Displaying 20 results from an estimated 800 matches similar to: "MGE Pulsar M 3000 communication problems [USB]"
2007 Jan 15
1
NUT on VMWare ESX?...
Greetings:
Has anyone installed NUT on a VMWare ESX 2.x or 3.x platform?... The ESX
service console is essentially a RedHat 7 system with a bunch of
extensions for VMWare thrown in..
Regards,
Richard.
2006 Sep 28
3
MGE Pulsar M 3000 communication problems
Hallo,
I installed nut 2.0.4 on a Solaris 8 and tried two things:
First I wanted the ups to connect via usb, but I could not compile the
usb drivers. Make usb told me: no target named usb found
Second, because both ups and host have serial ports I tried to get it
working with serial.
The driver starts very fine, but takes a long time to detect the ups.
Upsd starts too, but while get in
2007 Jan 16
1
MGE Pulsar M 3000 - newmge-shut?
Hello all,
I wonder if the improvements to a driver called "newmge-shut" which have
been mentioned in October 06 got it to the 2.0.5 release?
I tried my setup again with this release and still get this
"communication lost -> established -> lost -> established" cycle.
USB was not working because of the Solaris 8 installation.
Regards,
Ingo
-------------- next part
2008 Apr 01
1
Incorrect battery status on MGE Pulsar M 3000
Hello!
We have two upses: MGE Pulsar M 3000 and MGE Pulsar EXtreme 3200C. They
connect to server by USB. EXtreme works good with usbhid-ups (nut 2.2.1) and
newhidups (nut 2.0.5). But Pulsar M doesn't want to work with usbhid-ups.
- my ups.conf:
[extreme]
driver = usbhid-ups
port = auto
product = "EXtreme"
[pulsar]
driver = usbhid-ups
port =
2011 Oct 06
1
Differences between USB and serial on an MGE Pulsar Evolution 3000
Hi,
I've been using NUT for many years to look after the UPS on my home
servers. Originally I was using a Compaq R3000 but that was replaced
with an MGE Pulsar Evolution 3000 about a couple of years ago because
the Compaq one was just too noisy!
I'm just setting up a replacement server and would like to connect it
using a serial cable as I've found that the USB connection
2007 Sep 10
1
mge-shut and hardware error on MGE Pulsar Evolution 800
Hello,
My MGE Pulsar Evolution 800 had some hardware troubles (it may be the
batteries according to the manual). The fault was not detected so the
power was cut to the load and nothing appears in the log files.
Arnaud: do you know if the UPS have some way to report this kind of
troubles to the PC so that NUT can handle it with a shutdown sequence ?
Philippe
2008 Feb 20
2
MGE pulsar evolution 3000 discharges without nut noticing
I'm running nut 2.0.1 with an MGE pulsar evolution 3000 with the
mge-utalk (serial) driver on NetBSD 3.1 .
I had a very strange occurance in my basement datacenter this early AM.
the following was logged by upslog:
20080219 023452 100.0 123.0 049.0 [OL CHRG] NA 60.00
20080219 023522 100.0 122.8 049.0 [OL CHRG] NA 60.00
20080219 023552 098.0 123.0 049.0 [OL DISCHRG] NA 60.00
20080219 023622
2006 Feb 07
1
MGE Pulsar STS
Hello,
I'm trying to communicate with a MGE Pulsar STS 16 using nut
under Linux, but I've had no luck so far. I haven't saw it
supported in the doc, so if there's anything I can try...
Thanks,
Arnaud.
--
Perso: http://launay.org/blog/
H?bergement: http://www.nocworld.com/
2011 Dec 22
1
[HCL] MGE Pulsar Evolution 1100 - not recognized by USB driver
(Sorry, I accidentally discarded the wrong message in the moderation queue - please subscribe to the list to avoid this in the future.)
> From: <onyx at netfusion.fr>
> Subject: [HCL] MGE Pulsar Evolution 1100 - not recognized by USB driver
> Date: December 22, 2011 12:15:16 AM EST
> To: <nut-upsuser at lists.alioth.debian.org>
>
>
> Hi everybody,
>
> It
2015 Oct 28
0
Random but persistent USB disconnect/reconnect with MGE Pulsar Ellipse Premium
Hi,
My UPS is MGE Pulsar Ellipse Premium 1200VA, connected on USB port,
usbhid-ups driver.
Using simply KNotify about UPS connection states I noticed that sometimes
unpredictably a notification appears that the USB connection to the UPS is
lost and a few seconds later another notification appears that the
connection is restored. And this repeats to infinity. The only way to get
out of it is to
2010 Feb 21
1
MGE Pulsar Evolution 1100 - USB - error sending control message
Hi all,
Have been using Nut on Linux for over ten years now and find it
brilliant. Thanks.
Just upgraded to 2.4.2 and have the 5 or 6 models of UPS's that we use
(apcsmart, megatec, mge-shut, surgemax, digitus) all working including
the MGE Pulsar Evolution 1100 on a USB connection using the usbhid-ups
driver. Running on SLES9. Old but we still have a few servers out
there running
2008 Oct 28
1
MGE Pulsar EX over serial problem (FreeBSD)
We have several systems in remote locations and I have found that the ones in
the US are having issues.. We are an Australian company and can't source a
110V UPS locally so we arrange to have one bought for the site when it's
installed.
It seems that in the US we are getting "Pulsar EX 1500" UPSs but locally we
buy "Pulsar 1500". NUT seems to work find with the
2007 Nov 15
0
somme trouble with ups mge pulsar M2200 and mandriva 2007 with nu t 2.2
hello,
I tested all config with my ups and psp
all seems to be OK
now, I had change ups name and user name in ups.conf, upsd.users,
upsmon.conf etc etc ...
but I have quickly these events in my syslog without doing anyting
what can I do ?
Nov 15 11:09:22 mezenc upsmon[3865]: Poll UPS [pm2200 at localhost] failed -
Data stale
thanks a lot for your help
Sabine GOUDARD
Ecole Nationale
2005 Oct 26
2
Best driver for MGE Pulsar Evolution 1100
I have an MGE Pulsar Evolution 1100 connected to a Debian box, with
nut-2.0.1 (the standard "sarge" packages). I have it connected through
USB, and I'm using newhidups.
However, about once a day the driver looses contact with the UPS and I
have to restart NUT to get it to drop the "data stale" nonsense (it
happens more often than this, but most times it recovers without
2007 Oct 29
1
Outlet switching on the MGE Pulsar 1500 using usbhid-ups on FreeBSD
I am running NUT 2.2.0 compiled from the FreeBSD ports tree.
[inchoate 14:50] ~ >upsc ups1 at localhost
battery.charge: 59
battery.charge.low: 20
battery.charge.restart: 0
battery.runtime: 6350
battery.type: PbAc
battery.voltage: 43.0
driver.name: usbhid-ups
driver.parameter.offdelay: 120
driver.parameter.ondelay: 13
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version:
2007 Oct 23
1
MGE Pulsar Ellipse 800 offearly or box shutdown late
I'm struggling to configuring nut for MGE Pulsar Ellipse 800 (at least
Ellipse 800) for two boxes - home firewall and file server. I'm using
Debian 4.0 Etch, every one of them.
I'm built (after some dangerouse experiments) a testing configuration,
where boxes are plugged to line, server playing as a master, firewall as a
slave, and UPS connected to an electric heater about 300 Wats (no
2007 Nov 08
1
UPS auto restart problem upgrading from nut 2.0.1-2.2.0 with MGE Pulsar EXtreme 700C
Hi,
Apologies if this is a known problem. I have just joined the list and
haven't done an exhaustive search of the archives. Also I am no UPS
expert, so please excuse me if some of my terminology is poor.
I use an MGE Pulsar Extreme 700C connected via RS232 to the linux server
it powers. I have recently upgraded to a new linux distribution. Both
new and old use 2.6 kernels, although
2006 May 11
0
MGE Pulsar Extreme communication problems
Hi,
I am trying to talk to an MGE Pulsar Extreme UPS over RS232 with the
mge-shut driver but I'm having some problems.
It appears to init OK but I can't, say, turn the outlets off, eg..
harrow:~>upsc mge@localhost
battery.charge: 78
battery.charge.low: 20
battery.runtime: 05760
driver.name: mge-shut
driver.parameter.port: /dev/cuad1
driver.version: 2.0.3
driver.version.internal: 0.65
2006 Jul 13
2
MGE Pulsar Extreme - restart problem
Hello,
looking for replacements for some older Powerware equipment I found the MGE
Pulsar Extreme 1000C and I'm currently testing one with nut-2.0.3 on a
self-brewn i386-linux.
Upto now everything seems to work fine - except I can't get the power outlets
switching on again after mains returns. As this works with Personal
Solution-Pac 2 on W2k I thought that there might be a way to
2007 Oct 23
3
MGE Pulsar Ellipse 800 off early or box shutdown late
> If you set lowbatt=70 then the behaviour you are seeing is normal. Don't
> set lowbatt and you'll get the default manufacturer settings which is
> LOWBATTERY at 30% charge level.
>
> Philippe
Thanks for quick response!
I realized this and forget this setting!
For now I think that my box does not recognize signal about low battery -
I'm only started to read SHUT