similar to: newhidups, usb permissions and Debian

2005/9/25, Peter Selinger <selinger@mathstat.dal.ca>: > > Arnaud Quette wrote: > > > > Some more points while you're at it: > > - newhidups will have to be renamed. My aimed was to let the name until > we > > can superceed hidups. Then remove hidups, and rename newhidups to > usbhid-ups > > (name proposition welcomed, but should match the fact

Hi Arnaud, hi all I wish you all the best for 2006. Enjoying of some less stressed time, I follow your advice, Arnaud, to switch our UPS management on the newhidups driver. ( Enfin ! ;) Our goal is to support (soon) the new MGE ASR ELLIPSE ( and of course also the old ELLIPSE and EXTREME models ). I rebuild the libusb-0.1.10a packages to conform to our installation process. I perform the same

I can start the driver successfully manually, after the machine is up and running, but at boot time, it can't find my UPS. My init script makes sure that the usbfs is up (by checking for the existence of /proc/bus/usb/devices), and I can't think of what else could be different with the boot-time failure versus the manual startup after logging in. I'll include my configuration at the

Hi all, I just downloaded, built and installed nut-2.0.4-pre2. I have an APC Smart ups 3000 connected via a usb cable. I have compiled and installed the usb drivers. I installed the libhidups and libhid.usermap per the README. I have the following ups.conf: [APC-3000-ups] driver = newhidups port = auto desc = "APC smart 3000" When I try to start the driver I get the

[FAQ on USB-connected UPSes] > Remember: this is brand new *experimental* software and is probably > very broken. Do us a favor and report successes or failures to > the mailing lists. No problem ... : UPS: Liebert PowerSure PSA 500 NUT: Version 2.0.2 Kernel: 2.6.11.5, with CONFIG_USB_HID, CONFIG_USB_HIDINPUT, and CONFIG_USB_HIDDEV compiled in (statically)

Hi Kiko, 2006/2/25, Kiko Piris <menorqui@pirispons.net>: > Package: nut-usb > Version: 2.0.3-1 > Severity: important > > > When newhidups loses comunication with ups (G), it dies when trying to > reconnect with the error: > > *** glibc detected *** double free or corruption (fasttop): 0x08068268 *** > > Following is a copy&paste of the last lines of

Just a little tiny detail : ============================================================================== > --- trunk/scripts/hotplug/libhid.usermap (original) > +++ trunk/scripts/hotplug/libhid.usermap Fri Aug 25 19:18:19 2006 > @@ -21,5 +21,7 @@ > libhidups 0x0003 0x09ae 0x1003 0x0000 0x0000 0x00 0x00 0x00 0x00

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

Hello everybody, After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on customized Linux kernels, we are now facing a new challenge : trying to install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel. I picked up the 2.0.5 source package and follow the INSTALL doc until step 6. So far so good. RH ES4 is managed by udev, therefore I presume we

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

There is a memory leak in newhidups. After 23 days uptime it used 138M memory. Apart from the memory leak, the system works ok. Is there anything I can do to help fix this problem? Tor. [root@tophat init.d]# ps -unut v PID TTY STAT TIME MAJFL TRS DRS RSS %MEM COMMAND 21122 ? Ss 1:35 0 69 137934 136800 27.0 /sbin/newhidups auto 21125 ? Ss 0:37 0

Hi, I'm running nut 2.0.3 on Gentoo connected to an MGE ProtectionCenter 675. newhidups intermittently crashes. Any ideas? N. # /usr/lib/nut/newhidups -a mgeups Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) Detected a UPS: MGE UPS SYSTEMS/PROTECTIONCENTER Using subdriver: MGE HID 0.8 This is the error I'm getting *** glibc detected *** /usr/lib/nut/newhidups: double free or

Dear List, I have an MGE Ellipse 1500. I run openSUSE 10.2, kernel 2.6.18, libusb 0.1.12, nut 2.0.5. ps shows that the following processes are running: /usr/lib/ups/driver/newhidups -a mgeups /usr/sbin/upsd -u root /usr/sbin/upsmon /usr/sbin/upsmon NUT operates correctly, shutting down the server after 4 minutes without power. However I'm seeing 25 to 50 messages logged each day in

Hello, I am having trouble getting upsd to start. I am using the Debian NUT packages version 2.0.3 (current in Debian/sid). I am using the newhidups driver with an APC Back-UPS BR 800. The init.d script wasn't functioning, so I backtracked to running upsd manually and I get: foxstar:/etc/nut# upsd -u root Network UPS Tools upsd 2.0.3 Can't connect to UPS [foxstarups] (newhidups-auto):

I ran into the following issue today and would like some feedback from the group. Setup: I am using a MGE Pulsar Evolution 2200 UPS connected through a Belkin (F5U218-MOB) 4-Port USB Hub. Scenario: The newhidups subdriver_matcher function calls belkin_subdriver->belkin_claim. The belkin_claim function in belkin-hid.c matches the VendorID of the hub to Belkin's VendorID (0x050d), causing

Have recently purchased a MGE Nova 1100 UPS and am trying to get running on netBSD. Configuration netBSD 3.0 amd64 libusb 0.1.10a nut 2.0.3 Built & installed libusb Built kernel with ugen device and uhid removed Build & install nut-2.0.3 with usb Chmod /dev/ugen1 etc to allow access by nut user. Ups.conf [MGENova] driver = newhidups port = auto

I'm using an APC Back-UPS XS with nut 2.0.3. I've recompiled/reinstalled the source, and switched over to the newhidups driver (instead of the old hidups driver). I modified by ups.conf to use newhidups. The hotplug files were not automatically installed, I had to copy those from the scripts directory to my hotplug/usb directory. The newhidups driver loads find and then works for a

Thought I would write some notes about how I got an APC BackUPS XS 1500 working with newhidups under Gentoo 2006.0. The specific issue here is the permissions on the device files used that libusb uses to access the USB hardware. I followed Peter Selinger's instructions at http://www.mscs.dal.ca/~selinger/ups/backups.html on getting newhidups going with an APC device. The sticking point for