut/common' drivers/

Hi all: I am trying to get a TrippLito OMNI1000LCD working with nut. Even with the development branch, I get the following.... upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: HID UPS driver 0.13 (2.1.0) Warning: This is an experimental driver. Some features may not function correctly. Detected Tripp Lite TRIPP LITE UPS on port /dev/usb/hiddev0

For my Smart 2200, a charged battery string is anywhere between 25.6 and 26.8 volts. I'm seeing nut report 13.0 volts, which seems suspicious. Even if the UPS were reporting half of the actual battery voltage to keep protocol compatibility with models having a 12V battery system, the value of exactly 13.0 seems unlikely. According to the page at

Hello list- Anyone with Tripplite SMX1500XLRT2U (http://www.tripplite.com/EN/products/model.cfm?txtModelID=2687) successfully integrated with NUT through serial port? I'm trying to connect to SMX1500XLRT2U using serial cable shipped with UPS under FreeBSD 6.3-STABLE and NUT 2.2.2 installed from ports. Unfortunately, it looks like it couldn't be recognized. %dmesg | grep sio sio0:

reported through launchpad: https://bugs.launchpad.net/bugs/253999 the possible regression is between nut 2.0.1 (sarge) and 2.2.1 (confirmed Jamie?) @Arjen: it may be related to some of your changes there... @Jamie: we'll need some debug output from the drivers (-DDD) Arnaud

Hi, I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to work on my system. What I have is: Ubuntu 10.04 Server Nut 2.4.3 /etc/nut/ups.conf [omni] Driver = tripplite_usb Port = auto Desc = "My Server" /etc/nut/nut.conf MODE=standalone Iget the following error when using the > sudo upsdrvctl start Network

Tim, thanks! Does this UPS have a USB port as well? The key thing for TrippLite UPSes is this command: Command to UPS Response from UPS Function :00FFCR 00005XXXXCR unknown The second and third bytes are the protocol number. I think I may have misinterpreted something in the formatting -- what are the hex values of the bytes in this command/response pair? I don't have time to

I am using NUT 2.0.2 on SuSE Linux 9.2 which is attached to a Tripplite SmartPro Net 2200 UPS. I have Nut using the included tripplite driver, and it is communicating with the UPS correctly. The battery voltage of theTripplite reported by the NUT server is 13.5VDC. If I attach the UPS to a Windows 2000 server running Tripplite's PowerAlert software, the battery voltage is being reported as

Hey I recently picked up a couple SMART1000LCD TrippLite UPS's. These are similar to other usb ups's that have been mentioned on the list in the past few months. I tried a few patches posted last month and got some amount of success. That being said, I am thus far unable to get much love from the actual upsd itself. Any pointers in terms of what I may need to change or what help I can