similar to: can't get UPSDRV to see serial port

Hi, I've browsed the archives back for a few months and nothing has jumped out at me as being helpful, but since there doesn't seem to be a search facility it's certainly possible I've missed what I'm looking for. Anyway, I wonder if someone can help me. I've very recently installed nut 2.0.4-r1 on a gentoo box and am in the initial stages of configuration and testing.

I have a new APC Smart-UPS SUA2200RM2U. I've had no success with the manufacturer's PowerChute software and smart signaling, so I have decided to try NUT. The smartups driver can't make contact through the serial port. Since this is rack-mounted, it comes with a 940-1524 serial cable. As far as I can tell, this is supposed to work with smart signaling. Here's my ups.conf:

I just installed nut, and I it is detected but I don't get any usefull information. I have the serial cable that came with it which is a 940-0024C and I tried setting that in the driver, but no difference. What can I do to get stuff like battery voltage and such? Thanks, Brian upsc ups1 at localhost driver.name: apcsmart driver.parameter.cable: 940-0024C driver.parameter.pollinterval: 2

Hello. I've been running a two machine setup with a mge-shut for some time without problems, and now I'm configuring a three machine setup with an APC Smart 1500. The UPS has three machines connected to it, in a peculiar way: one windows machine is connected via USB. The second windows machine is using an agent to monitor messages from the first windows machine. Then, I have a GNU/Linux

Hello all, Rebooted my server by mistake (don't ask...) - everything was working OK before the reboot, but after the reboot, NUT stopped working - so had a look and I found I couldn't track the exact problem - I'm quite stumped as there's nothing indicating that there's a problem, but it just doesn't work... In a nutshell.... destiny:/usr/local/ups/bin# ./upsdrvctl

Hello all, Rebooted my server by mistake (don't ask...) - everything was working OK before the reboot, but after the reboot, NUT stopped working - so had a look and I found I couldn't track the exact problem - I'm quite stumped as there's nothing indicating that there's a problem, but it just doesn't work... In a nutshell.... destiny:/usr/local/ups/bin# ./upsdrvctl

On 02/13/2018 03:49 AM, Charles Lepple wrote: > On Feb 12, 2018, at 11:53 PM, David Melik wrote: > > On 01/21/2018 05:53 AM, Charles Lepple wrote: >>> If you hook up a terminal emulator to the comms port (1200 baud, 8/N/1 unless stickers and/or configuration DIP switches indicate otherwise), and type "f" <return>, do you get a status line like one of the

I am trying to test the T1 card in our legacy PBX but the connector to the card is a 15 pin serial cable. I would like to make it myself so I can try this test today. Does anyone have a pinout for it? I just made a T1 RJ-45 loop back to test my TE110P and it tested out fine. I'm trying to resolve some timing issues and a tech from Digium is going to ssh in and walk around my asterisk server

I have a Dell PE 2850 connected via 940-0024C cable to serial port on the UPS mentioned above. I've used apt-get to install nut-2.0.2-3 and attempted to configure based on the documentation. So far I'm getting the following when I try to start ups daemon: server:/etc/ups # /etc/init.d/ups start Starting service NUT: -> Starting UPS driver: Network UPS Tools - UPS driver controller

Hi, Here's the message when I try to stop upsdrv daemon (/etc/init.d/upsdrv stop) * Stopping UPS drivers ... Network UPS Tools - UPS driver controller 2.4.3 Can't open /var/lib/nut/usbhid-ups-auto.pid: No such file or directory Here's the message when I try to start upsdrv daemon (/etc/init.d/upsdrv start) * WARNING: upsdrv has already been started. And finally here's

Hi, What driver should i use with APC BK-300C ? Michale Plourde Digicom Technologies

Hello! I got my hands on a CyberPower 1500AVRT, and i'm trying to get it connected to my Gentoo machine. I've followed all the basic guides on setting up NUT and UPS' but have had no luck. My current ups.conf is: [cyberpower-gentoo] driver = cyberpower port = /dev/ttyS0 desc = Workstation Upon running /etc/init.d/upsd start or upsdrv start I get: * Starting

I can't seem to get NUT to connect to my new PowerWare (Eaton) 5115. (Linux 2.6.34.1 x86_64, Gentoo) # /etc/init.d/upsdrv start * Caching service dependencies ... [ ok ] * Starting UPS drivers ... Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3) USB communication subdriver 0.18

Hi, I have a Comapq T2400H model 242688-003 and do not have the special cable to connect it to my serial port. I have tried all sorts of cable wirings that I found on the net, including ones for the powerware 5119 which appears to be the same model. I have read the documentation that comes with NUT, tried to read the source code and looked at the genericups code too.? I have

I have trouble in getting communication work with MGE Ellipse 500. I bought it second hand and I don't have the cable for it. How do I know if it's the Serial or USB model? The serial number of the unit is: 769B16015. I suspect it is the serial version as the label next to the RJ11 stands "com port", but I can't be 100% sure. MGE Ellipse serial cable pinout can be found

Hi all, I hope this is possible. I have a server, with a network switch attached to the serial port, and I want to rescan the serial port (/dev/tty) to see if it picks it up? I'd prefer not to reboot the server if at all possible. dmesg reports ttyS0 as the active port: [root at zabackup01 ~]# dmesg |grep tty Bootdata ok (command line is ro root=/dev/System/root rhgb quiet xencons=tty6)

I'm upgrading from CentOS6 to CentOS 7. I run 2 weather stations on C6 and have one of them attached to ttyS0 which is on the motherboard, and the other to ttyS2 which in on an add-on PCI serial card. I'm migrating the weather stations another host running C7 which has a similar hardware configuration.? When I connect the weather station to ttyS0 everything works fine, but when I try

Hello, I've got RFID card reader plugged in serial port. cat /dev/ttyS0 ...gives me ID of the card I'm using => that's OK As soon as I open the port with win32 appication via wine... I get no data from reader. Even cat /dev/ttyS0 does not work anymore afterwards. I thinks it's because as soon as application opens it via wine some tty flags change: (PS: Of course I created

Alex, thanks for your soon answer, but in case I want to configure PPP on this server, what files do I have to configure? Can I login in this server using SSHD over a PPP conection? Regards; Israel > Just terminal access -> I want to login in my linux server connecting > through the modem connected in /dev/ttyS0 Not sure if this is complete. Install mgetty if not already present on

When adding the keyword serial="pty" to a xen cfg file, I am able to open /dev/ttyS0 in my dom-U linux kernel environment and send serial data to a /dev/pts/x port in my dom-0 linux environment. If I happen to have have multiple dom-U''s configured this way, what is the best way to determine how these ports will be mapped so I will know which /dev/pts port belongs to which