similar to: compatable driver

On Feb 7, 2014, at 10:04 PM, Muley wrote: > Hi Charles, > > I tried the product ID option with the same result. Hmm, it should have failed with a different error message, probably something about permissions. What if you try: /lib/nut/usbhid-ups -a name-of-ups -u root -x productid=3016 > Will 2.7.1 run on Fedora 14? Not sure, I tend not to use RPM-based systems myself. We have a

I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. System: Ubuntu 14.04.1 Trusty Tahr Installed nut from Ubuntu repositories - nut 2.7.1 Ups.conf file maxretry = 3 # user = nut [TrippLite] driver = usbhid-ups port = auto productid = 3016 desc = "Tripp Lite UPS,

On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > I have searched the archives and googled this problem with usbhid-ups. I would really appreciate any help anyone could offer to solve the problem. > > System: Ubuntu 14.04.1 Trusty Tahr Which kernel version are you using? > Installed nut from Ubuntu repositories ? nut 2.7.1 > > Ups.conf file

See comments below. > -----Original Message----- > From: Charles Lepple [mailto:clepple at gmail.com] > Sent: Friday, August 29, 2014 5:35 AM > To: barry at skrypnyks.com > Cc: nut-upsuser at lists.alioth.debian.org > Subject: Re: [Nut-upsuser] Smart1500lcdt will not connect with usbhid-ups > > On Aug 28, 2014, at 6:49 PM, Barry Skrypnyk <barry at skrypnyks.com>

Charles and Wolfy, Thanks for the replies. I added some responses below. I think I got the driver debugging right, but let me know if it is off. I should note: The CentOS 7.6 machine I have been testing with is a virtual machine (running on VMware ESXi 7.6). At least 1 customer and I have seen the same issue on VMs and physical boxes, so I don’t think that matters, but if it does let me know.

On Aug 29, 2014, at 2:02 PM, Barry Skrypnyk <barry at skrypnyks.com> wrote: > See comments below. > >> -----Original Message----- >> From: Charles Lepple [mailto:clepple at gmail.com] >> Sent: Friday, August 29, 2014 5:35 AM >> To: barry at skrypnyks.com >> Cc: nut-upsuser at lists.alioth.debian.org >> Subject: Re: [Nut-upsuser] Smart1500lcdt will

Hello, I'm not sure this is doable but I'm having trouble running my R script with multithreaded capability. With 16x2.93Ghz CPUs available, only one is running with 100%. Any suggestions? Thanks, Bing My system configuration is: egenera virtual machine running Linux Red Hat Enterprise Linux Server release 5.1 (Tikanga) 16x2.93GHz CUPs 99G memory

Per the message printed by upsdrvctl: upsdrvctl start Network UPS Tools - UPS driver controller 2.6.3 Network UPS Tools - Generic HID driver 0.35 (2.6.3) USB communication driver 0.31 This TrippLite device (09ae:3016) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try running the driver with the

I talked to Tripp Lite Technical support. Their policy is that they only support Fedora and SUSE. There is no one there that could help with Ubuntu or NUT issues. The only answer they could give me was to port the rpm files to Ubuntu and use them. This is way beyond my experience level. I will go to the local electronics store and buy a cheap USB 2 hub to see if that works. I will post the

On 5/13/2017 10:20 AM, Charles Lepple wrote: > On May 12, 2017, at 10:06 AM, Mike <the.lists at mgm51.com> wrote: >> >> >> OpenBSD 6.1/amd64 >> nut-2.7.4p0 (from OpenBSD package) >> UPS: Tripp-Lite OMNI1500LCDT >> >> I cannot get the driver for the UPS to load without error. >> >> Here are the commands, with the output, and the config

Barry, I have had success with NUT on Debian and an EATON 5E2000IUSB-AU 5E 2000VA/1200W UPS With 3 x OUTLETS which I believe is good value. I would believe the the EATON ?5E 1500VA/900W UPS With 3 x OUTLETS would work just as well. The 1500VA also uses the same batteries as the 2000VA so I would believe it would run its raited load longer than 2000VA. My eight drive RAID driver uses less that

Having trouble configuring nut 2.7.4 on Fedora 25, with a new Tripp Lite UPS. I'm running XFCE, and XFCE's Power Manager sees the UPS just fine. lsusb gives: Bus 006 Device 002: ID 09ae:3016 Tripp Lite nut-scanner -U has no issues either: # nut-scanner -U Scanning USB bus. [nutdev1] driver = "usbhid-ups" port = "auto" vendorid = "09AE" productid =

On May 12, 2017, at 10:06 AM, Mike <the.lists at mgm51.com> wrote: > > > OpenBSD 6.1/amd64 > nut-2.7.4p0 (from OpenBSD package) > UPS: Tripp-Lite OMNI1500LCDT > > I cannot get the driver for the UPS to load without error. > > Here are the commands, with the output, and the config files: > > ======================================================= > #

Hi Everyone, I'm having trouble getting TrippLite SMX1500LCDT to work on FreeBSD 11.2, nut 2.7.4 installed from FreeBSD port. The debug output is rather big when I'm starting usbhid-ups initially, Please find that attached (gzipped to comply with message size limit). Subsequently, until I unplug and replug the USB cable, I'm geting a shorter debug output, like this: Network UPS

On Jun 17, 2019, at 3:00 PM, David Zomaya <David_Zomaya at tripplite.com> wrote: > > Hi Network UPS Tools Support, > > I’m not sure if this is a question for the “user group” or the developer group”. The config files will be useful for -users, but I'd say the development list is probably better for discussing potential changes. > My name is David Zomaya and I work at

> What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) FreeBSD 10.2-RELEASE #0 r286738M the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free.? if you need the ./configure I might have to look for their source on GitHub or something. /usr/local/libexec/nut/usbhid-ups -a

On Jun 18, 2019, at 1:47 PM, David Zomaya wrote: > > Charles and Wolfy, > > Thanks for the replies. > > I added some responses below. > I think I got the driver debugging right, but let me know if it is off. > > I should note: > The CentOS 7.6 machine I have been testing with is a virtual machine (running on VMware ESXi 7.6). At least 1 customer and I have seen

Tripp Lite SMART1300LCDT # upsc ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 30 battery.runtime: 2951 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 24.0 device.mfr: Tripp Lite device.model: TRIPP LITE UPS device.serial: 2250AVLSM872100251 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

OS = NAS4Free (FreeBSD Revision: 199506) NUT Version = 2.7.3 for other parts of NUT version is listed below NUT is part of the NAS4Free distribution Device = Tripp Lite SMART1300LCDT URL http://www.tripplite.com/line-interactive-ups-system-desktop-tower-1300va-120v-usb-port-lcd-screen~SMART1300LCDT/ PROBLEM: NUT is ABLE to see the UPS BUT it is not getting the right(?) descriptor? I am using

I am currently running FreeNAS-8.3.1-RELEASE-x64 (r13452) using the packaged version of NUT, 2.6.5, using the usbhid-ups (Generic HID driver 0.37). Here is the output of "/usr/local/libexec/nut/usbhid-ups -D -D -D -D -D -D -a tripplite": Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 send_to_all: SETINFO driver.parameter.port