similar to: CENTOS 6.6 NUT RPM BUILD ISSUES

On Mar 23, 2015, at 7:57 PM, Eric Cobb <Eric_Cobb at tripplite.com> wrote: > Number 1 change - 2.7.2 no longer has the HAL scripts that 2.6.5 has. I am working on if HAL is actually required on CentOS6.6 with the 2.7.2 code or if they have another way around it. This is code diving which is taking some time. HAL support in NUT was bit-rotting, so it was removed. It isn't

Charles, Thanks again for your help. We were able to have a 2.7.2.6 build complied into a working RPM for CENTOS 6.6. There is one more issue that needs to be addressed: The init script no longer works so a new script needs to be written to enable and disable the ups functionality, however it is communicating with the UPS properly. The question I have at this point is, is there a way I can

Hello, My name is Eric Cobb and I am a Product Specialist with Tripp Lite. We have tested your latest NUT distributions against our HID USB compatible UPS systems and would like to know what is needed and/or who is needed to contact in order to updated the listing of compatible Tripp Lite UPS systems in your HCL list? Best Regards, Eric K. Cobb Product Management Specialist [Tripp Lite] 1111

Hello, I am trying to get a SMART500RT1U working on CentOS and just receiving the following message when attempting to start the driver: Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U Unknown input voltage range: 0x02 Unknown number of

On Mar 6, 2015, at 12:51 PM, Eric Cobb <Eric_Cobb at tripplite.com> wrote: > Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) > Warning: This is an experimental driver. > Some features may not function correctly. > > Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U > Unknown input voltage range: 0x02 > Unknown number of switchable load banks:

On March 6, 2015, at 6:17pm, Charles Leppe ,cleppe at gmail.com> wrote: If this is the same protocol 3005 that we saw in mid-2014 (USB ID: 09AE:0001), then support will be part of the upcoming NUT 2.7.3 release. You wouldn't happen to know anyone who would be able to publish the specs of that protocol, would you? ;-) That would help remove the "experimental driver" warning.

Hey 2015-04-09 1:46 GMT+02:00 Charles Lepple <clepple at gmail.com>: > On Apr 8, 2015, at 2:04 PM, Eric Cobb <Eric_Cobb at tripplite.com> wrote: > > Charles and list, > > If I leave the driver alone it does not eventually start. It continues to > report that it is unable to connect. I have to perform a upsdrvctl stop ; > upsdrvctl start (I actually just perform

Network UPS Tools version 2.7.1 has been released: http://www.networkupstools.org/ This release is an interim release, part of the testing series, and the first release after the transition from Subversion to Git. The last release (2.6.5) is almost a year old. A lot of work has been done, but a good amount remains to achieve 2.8.0 goals. Direct access: - Download:

Ok, so I have made some progress that seems to suggest the initial “fix” I stumbled upon isn’t required. I haven’t yet worked backwards to figure out reasons why our customers have had similar complaints or solve the problem on the CentOS VM yet, but that is on the todo list. I am hoping it ends up just being not enabling the service on startup, but I can’t say that explains away all the symptoms

That worked out just fine. What I am currently running into are conditions where I am getting the following error that I figured I would share. Error: libusb_get_interrupt() returned 0 instead of 8 while sending 3a 4d b2 0d 00 00 00 00 '.M......' Conditions: upsdrvctl start via Init Script at Boottime. If I run the init script after boot, I do not receive this error. Eric Cobb ekcobb

On Oct 15, 2013, at 3:40 PM, Eric Cobb wrote: > My name is Eric Cobb and I am a Product Specialist with Tripp Lite. We have tested your latest NUT distributions against our HID USB compatible UPS systems and would like to know what is needed and/or who is needed to contact in order to updated the listing of compatible Tripp Lite UPS systems in your HCL list? Hi Eric, From end users of NUT,

Hi Greg, I haven’t but I will give that a shot later this week and advise. Thanks for the tip. Thank you, David Zomaya Technical Support [cid:image007.png at 01D525AF.B38D63F0] 1111 W. 35th Street | Chicago, IL 60609 USA 773.869.1156 | david_zomaya at tripplite.com [cid:image008.png at 01D525AF.B38D63F0]<http://www.tripplite.com/> From: Nut-upsuser

Charles and Wolfy, Thanks for the replies. I added some responses below. I think I got the driver debugging right, but let me know if it is off. I should note: The CentOS 7.6 machine I have been testing with is a virtual machine (running on VMware ESXi 7.6). At least 1 customer and I have seen the same issue on VMs and physical boxes, so I don’t think that matters, but if it does let me know.

Hi Network UPS Tools Support, I'm not sure if this is a question for the "user group" or the developer group". My name is David Zomaya and I work at Tripp Lite in our technical support department. Copied on this email are Eric Cobb from our Product Management group & Jonathan Manzanilla tech support subject matter expert for our single phase UPS product lines. Recently,

Hi Network UPS Tools Support, I'm not sure if this is a question for the "user group" or the developer group". My name is David Zomaya and I work at Tripp Lite in our technical support department. Copied on this email are Eric Cobb from our Product Management group & Jonathan Manzanilla tech support subject matter expert for our single phase UPS product lines. Recently,

Hello Mr. Leppe, See the attached excel file that covers the current Tripp Lite HID compatible UPS systems. There is also an attached Word document covering the UPSC / UPSCMD / UPSRW information from the specific UPS systems. Let me know if this is adequate to get our additional HID compatible products added to the NUT HCL listing. Tripp Lite Eric K. Cobb Product Management Specialist 1111

Thanks for the inputs. I’ll get CentOS 7.6 installed on a physical machine this week and follow up. Few responses and notes below in the interim. ”The log format looks okay, but I may not have been clear that I was looking for the log at the same time as when the kernel errors occur. So without the udev rules would be good.” Ah, sorry. Attached are these two files: 1-

That would be great.  If there is something I can do to collect data or troubleshoot, please let me know. ---- On Wed, 20 May 2020 08:51:14 -0400 David Zomaya <David_Zomaya at tripplite.com> wrote ---- I'm still working remotely, but I should be able to get something set up soon. I'll reply all here once I have something to report. Thank you, David Zomaya Tripp

After a quick glance, it looks like that older version of the INTERNET750U supports only a few controls Shutdown of the inverter, cancelling that shutdown, setting the delay for the shutdown timer, and enabling/disabling a USB watchdog function. My *guess* is that Network UPS Tools is just exposing the shutdown command as one command. Does that help? Note to users with the same model but

Glad to hear it's working, thanks Tom. Network UPS Tools team: is fixing this as simple as me telling you what new UPS protocols are HID-PDC compliant? Thank you, David Zomaya Tripp Lite<http://www.tripplite.com/> ________________________________ From: Tom Cooper <tom at cooperfamily.xyz> Sent: Wednesday, May 20, 2020 2:42 PM To: David Zomaya Cc: nut-upsuser Subject: Re: