similar to: Fwd: NUT on FreeBSD

On 2/12/07, Herman J van der Merwe <herman@mercygate.com> wrote: > OK, I have NUT up and running, but I want other FreeBSD hosts (machines) to > monitor the UPS as well and when the UPS sends a shutdown, they must > shutdown as well. > > According to the INSTALL.txt file, I ,ust add an ACL entry for every host. > > The format NUT uses is one of ACL <myhost>

Arnaud Quette wrote: > Anyhow, I would more see this as a merge of all these drivers, with > some autodetection or flag/param to switch the mfr/model and maybe > capabilities... Whatever the driver name is, a good thing would be the > name of the protocol or something generic enough, though powermust is > fine. Ok, I made some minor changes to powermust, to make it less

Hi! I don't know how I missed it before, but "bestups" seems to implement mostly the same protocol as megatec. Is anybody out there using this driver willing to try "megatec" to see if it works? AFAIK, the only difference seems to be the command that gets the UPS identification data ("I" on "megatec", "ID" on "bestups"), but

Hi! I don't know how I missed it before, but "bestups" seems to implement mostly the same protocol as megatec. Is anybody out there using this driver willing to try "megatec" to see if it works? AFAIK, the only difference seems to be the command that gets the UPS identification data ("I" on "megatec", "ID" on "bestups"), but

Alexander Gordeev wrote: > Author: agordeev-guest > Date: Mon Aug 13 13:09:43 2007 > New Revision: 1049 > > Log: > drivers/megatec_usb.c: added credits to the banner message. Is this really needed/desirable? I think this kind of information needs to be put in the AUTHORS document. There are many more people on this list that put a lot of effort in NUT, without claiming credit

Hi! We have two MGE Evolution 1100 here, and I want to make use of the powershare outlets to force a particular boot sequence on the machines powered by them. However I'm not sure how to set those variables upon NUT starting, without having to change the init scripts to call "upsrw". Is there some place where I can set them, where they can be read automatically on startup? One of

Hi, Sorry for the forwarding. I sent this with the wrong "from" address and got rejected by the list. ---------- Forwarded message ---------- From: Carlos Rodrigues <cefrodrigues at mail.telepac.pt> Date: Jun 18, 2007 9:34 PM Subject: Re: Megatec - modem control lines [impact to megatec_usb] To: Arjen de Korte <nut+devel at de-korte.org> Cc: ups-dev-list <nut-upsdev at

Hi guys, Please bare with me, as this is my first attempt at setting up a UPS under Linux. I've been trying to setup a UPS on one of my clients servers. The model of the UPS is a Square one QP1000/QP1010 1Kva I've looked on the following link http://eu1.networkupstools.org/compat/stable.html It says that it should be compatible with the "powermust" driver, then in my

On Nov 27, 2007 7:51 AM, Tom?? Smetana <tsmetana at redhat.com> wrote: > As for the removal of nut from RHEL: I don't know anything else about > the decision than you do. Red Hat has historically provided ancient NUT versions with their distributions (not Fedora though). I guess they decided that it was better to ship nothing at all. I have no idea why they did it, but if I had

While trying to compile newhidups, I get this error... carlos@rhea:~/dev/nut/svn/trunk$ make usb make[1]: Entering directory `/home/carlos/dev/nut/svn/trunk/drivers' gcc -I../include -O -Wall -Wsign-compare -c newhidups.c In file included from newhidups.c:25: libhid.h:46: error: syntax error before "u_int16_t" libhid.h:46: warning: useless keyword or type name in empty declaration

Hi, Currently, "configure.in" in both testing and the trunk have libupsclient disabled by default, which means the build is broken if the user doesn't explicitly enable it when running configure. Why was it like this and can I commit the fix? -- Carlos Rodrigues

Hi, Is there any way to debug a failure of NUT to shut a machine down AFTER the even occurs? (Be it a config issue {Though the standard "It hasn't changed since install" applies}, or a UPS failure, or a program failure). Its showing up (after reboot) as : valhalla# upsc robanton at localhost driver.name: genericups driver.parameter.pollinterval: 2 driver.parameter.port:

Hi! Is there any way to do just plain vanilla TBF (Token Buck Filter) type shaping on a group of ips/networks, not an entire interface. Currently the only way I know how to shape in Linux is to use HTB or CBQ, but both of these need a total rate and then you need to subdivide that into classes. That is not what I want. All I want is Cisco generic traffic shaping style shaping (or similar to how

Disclaimer: I've setup APC UPS monitoring and it works... ... but when it comes to mustek powermust 600usb (connected via com-port), I can't make it work. Got NUT installed via aptitude in ubuntu feisty and a basic setup, exactly the same as for the apc, except for the name of the ups and the corresponding section of ups.conf -- [mustek] driver = megatec port = /dev/ttyS1

I have an MGE Pulsar Evolution 1100 connected to a Debian box, with nut-2.0.1 (the standard "sarge" packages). I have it connected through USB, and I'm using newhidups. However, about once a day the driver looses contact with the UPS and I have to restart NUT to get it to drop the "data stale" nonsense (it happens more often than this, but most times it recovers without

Greetings! Thanks to all the developers who have made this project so far. Searching for a Linux based Belkin UPS monitor led me straight to the Network UPS Tools. I have bought a Belkin F6C900-UNV (900VA) for use on a Slackware 10.2 server to replace an older APC model that died suddenly. So far I have successfully managed to get NUT 2.0.5 compiled and configured and found that this Belkin

Dear list I need to see the code behind a function. I used to be able to see the code behind a function by typing e.g. mean(). Now I get the error message: Error in mean.default() : argument "x" is missing, with no default. Please advise. Regards Lize van der Merwe -- This e-mail and its contents are subject to the South African Medical Research Council e-mail legal

I would like to be able to see what options an ogg was made with, so it is quick/fast to recognise which are -q, which are -b, etc. I see there is already Max/Min/Nominal rates mentioned by ogginfo - and if the actual rate is relatively far off from the nominal rate, then it is likely -q, but this isn't reliable enough, and with just more options coming soon... As a matter of fact, I'd

Is it possible to make a complete image (or clone) of your hard drive (FAT or NTFS) using rsync? Is it possible to make incremental backups of the image (without having to duplicate the source files)? When restored to a new hard drive it should be bootable again and should be an exact copy or clone of the original hard drive(i.e. the program should firstly copy the system file information

I had some free time this weekend, and made some long overdue changes to "megatec". The thing is, these changes lead to a couple of questions that I must ask before I go on and "svn commit" them: 1) The blazer, fentonups, esupssmart, ippon, sms and mustek drivers are now completely covered and all of their functionality should now be present in megatec, and also every model