similar to: Elsist Lily 1200 VA

Hi, I'm new of this list. I installed nut with apt on my ubuntu64, my ups is an elsist and with it I found the Driver's CDROM only for windows. It's branded Fenton but on it there is also printed Safenet. I had no particular problems installing nut with safenet driver. But when I'm trying to connect it with the command: upsc elsist@localhost i get this output driver.name: safenet

Have had no issue until I ran apt-get dist-upgrade this morning: # /lib/nut/newhidups -u nut -DDDDDD auto Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) debug level is '6' Checking device (0000/0000) (001/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device does not

Hi Volker Kuhlmann and Richard Nelson, As both of you are interested in where I got up to with getting my Dynamix 1000 VA UPS working with Linux, here is the details. It works.. But not too well, as the driver still seems to need some work, and is not in the main nut source as far as I know. It also seems to sometimes not respond when it should. The manufacture has uses the same format as

I had a look on the website, but I can?t see a detailed list of supported units. The model number is BX700UI. Best regards mikael festa The Studio, Cornfields, Portsmouth Road, Ripley, Surrey GU23 6ERt: +44 (0)1932 865 459 | e: mikael at treefrogdesign.tv <mailto:james at treefrogdesign.tv> | w: treefrogdesign.tv <http://www.treefrogdesign.tv/>This e-mail message may contain

# /lib/nut/megatec_usb -a myups Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with

Hi James, I'm referring to your post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-September/006201.html Have you got by chance any more info on the Dyamix 1000VA model? I was foolish to buy the USB version because it had a better display on the front. Is there any way to get this to go? I have tried all the USB drivers in NUT (on pfsense 2.0RC1) and none do anything

Hi Roger, Thank you for your advise. I tried driver = apcupsd port = auto But unfortunately I get the same error message ?Failed to execute command ?upsc 'ups' 2>&1': Error: Driver not connected" As I am not very good in using OMV, maybe there is something else I should do? Thanks Best regards mikael festa The Studio, Cornfields, Portsmouth Road, Ripley, Surrey GU23

Hi there, I tried all the driver on the list for this UPS, but they don?t work. Could you help me please? INFO: OMV 2.2.14 (Stone burner) Debian Release 7.11 - Linux nas01 3.2.0-4-amd64 Debian 3.2.93-1 x86_64 GNU/Linux HPE ProLiant Gen8 G1610T 819185-421 4GB RAM MicroServer NUT 2.0 installed from the Plugin Panel of OMV APC Back-UPS 390 Watts / 700 VA, 230V, AVR, IEC Sockets Best regards mikael

Hello guys, I have to manage an Eaton Ellipse ASR 750 VA UPS under a FreeBSD 8.2 server. I used nut from ports collection but I'm unable to detect the UPS by USB cable. Here is the output of 'usbconfig -u 4 -a 2 dump_device_desc' : ugen4.2: <ELLIPSE EATON> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110

The REDi Blazer 600VA (BLAZER600c) UPS found here [ro_RO]: http://www.emag.ro/ups-redi-blazer-600va-blazer600c/pd/EX5X2BBBM/ which is actually a Centralion Blazer 600VA [en_TW]: http://www.centralion.com/html/product/back-Product-ups-blazer400.htm works with the blazer_ser driver ----------shell output---------- # upsrw ups # upscmd -l ups Instant commands supported on UPS [ups]: beeper.toggle -

The server we are using is headless, I can?t install a desktop software unfortunately. That?s why I am trying to find a driver for NUT on OpenMediaVault. Best regards mikael festa The Studio, Cornfields, Portsmouth Road, Ripley, Surrey GU23 6ERt: +44 (0)1932 865 459 | e: mikael at treefrogdesign.tv <mailto:james at treefrogdesign.tv> | w: treefrogdesign.tv

Is there a chance to use NUT with a Liebert ITON 600 UPS?

Hi, I have recently purchased MGE ellipse 1200 UPS for my home system. Obviously, the choice of this particular brand was mainly dictated by MGE's long-standing support for Linux and NUT project. The fact that the box was clearly the prettiest looking one on the block did help also ;-). I have had NUT tools installed and configured in no time, as I did it numerous times before -- kudos

Hello ! I've just a problem with upsd/upsmon 2.0.4, please have a look at the upsc command: -------------------- battery.charge: 59 battery.charge.low: 5 battery.runtime: 1312 battery.voltage: 24.0 driver.name: newhidups driver.parameter.port: auto driver.version: 2.0.4 driver.version.data: MGE HID 0.9 driver.version.internal: 0.28 input.frequency: 0.0 input.transfer.boost.low: 184.0

Hi Marcello, Marcello wrote: > a few days ago I bought a "Tecnoware Easy Power 1200" UPS for my little Linux > server, and in these days I haven't found nothing on the net apart the > "driver" for Linux (written in Java) on Tecnoware site (www.tecnoware.com<http://www.tecnoware.com> ). > So i tried NUT: while trying one by one all the possible supported

Hi, Sorry for my poor english but it isn?t my native language. I?m testing an infosec E4 with nut-2.6.4-2.3 on Proxmox ve 3.0 (based on debian wheezy). The drivers that match this ups, is blazer_usb. Btw, I have try nut-2.6.5 with unstable repository from wheezy, but it still doesn?t fully work. I can shutdown my computer when battery is low, but unfortunately I can?t shutdown ups. Like said on

I'm back to trying to get my MGE Elipse (USB) talking to my FreeBSD system. It used to work fine on Linux (quite some time ago), and was sort-of working with the last release of nut. The system would see the UPS, but couldn't get reliable data from it. Now that I have upgraded to 2.2, I no longer see the UPS at all with nut. The usbdevs command shows it: drich at morpheus|505>

First off, my apologies for bringing back this thread from the dead (September 2005, http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-September/000150.html), however my problem seems relevant enough that I wondered what happened to this thread as it seems to have died after the message I quote below. Despite the fact that I am having trouble getting my Sweex 1000VA UPS (USB) to work, and

- OS name and version: Ubuntu 12.04 - exact NUT version: 2.6.3 - NUT installation method: from Ubuntu package "nut 2.6.3-1ubuntu1.1" - exact device name and related information: AtlantisLand Host Power 851 (A03-HP851 rev.1.1) - driver: blazer_usb I have no problems with the operation of NUT. My only problem is that I would like to change the behavior of the NUT driver

On Jun 6, 2018, at 5:18 AM, Walter HILL <hill at ieee.org> wrote: > > Does anyone know of a relatively recent guide to getting this UPS > running on a newer version of OS X? I am aware that Apple have been > re-engineering their startup process so I expect that getting the driver > to work may be the least of my problems. > To be honest, I have not seen much demand for