similar to: Unable to open /dev/cuad0: Device busy

Hello, I recently had a failure with my old MGE ESV8 ups, it just died on me so I had to get a new one. I found a MGE ESV8+ cheap and everything seems to work fine with it except the communication with the computer. The old ESV8 (non +) worked fine with NUT after applying some patches I got from the mailing list, but I think they are in the source tree now. I'm using the same cable that

I have a unisys UPS, I probed the RS232 and notice that pin 2, (receive data) is going from -6v (OL) to 12v(OB), but I don't see the setting for the genericups. Seems nobody else is using the RD pin? Any driver I can use? Thanks -Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello list- Anyone with Tripplite SMX1500XLRT2U (http://www.tripplite.com/EN/products/model.cfm?txtModelID=2687) successfully integrated with NUT through serial port? I'm trying to connect to SMX1500XLRT2U using serial cable shipped with UPS under FreeBSD 6.3-STABLE and NUT 2.2.2 installed from ports. Unfortunately, it looks like it couldn't be recognized. %dmesg | grep sio sio0:

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060322/b3ddf5ba/attachment-0001.pgp

Have anybody expirience with Ippon Smart Winner 750/1000/1500/2000/3000 with serial interface ? I have tryed megatec and blazer_ser drivers with no success: [IPPON] driver = megatec port = /dev/ttyd0 desc = "IPPON smart winner 1500VA" model = "Smart Winner 750/1000/1500/2000/3000" # ./megatec -a IPPON -DDD Network UPS Tools - Megatec

Hello, We are using the equipment "MUSTEK PowerMust 3000 NetGuard RM". That is using Megatec protocol. But unfortunately not all the data can be viewed correctly when dumping from utility "upsc". For example: upsbox# upsc mustek at localhost battery.voltage: 108.00 battery.voltage.nominal: 96.0 driver.name: megatec driver.parameter.pollinterval: 2 driver.parameter.port:

Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Hello, ahgu >I have a unisys UPS, I probed the RS232 and notice that pin 2, >(receive data) is going from -6v (OL) to 12v(OB), but I don't see the >setting for the genericups. Seems nobody else is using the RD pin? >Any driver I can use? >Thanks >-Andrew Try RX as signal name (not RD). -- Best regards, Sergiy mailto:rendol@mail.zp.ua

Hi Stefanos, I've forwarded your mail to the nut user mailing list, which is the right place to get support. thanks to subscribe to it (http://alioth.debian.org/mail/?group_id=30602). Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource

Hello all, Some time ago, you all were very helpful in getting nut running on an OpenBSD system, using--for what it's worth--a CyberPower 1500AVR. So I finally got my FreeBSD system's UPS, also a CyberPower 1500AVR, within reach of its serial cable and I'm trying to get nut running here. I'm going nuts. Basically, I copied the OpenBSD configuration over to the FreeBSD system

Hi, FYI for all whom have the Sweex manageable UPS. I got my sweex manageable UPS500VA working with NetworkUPSTools using the ippon driver. Here is my the ups.conf file: [ups] driver = ippon port = /dev/cuad0 desc = "Server" Has anyone tried the ippon driver with Sweex 600VA, 700VA, and 800VA models? Regards, Jan

I'm looking for people that are using the 'cyberpower' driver that has been available for some years now. It seems the overhauled 'powerpanel' driver could support your UPS too. The commands and status bytes used are identical, the only difference being the way the values read for battery charge, temperature and frequency are interpreted. If we can find a way to detect when to

I'm looking for people that are using the 'cyberpower' driver that has been available for some years now. It seems the overhauled 'powerpanel' driver could support your UPS too. The commands and status bytes used are identical, the only difference being the way the values read for battery charge, temperature and frequency are interpreted. If we can find a way to detect when to

Hi all, I just bought a Trust 1000VA PW-4105 UPS. I installed the UPS on FreeBSD 6.1, and installed NUT 2.0.3 via the FreeBSD port. I had no problems installing and configuring nut and the UPS to run with the PowerMust driver. My problem however is when I test the powerdown function by issuing the command: 'upsmon -c fsd' The UPS is cutting the power before the shutdown procedure

Hi Has anyone got a Compaq(/HP) T700 UPS to work with the BCMXCP driver? I've built yesterday's CVS of NUT 2.1 on one of my FreeBSD systems but chown root:wheel /dev/cuaa0 /usr/local/libexec/upsdrvctl -u root start gives: -- Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) Communications with UPS lost: Error executing command

Hello, let me first say that I do not have much experience with mailing lists, so I hope you can overlook any faults I might do in this process, nor is English my mother language. Secondly, I would like to thank all the developers of NUT, it truly is a great package of software and has made life easier for many of us. As I've understood the upsuser-list is also frequently read by the devs

Hi mongrel-herders, I''m just wondering what fellow railsers use to rotate their logs in an orderly fashion? I''d like to do something lightweight, i.e. (1) rename the logfile (2, optional) create a new empty logfile and (3) send a signal to each mongrel in the cluster and have them understand it''s time to reopen their log file handles. This is what I do with apache and

Hello, I have a UPS connected to my server with the following: Server is Suse 10.1 Nut version is?Network UPS Tools - Generic UPS driver 1.32 (2.0.4) I installed this around 2005 and cannot remember how I installed the software. ups.conf: [sdrups] driver = genericups port = /dev/ttyS0 desc = "For Server & Backup" upstype = 9 upsd.conf: ACL all 0.0.0.0/0 ACL localhost

Does anyone know if you can have multiple TE110P cards in one chassis? -Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061011/adbceeb5/attachment.htm

Hi list, i noticed from the cli my asterisk box is accepting unauthenticated calls how can i prevent this? CLI: -- Accepting UNAUTHENTICATED call from 192.168.0.2: > requested format = gsm, > requested prefs = (), > actual format = ulaw, > host prefs = (g729|ulaw|alaw), > priority = mine -------------- next part -------------- An HTML