similar to: Atlantis-Land UPS with Cypress CY7C63723 chip (cypress_m8 driver) support

Hello Charles! As promised, I just checked out the CVS and recompiled everything. In the attached .txt is what is coming out from my UPS. I am wondering about all those zeroes. Also, this morning I plan to connect the UPS to a Win box running the monitoring program supplied with the UPS (UPSilon2000) and a USB sniffer program. If you have any suggestions on what to look for in the data,

*********************** Your mail has been scanned by InterScan MSS. *********************** Has anyone managed to get this UPS to work? I am using the laster development nuts. My /proc/bus/usb/devices content: ==== cut ==== T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=ffff ProdID=0000 Rev= 1.00 S:

I have a Belkin F6H500ukUNV ups that I am attempting to get working under nut, however it does not appear to be detected by nut, I'm assuming that I need to feed some information back to you guys to get it included in the database somwhere. I've included (what I can think might be) the relivant outputs. Please let me know if you require anything else. dmesg output /sbin/newhidsups

Hello Peter! Peter Selinger wrote: > This is useful information. I don't think the device is currently > supported, but the information printed above is enough to write a > subdriver for it. Note that the purpose of the "-x generic" option is > precisely to produce this output. [...] >> Apparently the UPS is recognized but no communication is >>

Hi again, Thanks for the prompt reply. Just for the record i am running debian unstable/sid with nut 2.7.4-3 # dpkg -l 'nut*' | grep ^ii ii nut 2.7.4-3 all network UPS tools - metapackage ii nut-client 2.7.4-3 amd64 network UPS tools - clients ii nut-server 2.7.4-3 amd64 network UPS tools - core

I am having an issue running NUT and using an TrippLite OMNI900LCD. When I run ./upsdrvctl start I get : [player@V0002-S002 bin]$./upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0) Detected a UPS: Tripp Lite /TRIPP LITE UPS Using subdriver: TrippLite HID 0.1 (experimental) dstate_setflags: base variable

I tested your fix (newhidups -DDD /dev/null) using both and APC Back-UPS 350 an APC Smart-UPS RT 2000 XL. No more segmentation fault due to the fixed-size array. ~Jacob -----Original Message----- From: nut-upsdev-bounces@lists.alioth.debian.org [mailto:nut-upsdev-bounces@lists.alioth.debian.org] On Behalf Of Peter Selinger Sent: Monday, October 16, 2006 12:12 PM To: Schmier, Jacob Cc: NUT

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD

Hi everybody, If we let the feature running, it appears that the driver gets unbound after a while ( variable from quarter of hour to 6 hours ) and cannot reconnect. This behavior appear with both MGE Ellipse ASR and non-ASR models with connection to an UHCI and OHCI controllers. The USB core is from 2.4.28 kernel. We use nut-2.0.3. Start, powerfail and recovery detections, UPS shutdown work

Hello, I am having difficulty using NUT to shut down my Netgate SG-1100 (a pfSense router) when the power level of the UPS gets critically low. Here is some relevant information: - OS: pfSense 2.4.5-RELEASE-p1 (FreeBSD 11.3-STABLE) - NUT version: 2.7.4 - Installed from: pfSense package 2.7.4_7 - UPS: AVR750U (Device release number 2) - I have included my config files, output from `upsc`, and

Thanks Kjell for the help with the build problem. Thanks for your input, too, Charles. Now I have a new problem that I think has already been solved. I have Tripp Lite Smart1000LCD UPS (usb), but I can't get the newhidups driver to communicate correctly. I found a thread on the development list from last December where Jonathan Freedman described had a problem with this UPS in a thread

I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own /lib/systemd/system-shutdown/nutshutdown, but now everything is working except for powering on and off the UPS. Regardless of the settings of offdelay and ondelay in upsconf, and regardless of whether the AC power is on, when I say "upsdrvctl shutdown" the UPS

Hello all, About a month ago Peter and Charles were kind enough to try to help me with getting a Tripp Lite USB UPS to work with NUT. I reported quite a bit of initial success, and then other things here fell apart. Between work, fence building and a week-long out of town business trip, I have had to drop this from my list of things to do lately. I am back at it, and I believe I will have

Hi, I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did

Hi, I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did

Hi, I have two ups (Turbo-X 1000SD, Turbo-X 1500SD). The both report themselves as # lsusb Bus 008 Device 002: ID 0001:0000 Fry's Electronics The are produced by MEC and report MEC0002 as product (although the working one report it in dmesg but not in lsusb) The 1000 (bcdUSB 1.00) works with blazer_usb while the 1500 (bcdUSB 1.10) doesn't. I am attaching lsusb and blazer_urb output

Oops... changing that to --with-user=nut solved one problem. I have the driver, upsd and upsmon running now. Thank you! Now I'm back to another issue, every 2 seconds I get in the logs: May 3 13:45:23 myhost upsd[2587]: Connected to UPS [eaton]: usbhid-ups-eaton It seems happy to do this forever. On Tue, May 3, 2016 at 8:17 AM, Charles Lepple <clepple at gmail.com> wrote: > On

Hi I am running FC5 with nut coming from the fc5 extras repositories. I am trying to configure a Gamatronic D-Compact ups. The cable that came with the ups has a serial connector on one end and a usb on the other. cat /proc/bus/usb/devices produces T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P:

[please keep the list CC'd] On 12/13/05, ngpost1 <ngpost1@etitech.net> wrote: > Charles, > > Another question: > > When I ran the newhidups -DD.... test, there apparently was no > communication with the UPS. Since I assume is talks with the Megatec > protocol, I wanted to force the protocol in the command line. As far as I know (and I am no expert on

On Jun 8, 2015, at 8:23 PM, Greg Hersch <hersch.greg at gmail.com> wrote: > Hi Charles. I patched, reconfigured, remake'd, remake install'd - but > no change. however, some more likely helpful information below for > you. Thank you Odd. Are you sure that the new version of usbhid-ups got installed to the same path you are running? Also, there is no protection against