similar to: Network UPS Tools (NUT) driver for Activepower 1400VA

Hello Tomasz, first, thanks for your feedback. > First of all, I want thank you for excellent NUT software :) It saved my ass > from BIG pain :) > > I want to confirm that NUT works with ActivePower UPSes (ActivePower is Polish > company). I have two machines: > > 1st machine: > * mainboard: Asus ATX with Intel Celeron 2.53 GHz, > * OS: openSUSE 10.1, > *

Hello, first of all I'd like to thank all the NUT developers for their gorgeous work and for their efforts to make NUT the best and most complete UPS management software I've ever seen (seriously). Secondarily I'd like to help the NUT project as far as my help is needed, I'm not a programmer (by now...) but I would like to help somehow anyway. I have 3 UPS from the same

Hi all, Currently, the "megatec" driver only supports UPSes which have a serial (RS232) interface. However, I'm under the impression that most of the models that speak the megatec protocol, and have an USB interface, just have a standard serial-to-USB converter inside. This being the case, there should be a "/dev/ttyUSBx" device which the megatec driver could use just as

Hi all, Currently, the "megatec" driver only supports UPSes which have a serial (RS232) interface. However, I'm under the impression that most of the models that speak the megatec protocol, and have an USB interface, just have a standard serial-to-USB converter inside. This being the case, there should be a "/dev/ttyUSBx" device which the megatec driver could use just as

Hi, I'm having a hard time configuring a Mustek Powermust 600VA ups to work via USB with nut. I read somewhere that nut works OK via the rs232 cable, but unfortunately I don't have a COM port in my computer. The kernel detects the ups as an Xbox pad :) and loads the xpad module. I tried running /lib/nut/megatec with different /dev/ttySx but it displays megatec protocol UPS was not

Arnaud Quette wrote: > Anyhow, I would more see this as a merge of all these drivers, with > some autodetection or flag/param to switch the mfr/model and maybe > capabilities... Whatever the driver name is, a good thing would be the > name of the protocol or something generic enough, though powermust is > fine. Ok, I made some minor changes to powermust, to make it less

Hi Shanan, Since I'm lagging too much on this point, I've forwarded your mail to the NUT development list, in the hope that another developer will have a bit of time to merge your patch. thanks for your contribution, Arnaud Quette -- Free Software Developer - http://arnaud.quette.free.fr/ Debian Developer - http://people.debian.org/~aquette/ Network UPS Tools (NUT) Project Leader -

Markus Layr wrote: >Hi, > >thanks for the mustek driver for the nut packages. >It works nearly perfect for my Mustek PowerMust USV 2000VA. > >There is only a little problem concering the battery.charge, perhaps you >can help me to solve it. > >I always get 100.0 as value for the battery.charge, it never changes. > >Regards, >Markus Layr > >

Hi all, I just bought a Trust 1000VA PW-4105 UPS. I installed the UPS on FreeBSD 6.1, and installed NUT 2.0.3 via the FreeBSD port. I had no problems installing and configuring nut and the UPS to run with the PowerMust driver. My problem however is when I test the powerdown function by issuing the command: 'upsmon -c fsd' The UPS is cutting the power before the shutdown procedure

On 1/23/07, Henning Brauer <hb-nut@bsws.de> wrote: > good new first: the megatec driverin 2.0.5 now works with the Online > Xanto S3000R here - well, for the very basics. > > the UPS has NO way ofidentifying itself. It also does not respond to > the power ratings query ("F"). I previously used a hacked up fentonups > driver. This means the driver cannot figure out

Dear R-Help Team, I have been trying to sort (all columns of) a matrix: > a<-matrix(a<-c(1,3,4,6,6,4,6,56,4,64,86,39,4,2),length(a),2) > a [,1] [,2] [1,] 1 1 [2,] 3 3 [3,] 4 4 [4,] 6 6 [5,] 6 6 [6,] 4 4 [7,] 6 6 [8,] 56 56 [9,] 4 4 [10,] 64 64 [11,] 86 86 [12,] 39 39 [13,] 4 4 [14,] 2 2 > I

On 8/15/2017 6:13 AM, Charles Lepple wrote: > On Aug 10, 2017, at 12:19 AM, Harlan Stenn wrote: >> >> 0.447497 HID descriptor length 37 >> 0.450449 Report Descriptor size = 37 >> 0.451062 Using subdriver: PowerCOM HID 0.5 >> 0.451996 3 HID objects found >> 0.453502 Path: ffa00001.ffa00001, Type: Input, ReportID: 0x00, >> Offset: 0, Size: 8,

Hi Marcello, Marcello wrote: > a few days ago I bought a "Tecnoware Easy Power 1200" UPS for my little Linux > server, and in these days I haven't found nothing on the net apart the > "driver" for Linux (written in Java) on Tecnoware site (www.tecnoware.com<http://www.tecnoware.com> ). > So i tried NUT: while trying one by one all the possible supported

Hello ! first off, thank you all for making this piece of software. from what i have seen so far this seems to be a really mature and advanced tool for all sorts of UPS models ! I`d like to tell that I own a UPS which isn`t listed on the compatibility list, but seems to be compatible. It is a PowerWalker - see this at

Hello ! first off, thank you all for making this piece of software. from what i have seen so far this seems to be a really mature and advanced tool for all sorts of UPS models ! I`d like to tell that I own a UPS which isn`t listed on the compatibility list, but seems to be compatible. It is a PowerWalker - see this at

Disclaimer: I've setup APC UPS monitoring and it works... ... but when it comes to mustek powermust 600usb (connected via com-port), I can't make it work. Got NUT installed via aptitude in ubuntu feisty and a basic setup, exactly the same as for the apc, except for the name of the ups and the corresponding section of ups.conf -- [mustek] driver = megatec port = /dev/ttyS1

Hi folks, has anyone been successful in getting a Mustek PowerMust 500 to talk to nut? All my attempts (tried "mustek" and "powermust" as drivers) have been unsuccessful so far. Thanks for any clues. Sascha -- http://yoyodyne.ath.cx

Dear Roger Koenker, I have had just the same problem (rgl.snapshot returns "failed") on my Fedora Core 6 system. It took me quite a while to figure out the solution, so I would like to post it here to make others' lives easier. My configuration: Linux zachariasz.dns6.org 2.6.18-1.2869.fc6 #1 SMP Wed Dec 20 14:51:19 EST 2006 i686 athlon i386 GNU/Linux Fedora Core 6 R version

Hi Peter, I've fwded your info to the list, as other people might be interested in. I've also logged a patch tracker so that you can follow its inclusion: https://alioth.debian.org/tracker/index.php?func=detail&aid=302882&group_id=30602&atid=411544 As a side note, there is a work underway to merge the similar driver (mustek, powermust, ...) into one named megatec. This one

After trying the 'powermust' driver I can confirm it works well with the F6H500ukUNV ups from Belkin. I reported my tests but by accident posted them directly to Carlos and not the mailing list (sorry Carlos). Anyway brief summary of the powermust driver with the F6H500ukUNV; Detects Online state. Reports the Battery charge correctly. Detects On Battery State. Detects Low Battery State.