similar to: "Master privileges unavailable" &

Hello all NUT users and developers! Have some questions about nut suite: 1. Does upscmd provide only device-specific commands? Or commands like shutdown.stayoff are general and good for all ups models? When i see output of 'upscmd -l' - is this general commands that supported by given device or this is unique commands of this device? For example, i have APC SmartUPS-750 and it shows me

Hi, I'm using debian sarge on my server and connected a MGE-ups ellipse via the serial port. I searched the internet for the answer, but can't find it. My config files: <upsd.users> [admin] password = pwd allowfrom = 127.0.0.1/32 actions = set instcmds = all [upsmon] password = pwd allowfrom = 127.0.0.1/32 10.0.0.224/32 upsmon master [upsslave] password

Hello all, I'm having problems with what I'm told should be a straightforward issue. The message in /var/log/daemon is: <quote> Feb 13 10:37:57 lupin upsmon[31324]: Master privileges unavailable on UPS [lupin1500AVR@localhost]

Hi all, I've just upgraded my debian box from etch to lenny, and am now having Nut problems. I have read through the UPGRADING text (which helped fixed my first ups driver related problem), but have now hit another problem, which seems quite common, but non of the responses I've found on Google apply, so I'm coming to you for help. On issuing a "/etc/init.d/nut start"

2009/5/3 Thomas Juerges > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi Arnaud, > Hi Thomas, > I just checked the 2.4.1 version of nut and found that you forgot to add > my old UPS model (APC Smart-UPS 900). I guess it is because you were > busy at the time when I sent you the patch. So here it goes again. :) > uh, right sorry. I was pretty sure I applied

G'day y'all, Here's a tiny patch set for drivers/apcsmart.c and drivers/apcsmart.h. Adds APC SmartUPS 1250 ("8QD" case) + 940-0024C recognition to apcsmart. (Unpatched apcsmart.c v1.99.8 misidentifies the SmartUPS 1250 as a "dumb" UPS.) For NUT 2.0.5+. NUT 2.0.5: Patches apply successfully. Builds successfully. Works as expected under Ubuntu 7.04. NUT 2.2:

Hello! After I type "upsmon", in syslog the following message appears: Aug 16 14:11:09 marto upsmon[7731]: Master privileges unavailable on UPS [Inform@localhost] Aug 16 14:11:09 marto upsmon[7731]: Reason: Access denied Can you tell me where my error is, my configuration files are: ups.conf: [Inform] driver = powercom port = /dev/ttyS0 desc = "inform guard" linevoltage = 220

Greetings, I imagine this question must have been answered previously on the list, but I can't search for the answer because the archives are gone. Executive summary: I am trying to install and configure nut 2.0.1 on Fedora Core. I have a SmartUPS Pro plugged into a USB port. Upsmon is logging "UPS myups@localhost is unavailable" to syslog and via wall when it starts up and

Ok, so another apc UPS 3000 complained about bad batteries, and I changed them out from the same order that I'd gotten in a couple of months ago. The APC SmartUPS 3000 started connecting and disconnecting the USB connection. I brought down and up the service, no joy. Finally, after googling, I found a *completely* undocumented way to start apcupsd, that a few years ago someone was told to

Hi Ted there was a drift from the initial topic. worth a new thread! 2014-07-27 9:13 GMT+02:00 Ted Mittelstaedt <tedm at mittelstaedt.us>: > On 7/26/2014 12:18 PM, Arnaud Quette wrote: > >> Hi Eric, >> >> sorry for the lag, summer time... >> >> I'm first seconding Charles comments >> >> 2014-07-09 12:31 GMT+02:00 Eric S. Raymond <esr

Hej! Hope nut-upsuser is an appropriate place to post additional info about the smartups protocol, please tell me if not. I got an APC Smartups 2200 (5U Rack Mount, European/230V version, 48V batteries) a couple of days ago, was very happy to find the protocol description at http://www.networkupstools.org/protocols/apcsmart.html, and started to play. At the point when everything was working

We recently had to replace an old APC SmartUPS 3000 with a newer 3000VA (the 2U one). It has both serial and USB in the back (with an RJ-45 on the end of the serial cable). I can't get the apcsmart driver to connect. I figured it should work the exact same as the old UPS, with /dev/ttyS0 as the port (I'm using the same port on the server that the last one was plugged into). I even

Charles, maybe we are getting closer :-) > The tripplite_serial_protocol branch has some debug statements that will show up if you run "sudo drivers/tripplite -D -a name-of-ups" from the nut directory. Network UPS Tools - Tripp-Lite SmartUPS driver 0.91 (2.7.4-432-gafd90f5a) ?? 0.000000??? [D1] debug level is '1' ?? 0.177766??? [D1] W value = 0x86 ?? 0.177782??? [D1] L

I've having trouble understanding the NUT compatibility page. Is it compatible with the OMNISMART300? Or the OMNI900LCD? The compatibility page said for instance SMART550 -- tripplite_usb SmartUPS -- tripplite OMNI650LCD -- usbhid_ups so I'm not sure if an OMNISMART300 is like a Smart, or a SMART, or an OMNI, or even if it's supported at all. Thanks in advance for any help!

Hello! I've ran into this annoying issue when setting up a new server. I have an APC SmartUPS hooked up on a USB-serial converter on /dev/ttyUSB0. This works nicely, until: hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 usb 3-1: pl2303 converter now attached to ttyUSB1 apcsmart gets into an infinite loop of this:

Hello all, I was asked about a proper way to ensure powerfail shutdown of a blade server fed off an APC SmartUPS, which is monitored by all hosts over SNMP. In particular, they'd like to avoid the "untimely" return of utility power - when the OSes are already shutting down, and would stay down because the UPS is well-fed now and thus won't power off and later power on to boot

Hi I have a Dell PowerEdge T310 *tower* server.. I have to buy an ups by apc... anyone could help me giving an hint ? a simple "smart ups 1000" could be enough ? thx so much!! lewis.

We are configuring a server with a Tripplite SmartUPS, Web SNMP Card, and Envirosense Probe. The configuration is good using usbhid driver and we can get it to shutdown clean by producing a "power event" (pull the power cable). It is not very clear how to add or see the values associated with the external probe. We need to be able to shutdown based on the input from the probe as well as

Hello everybody, I got tree UPS devices connected to a Debian server, and i am searching for a way to configure them. The server power-cord is only connected to one of the ups devices, and should monitor the other ups systems to sent email status. I got a HP R3000XR UPS with has a RS232 communication port that I have working perfectly. Then I have two APC SmartUPS 750V devices that are

Well, after our first real extended power outage, I found out that even though the UPS 1000 RM is recognized okay, it does not work properly. It never seems to see any change in UPS status. It looks very similar to the other issue I reported with the APC CyberFort 350. I never was able to get to the bottom of the CyberFort issue, but I'll bet it's the same issue as we have with the