similar to: Will MGE-UPS Ellipse USBS auto shutdown?

Hi there, I've replaced yesterday my old UPS with a brand new "Eaton Ellipse MAX 600 USBS". I've choosed the Eaton (previously MGE) both because I've always been extremely satisfied with MGE UPSes of all kinds at work, and because of the involvement of MGE (with Arnaud) in nut development, which made me quite sure that I would have no trouble with an Eaton (MGE) UPS and

Greetings Arnaud and others, I've been using NUT with Gentoo Linux for a couple of years now. I recently installed SUSE Linux 10.0 and I'm having difficulty getting it to recognize my UPS (MGE Ellipse). I tried the MGE-PSP package, but the GUI crashes immediately on startup. I decided to get just NUT running correctly before worrying about that. I uninstalled MGE-PSP and am left wtih

[fwded to the list] Hi Fran?ois, > I didn't post this on the list as it seems a little bit more MGE > stuff than nut. Anyway feel free to post it if you consider it's > relevant. > > This is the trace you were asking for. The Ellipse 800 correctly shut > down in this test : > > This was running on a i386 recent hardware, the cpu load is under 5%, > 360MB out of

I'm struggling to configuring nut for MGE Pulsar Ellipse 800 (at least Ellipse 800) for two boxes - home firewall and file server. I'm using Debian 4.0 Etch, every one of them. I'm built (after some dangerouse experiments) a testing configuration, where boxes are plugged to line, server playing as a master, firewall as a slave, and UPS connected to an electric heater about 300 Wats (no

Hello happy nuters, Some complementary words about making nut 2.02 successfully run on FreeBSD with MGE Ellipse. With the usefull information Arnaud sent, it's rather obvious that the erratic response of the ups to the shutdown script is linked to its difficulty to handle large traffic on the serial line. These are the final tweak I made to have this configuration satisfyingly

Hi, I've got two MGE Ellipse 1500 UPS connected via usb to an ubuntu jaunty system with nut and libupsclient1 2.4.1-2ubuntu4. As soon as I start the driver for the second one, they start fighting each other and I get no data. I found an older post to this list that said: If you want to monitor multiple UPSes through usbhid-ups, you *must* make sure that each one can be uniquely identified

Hi all, First of all thanks for the great work on nut ! (despite it's not fully functional yet overhere). Everything seemed to go fine until the final test : shutdown the UPS ! The system is running FreeBSD 5.3, the UPS is MGE Ellipse 800 USBS both linked with the MGE serial cable. The system is a remote server, only running some file services and large disks. The porting,

Hello, looking for replacements for some older Powerware equipment I found the MGE Pulsar Extreme 1000C and I'm currently testing one with nut-2.0.3 on a self-brewn i386-linux. Upto now everything seems to work fine - except I can't get the power outlets switching on again after mains returns. As this works with Personal Solution-Pac 2 on W2k I thought that there might be a way to

Hi I have Pulsar 1000 (MGE) and mge-shut 2.0.5-3. By default mge-shut don;t reboot ups after upsmoc -c fsd, only permanent powerdown. After I add ondelay=30 in config, all nice, ups restarted after 10 sec. But according man mge-shut ondelay measured in tens of seconds and by default equal 3. -- Olleg Samoylov

Fellows, back for 4 days, the baby and the mother are now at home, and the father is... hem, well not so fresh ;-) For those interested in some pictures: http://benjamin.quette.free.fr/ 2006/11/16, Peter Selinger <selinger@mathstat.dal.ca>: > ... > Arnaud: could you please amend the instructions on the NUT download > website http://www.networkupstools.org/source.html (Development

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

Okay, now that I've got NUT up and running with the newhidups driver, I can give it a quick shakedown. Most of the values look good, but are few are off. Here's what I get: elrond@foxstar:~$ upsc foxstarups@localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 3150/08/01 battery.mfr.date: 2005/03/22 battery.runtime: 1935 battery.runtime.low: 120

Hi again, As a followup to my previous post, just a couple words to add a comment on the numerous tests I did the past days. It was necessary to increase the waiting time in the /etc/ rc.shutdown, to wipe out the remaining problems (ups didn't shut down). # a rather large sleep to insure the ups stop babbling sleep 20 It appears the ups needs more than 20 seconds to

Hello, Ren?. > You can change the parameter > ups.delay.start into your UPS to set the "Interval to wait before > (re)starting the load (seconds)" > > use upsset to change the value. So far, the ups.delay.start parameter in my MGE Protection Center 675 has always been equal to the driver.parameter.ondelay parameter (which equals the ondelay argument in ups.conf).

Thanks for suggetions and keep me indumb about making of Debian packages:D I will try this package "nut_2.2.0-2_i386.deb" One little questionm, shoud I use newmge-shut driver? - my ups is quite old - more then 3 years, connected through serial cable. >> PS: Arjen de Korte suspected something was wrong around my "heater" load, >> for now I have used two 150W lamps

On 12/06/2013 10:57 PM, Kris Jordan wrote: > [...] > (*) Some UPS's do provide extra options to determine when they will > restore power to load. That would be a nice feature. Anyway, it is a strange thing that I can set the waiting time for power to be restored if main power comes back before offdelay has elapsed, but the UPS ignores this setting if main power comes back after

Hello nuters, FreeBSD, Ellipse USBS 800, serial line, nut 2.02 everything works fine. But I'm only able to get an automatic shutdown when reaching the built-in 30% level. I the "lowbatt parameter" is set to anything, it's simply ignored. This is a problem as I want to shutdown around 90% to avoid the battery to drain out when multiple shutdowns occur. Any idea ?

Hi developers, I would like to propose making a release soon from the current NUT trunk. There have been a lot of important changes since 2.0.5: new drivers added/refined (e.g. megatec_usb); the switch to Automake; the renaming of newhidups to usbhid-ups; automatic installation of hotplugging files; IPv6 support; improvements to the tripplite_usb driver; improvements to the gamatronic driver;

Angel Tsankov wrote, On 12/24/2013 1:22 AM: > On 12/06/2013 10:57 PM, Kris Jordan wrote: > > [...] >> (*) Some UPS's do provide extra options to determine when they will >> restore power to load. > > That would be a nice feature. > > Anyway, it is a strange thing that I can set the waiting time for > power to be restored if main power comes back before

2018-02-28 21:11 GMT+01:00 Jairo Rotava <jairo.rotava at gmail.com>: > Hello, > > I think that on this file nutdrv_qx_megatec.c the definition for > shutdown.stayoff may be wrong. In the file the definition is "S%sR0000\r"m > while on the megatec protocol description ( > http://networkupstools.org/protocols/megatec.html) the command is just > "S%s\r".