similar to: sweex 1000VA LB OB issue

Hi, I'm trying to get a sweex ups working with nut on debian sarge. This one: http://www.sweex.com/producten.php?lang=1&%20sectie=&item=59&artikel=95 It's shipped with UPSmart and according to the compatibility list it should work with the genericups upstype=7 driver. But it doesn't. I get: mybox:/etc/nut# /etc/init.d/nut start Starting Network UPS Tools: (upsdrvctl

Hi Mario, Mario Cassani wrote: > Hallo Arnaud, > some months ago I bought an SBS GC400 UPS. > I came with a kit RS232 + UPSmart CDROM that works only with RedHat 7.0-7.3. > As I use Debian I tried alien with no success. > > Can you please provide me with any hint to understand if my UPS can be managed by NUT? > Can a driver be written, knowing how the cable

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

I am using nut 2.2.2 and I have a CyberPower CP550SL. According to the drivers list, I should be using genericups with upstype set to 7, but when I try that and when I run upsc I get: driver.name: genericups driver.parameter.LB: 04 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ups driver.parameter.upstype: 7 driver.version: 2.2.2 driver.version.internal: 1.34 ups.mfr: CyberPower

Hello, have some of you tried sweex UPS 1500VA (http://www.sweex.com/en/assortiment/power-security/power-protection/PP220). It is not listed in hardware compatibility list. As I can see, sweex can be problematic with drivers, but it is not possible to change this UPS to other model now. It is connected by USB and lsusb says only: Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to

Dear Charles and team Just thought to share my findings getting a Sweex PP200 650VA UPS working with NUT (I didn't see this particular model listed on the HCL.) I picked-up one of these units quite cheaply at a Maplins store (before the chain closed-down) as a second UPS for my home/office - the first being an old Zigor Ebro650 - a long story for another post... NUT v2.7.4_7 is running

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the

Does this require a new entry in scripts/hotplug/* and scripts/udev/*? -- Peter Alexander Gordeev wrote: > > Author: agordeev-guest > Date: Sat May 26 12:04:26 2007 > New Revision: 924 > > Log: > data/driver.list: added SVEN Power Smart RM 2000 to the list. > > Modified: > trunk/ChangeLog > trunk/data/driver.list > > Modified: trunk/ChangeLog >

On 22-3-2017 14:37, Charles Lepple wrote: > On Mar 22, 2017, at 9:29 AM, Marc Kessels <marc at kessels.name> wrote: >> Hi Charles, >> >> >> Upsmart version is 1.5, copyright says 2012-2014 > Do you have a direct link? I found UPSmart-DryContact-V3-4.zip and UPSmart-Networking-V2-4.zip via web search, but the dates for the Linux components are ~ 2002. my version

Hi Charles, Upsmart version is 1.5, copyright says 2012-2014 the github issue seems a bit worse, since it reports: received 10 (85) 1.158700 read: UPS No Ack whereas my system reports : 6.239688 Full update... 6.239776 send: Q1 6.261270 received 47 (40) 6.261371 read: (234.0 000.0 234.0 012 49.9 27.4 29.0 00001000 but it keeps repeating the last line,

Hi, FYI for all whom have the Sweex manageable UPS. I got my sweex manageable UPS500VA working with NetworkUPSTools using the ippon driver. Here is my the ups.conf file: [ups] driver = ippon port = /dev/cuad0 desc = "Server" Has anyone tried the ippon driver with Sweex 600VA, 700VA, and 800VA models? Regards, Jan

On Sep 6, 2019, at 3:43 PM, Martyn Hill wrote: > > Just thought to share my findings getting a Sweex PP200 650VA UPS working with NUT (I didn't see this particular model listed on the HCL.) Thanks! One of the other Sweex models shows a few instant commands: https://networkupstools.org/ddl/Sweex/INTELLIGENT_UPS_1500VA_P220.html Is anything listed when you run `upscmd -l ups`?

First off, my apologies for bringing back this thread from the dead (September 2005, http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-September/000150.html), however my problem seems relevant enough that I wondered what happened to this thread as it seems to have died after the message I quote below. Despite the fact that I am having trouble getting my Sweex 1000VA UPS (USB) to work, and

First off, my apologies for bringing back this thread from the dead (September 2005, http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-September/000150.html), however my problem seems relevant enough that I wondered what happened to this thread as it seems to have died after the message I quote below. Despite the fact that I am having trouble getting my Sweex 1000VA UPS (USB) to work, and

Hello, I have a UPS unit with a USB Interface that appears to work with the blazer_usb and nutdrv_qx drivers. I have tried all combinations of subdriver and protocol and the result is always the same. The values returned are all zero's. The issue seems to be the same as https://github.com/networkupstools/nut/issues/307 Attempts to send a command to silence the beeper or trigger a battery

Hello, I'm trying to get an energenie EG-UPS-033 (http://energenie.com/item.aspx?id=8087) to work with nut. It standard comes with linux software (UPSmart), which shows the input/output voltage, load level, input frequency. and battery and case temperature. The values change about every second. The selected monitor mode in this tool is Mega(USB). The bad thing of this tool that it

Hi all, i've read a thread about this UPS from Peter van Valderen. He tried to develop a driver for this specific type of UPS. I've downloaded nut-2.2.2 and tried to apply the patches (lakeview.patch & lakeview.v2.patch) but both resulted in rejected chunks. I've tried to ./configure with type lakeview and then a make, but the make command fails. Does anybody has any

Hello again, I have a Sola 305 (aka Powerware 3110) here connected via a serial INT-0051 cable which I am trying to get working with nut. The driver.list file indicates that nut supports the Sola 305 when connected via the INT-0025C cable using the genericups driver with upstype set to 7 but it does not mention the INT-0051. I was able to use the "Basic CheckUPS II" utility provided

Arjan, I am forwarding your email to the nut-upsuser mailing list. I am not an expert on the Powermust driver; hopefully somebody on the mailing list will be able to help you! -- Peter Arjan DJ wrote: > > Dear Peter, > Some days ago I bought a Sweex UPS (500VA) and now I have set up NUT (using > the Powermust driver) and everything is working fine. Invoking upsmon -c fsd > gives