similar to: [HCL] Tripp Lite SMART1300LCDT supported by usbhid-ups

On Aug 7, 2013, at 10:43 AM, Matthew Lenz wrote: > Tripp Lite SMART1300LCDT > > # upsc ups [...] > battery.voltage: 0.0 > battery.voltage.nominal: 24.0 [...] > input.frequency: 5990.0 > input.transfer.high: 150.0 > input.transfer.low: 92.0 > input.voltage: 0.0 > input.voltage.nominal: 120 > output.current: 100.00 > output.frequency: 5990.0 >

On Wed, Aug 7, 2013 at 6:47 PM, Charles Lepple wrote: > On Aug 7, 2013, at 10:43 AM, Matthew Lenz wrote: > >> Tripp Lite SMART1300LCDT >> >> # upsc ups > [...] >> battery.voltage: 0.0 >> battery.voltage.nominal: 24.0 > [...] >> input.frequency: 5990.0 >> input.transfer.high: 150.0 >> input.transfer.low: 92.0 >> input.voltage: 0.0

So when the UPS is communicating with the driver... it seems to work.? Problem is now that it keeps disconnecting.? Any recommendation on how to keep the drivers from disconnecting using the usb_set_altinterface?? (PS.? Is there a specific value to use?)? Or this confirms there is an issue with the usbhid-ups driver with the FreeBSD 10.2 kernel? upsc upstl1300 battery.charge: 100

> What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) FreeBSD 10.2-RELEASE #0 r286738M the last person probably wasn't able to give the ./configure probably because most people uses the precompiled iso to install NAS4Free.? if you need the ./configure I might have to look for their source on GitHub or something. /usr/local/libexec/nut/usbhid-ups -a

OS = NAS4Free (FreeBSD Revision: 199506) NUT Version = 2.7.3 for other parts of NUT version is listed below NUT is part of the NAS4Free distribution Device = Tripp Lite SMART1300LCDT URL http://www.tripplite.com/line-interactive-ups-system-desktop-tower-1300va-120v-usb-port-lcd-screen~SMART1300LCDT/ PROBLEM: NUT is ABLE to see the UPS BUT it is not getting the right(?) descriptor? I am using

On Aug 8, 2013, at 9:14 AM, Matthew Lenz wrote: > On Wed, Aug 7, 2013 at 6:47 PM, Charles Lepple wrote: >> Could you please stop the NUT services (or just the driver, whatever is easiest) and run "sudo /lib/nut/usbhid-ups -a ups -DDD" ? > > How much output would you like from this? Want me to just stick it on > a pastebin somewhere? > Just a few kB from the

On Thu, Aug 8, 2013 at 6:27 PM, Charles Lepple wrote: > On Aug 8, 2013, at 9:14 AM, Matthew Lenz wrote: > >> On Wed, Aug 7, 2013 at 6:47 PM, Charles Lepple wrote: >>> Could you please stop the NUT services (or just the driver, whatever is easiest) and run "sudo /lib/nut/usbhid-ups -a ups -DDD" ? >> >> How much output would you like from this? Want me to

I?m setting up a new system and installed a new UPS with nut. System Specifics: OS: Debian 3.16.36 Nut version: 2.7.2 Install method: apt-get Device: TRIPPLITE SMART1300LCDT using usbhid-ups driver Problem: The output from upsc has a few incorrect values. They appear to be a matter of scale. root at server:/etc/nut# upsc tripplite at localhost Init SSL without certificate database

On Aug 17, 2015, at 11:56 AM, Johnny Wong <e430benz98 at yahoo.com> wrote: > > > What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) > > FreeBSD 10.2-RELEASE #0 r286738M Okay, thanks. I think this is the first report of FreeBSD 10.2, so hopefully it is not an issue inherent in the OS. I will see if I can upgrade one of my machines to

On Aug 19, 2015, at 9:00 AM, Charles Lepple <clepple at gmail.com> wrote: > > On Aug 19, 2015, at 12:08 AM, Johnny Wong <e430benz98 at yahoo.com> wrote: >> >> Here are couple of things I tried. >> >> 1) Changed the USB cable. Same problem >> 2) I put an old CyberPower CP550SL w/USB&SERIAL and it recognize it right away via the USB

Here are couple of things I tried. 1) Changed the USB cable. Same problem 2) I put an old CyberPower CP550SL w/USB&SERIAL and it recognize it right away via the USB port I don?t know if that will give you any insight or eliminate certain things with the Tripp Lite SMART1300LCDT or not. Sent from Mail for Windows 10 From: Charles Lepple Sent: Tuesday, August 18, 2015 6:37 PM To: Johnny

I have gotten the links to the ./configure for NUT for NAS4Free see nas4free build makefile http://sourceforge.net/p/nas4free/code/ ... t/Makefile config files: http://sourceforge.net/p/nas4free/code/ ... nut/files/ I hope this give some insights On Wednesday, August 19, 2015 6:00 AM, Charles Lepple <clepple at gmail.com> wrote: On Aug 19, 2015, at 12:08 AM, Johnny Wong

On Aug 17, 2015, at 1:00 AM, Johnny Wong <e430benz98 at yahoo.com> wrote: > > OS = NAS4Free (FreeBSD Revision: 199506) What does that revision number correspond to in FreeBSD release numbers? (e.g. 9.3, 10.0) > NUT Version = 2.7.3 for other parts of NUT version is listed below > NUT is part of the NAS4Free distribution > Device = Tripp Lite SMART1300LCDT URL

>Just for grins, can you try adding "usb_set_altinterface" to the ups.conf section for your UPS, and see if that changes this part of the log? (That is, after "[upstl1300]"). Here is the output with the usb_set_altinterface?added to ups.conf or at least partially output because it keeps going in a loop. ? 46.820206???? Checking device (09AE/3016) (/dev/usb//dev/ugen0.5) ?

> Is it possible that there is another copy of the driver running in the background? There is apparently an issue where we only >write a PID file when the driver goes into the background, and "-D" prevents that. I don't see another usbhid-ups running ... unless its "hidden".... I would have to install the unhide package then.... /var/run/devd.pid

Did my last message get through? I got a message from the list saying it "bounced" or something like that? Sent from Mail for Windows 10 From: Charles Lepple Sent: Wednesday, August 19, 2015 6:00 AM To: Johnny Wong Cc: nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Need help with Tripp Lite SMART1300LCDT NUT v2.7.3 On Aug 19, 2015, at 12:08 AM, Johnny Wong

[please use reply-all to include the list - the NUT lists do not add a reply-to header.] On Oct 23, 2015, at 2:03 AM, Null <null at wuffleton.com> wrote: > > Hi List, > > I recently picked up a Tripp Lite SMART1500LCDT while they were on sale to pair with my home server, and have tried getting it set up with NUT, since it seems to be supported. I can get the whole NUT stack up

I bought this UPS to use with NUT. I've used Belkin, APC, CyberPower, Best, Powerware upses with NUT on dozens of servers beginning with RHEL3. http://www.amazon.com/Tripp-Lite-Display-Protection-SMART1500LCDT/dp/B009TZTGWK Since this was advertised as USB HID, I didn't expect any problems. Bad idea (should have gotten the Cyberware with somewhat less runtime). Initially, it seems to

Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType =

On Aug 19, 2015, at 12:08 AM, Johnny Wong <e430benz98 at yahoo.com> wrote: > > Here are couple of things I tried. > > 1) Changed the USB cable. Same problem > 2) I put an old CyberPower CP550SL w/USB&SERIAL and it recognize it right away via the USB port > I don?t know if that will give you any insight or eliminate certain things with the Tripp Lite