similar to: Way to override battery.charge.low?

Hi, After I do a : upscmd ellipse@localhost test.battery.start How do I tell its running, what the status is, etc. Thanks, Tuc

Hi, I'm running into an issue while using FreeBSD 5.4, NUT from ports (2.0.3), serial on /dev/cuaa1, Ellipse 1200 USBS. The ups.conf is : [ellipse] driver=mge-utalk port=/dev/cuaa1 desc="Telecom Closet Ellipse" When I go to start it I get : Network UPS Tools - UPS driver controller 2.0.3 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.87 (2.0.3)

Hi, FINALLY got my UPS working, YEA!!!! But now it brings up even more issues.. (BOOO!!) 1) I'm thinking this is a UPS issue, but when I pull the plug on my UPS, it goes from 100 to 30 in just a short amount of time (Minutes). This causes the machine to shut down. But once it gets to 0, its beeped its little heart out for a few more HOURS providing power to the non-system items perfectly.

Hi, I took the advice of Daniel O'Connor, found out what variables I had available to me, and put them in the conf. So now it looks like : [ellipse] driver = mge-shut port = /dev/cuaa0 desc = "UPS" lowbatt = 5 offdelay = 120 let the UPS charge up fully, 24 hours. I plugged a single lamp into it, with a 60W bulb. At 3:40p

Dear fellow NUT-UPS users, I'm writing this message mostly "for the record" - for others who will follow in my footsteps. Apparently, I'm not the only one, trying to find a way to "make my UPS to initiate the graceful shutdown process earlier". The topic is kind of documented in various different places, and there are a number of howto's and forum posts in the

*Platform: Proxmox VE 8.1.4NUT version: Network UPS Tools upsstats 2.8.0* I configured Proxmox and I can pull up the UPS stats. Typing in `*upsrw -l cyberpower at localhost*` I get the following: *[battery.charge.low]Remaining battery level when UPS switches to LB (percent)Type: STRINGMaximum length: 10Value: 10[battery.runtime.low]Remaining battery runtime

Hi there, my HP R1500 G3 UPS doesn't apply my battery.charge.low value i set via upsrw. Is this a common problem with this model in nut 2.6.4? Any ideas how to force the UPS to accept this value? Regards Jan % upsc hp1500 battery.charge: 100 battery.charge.low: 20 battery.charge.warning: 20 battery.runtime: 23917 battery.temperature: 49.0 battery.type: PbAc battery.voltage: 39.0

Very good point. I hope to write a beginners guide -- more like adopting my notes --on NUT. I could summarise your point that technically one should only override settings that NUT can act upon (like those settings that control Low Battery or, as stated in the documentation if the reported value is known to be incorrect. Overriding a variable that is out of scope for NUT (as with

I got around to unplugging my UPS and I found it doesn't last nearly as long as estimated. Is the "upsmon[1446]: UPS desktop_ups at localhost battery is low" logged when "battery.runtime:" = "battery.runtime.low: 120"? Does any make better batteries that don't go down faster when they get old? battery.charge: 100 battery.charge.low: 10

Hi, I've got a remote system that was down and came back up. I'm trying to get into the system, but when I do I get timed out. I forced it to a keyboard interactive to speed things up: ssh -o PreferredAuthentications=keyboard-interactive -vvv tuc at 10.2.0.2 but I get : debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: done:

On 28 May 2014, at 21:59, Charles Lepple <clepple at gmail.com> wrote: >> What would log it? > > The driver. OK. >> I could try running the driver with debugging and see if that shows anything of interest. > > That should help. Unfortunately for non-debug operation, it appears that most of the usbhid-ups instcmd messages are buried at debug level 3 or 5. That

On May 28, 2014, at 8:59 PM, Daniel O'Connor wrote: > On 28 May 2014, at 21:59, Charles Lepple <clepple at gmail.com> wrote: >>> What would log it? >> >> The driver. > > OK. > >>> I could try running the driver with debugging and see if that shows anything of interest. >> >> That should help. Unfortunately for non-debug

On May 27, 2014, at 9:59 PM, Daniel O'Connor wrote: > > On 28 May 2014, at 10:54, Charles Lepple <clepple at gmail.com> wrote: >> On May 26, 2014, at 8:21 PM, Daniel O'Connor wrote: >> >>> However if I do either of the tests upscmd just reports 'OK' and nothing happens. >> >> Anything in syslog? > > Not that I can see :( >

An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141111/7dd98eaa/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: usbhid.zip Type: application/zip Size: 5991 bytes Desc: not available URL:

Dear NUT user, You are right concerning the autonomy calculation on Ellipse 650 UPS ("Low End" small Off Line UPS) => the estimation is not really accurate (and also a little bit pessimistic) => this is a known limitation that was documented on the previous NUT mailing list (before Alioth.org) MGE will stop soon the production of these models and will sell Protection Center and

Hi, I'm looking to backup a small network (Hughes DW7000 satellite modem, small consumer grade Internet Broadband router+wireless, Soekris NET4801 single board computer + 4 port lan card, Cisco 2900 switch) and want a small form factor (This is sitting on a small shelf) and light. The main thing I'm running into is that it *HAS* to be serial. (The Soekris only has 1 USB port and I

Hi, Anyone have any experience with these ??? http://cgi.ebay.com/UPS-1000VA-Brand-New_W0QQitemZ280141461506QQihZ018QQcategoryZ99265QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Thanks, Tuc

I have samba clients authenticating to Windows ADS through winbind. All works perfectly, but I don't how to enable my linux users to change their password (on the windows machine) from the linux box. Although there is a great deal of documentation on the internet, I could not find anything specifically to this... A small howto on what smb.conf/pam/nsswitch/xxx parameters are required to

On 28 May 2014, at 10:54, Charles Lepple <clepple at gmail.com> wrote: > On May 26, 2014, at 8:21 PM, Daniel O'Connor wrote: > >> However if I do either of the tests upscmd just reports 'OK' and nothing happens. > > Anything in syslog? Not that I can see :( What would log it? I could try running the driver with debugging and see if that shows anything of

I'm sorry about a wrong place to address, because my problem most likely is in a hardware, not the NUT software. I had tried to contact the MGE support team, but got no answer. I have purchased the MGE Ellipse 650 UPS, and after testing it with the Linux/NUT package (v. 2.0, mge-shut driver) found out that the battery.charge indicator and related things (battery.lifetime, low battery signal)