Nut upsuser - Feb 2014 - Tripplite UPS (SU10KRT3/1X) through snmp-ups (nut 2.6.5)

> Since you didn't specify an install prefix, check /usr/local/ups for
your
> new installation.
>
Thanks, found the installation there.


Please try building snmp-ups, and let me know how the output of upsc
looks.
>
Rebuilt is with "*--with-snmp" *option, installed and started nut
processes, and they are working :)

upsc trippliteups at 10.200.254.26 command output shows the UPS status as
shown below:)

battery.charge: 100.00
device.mfr: Tripp Lite / Phoenixtec
device.model: Intelligent
device.type: ups
driver.name: snmp-ups
driver.parameter.pollinterval: 2
driver.parameter.port: 10.200.254.39
driver.version: 2.7.1.5
driver.version.data: xppc MIB 0.2
driver.version.internal: 0.71
input.voltage: 213.30
output.frequency: 50.00
output.voltage: 230.80
ups.load: 7.00
ups.mfr: Tripp Lite / Phoenixtec
ups.model: Intelligent
ups.status: OL
ups.temperature: 28.00

Thanks so much for your help, it's great to know that with your and the
team's contibution nut is evolving and supporting so many UPS models!

Sincerely,
Ishi Kylsa
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20140217/758111a3/attachment.html>

On Feb 17, 2014, at 4:35 AM, ??? ????? wrote:
> Thanks so much for your help, it's great to know that with your and the
team's contibution nut is evolving and supporting so many UPS models!
You're welcome!

I merged this into the master branch, so it will be part of the next release
after 2.7.1.

-- 
Charles Lepple
clepple at gmail

On Feb 17, 2014, at 4:35 AM, ??? ????? wrote:
> ups.status: OL
Actually, during your next maintenance window, is it possible to verify that the
driver sees the "OB" and "LB" status values?

We also might want to add R/W variables, and the instant command to enable
shutdown.

-- 
Charles Lepple
clepple at gmail

>
>
> > ups.status: OL
>
> Actually, during your next maintenance window, is it possible to verify
> that the driver sees the "OB" and "LB" status values?
>
> We also might want to add R/W variables, and the instant command to enable
> shutdown.
>
>
Ok, probably on weekends there will be a maintenance windows when I will be
able to test OB and LB statuses, will write about it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20140219/d6f5b472/attachment.html>