similar to: Belkin F6C1500-TW-RK won't stay powered off

is there a way to override the productid (like -x productid=1234) when using newhidups? just thought i'd try it with the F6C1500-TW-RK over usb. i was able to get hidups to work using the below settings, but it provides limited information. my ups.conf entry: [belkin] driver = hidups port = /dev/usb/hiddev0 and the output of upsc: gateway:/etc/nut# upsc

For the record, I was able to get the following working: Device: Belkin F6C1500-TW-RK Driver: belkin I tried the "belkinunv", which I use for my F6C1100-UNV, but it didn't work. At least there was a driver that worked! :-) Feel free to add it to the list of "tested" configs. Thanks, Dave ---------------------------------------------------------- Are Your Friends

Hi, just wanted to let you know that I have two belkin F6C-1250-TW-RK UPSes which work just fine with nut. I made this small patch so that nut recognizes the usb device id. Thanks, ~David -------------- next part -------------- A non-text attachment was scrubbed... Name: nut-2.4.1-belkin-1250.patch Type: text/x-patch Size: 1205 bytes Desc: not available URL:

O.S. Ubuntu 10.10, Maverick Meerkat 32 bit. NUT 2.4.3-1ubuntu5, package installed Belkin F6C1500-TW-RK I am having trouble starting uspd whenever I add a client from my lan to uspd.conf: LISTEN 127.0.0.1 3493 LISTEN 192.168.36.106 3493 naknight at nak-server:~$ sudo upsd -DDDD Network UPS Tools upsd 2.4.3 0.000000 listen_add: added 127.0.0.1:3493 0.000093 listen_add:

I am looking at one of these, see: http://www.cclonline.com/product-info.asp?product_id=14622&category_id=216&manufacturer_id=0&tid=f6c1250eitw-rk# I can't see it on the compatability list ... but that doesn't mean that it doesn't work: * it could work, but it isn't on the list * it could be listed under a different (perhaps US) part number Can any one please tell

Dear Ashley, I have no personal experience with the Tower-Rack series, but someone reported on the Nut-upsuser mailing list on 29 Nov 2005 that these models work with the "belkin" driver of the NUT software (http://www.networkupstools.org/). This is for the serial port. For USB, the NUT "newhidups" driver should work (or if it does not, we can fix it). The software that

Hi, I have several Belkin UPSes here that I'm trying to connect through USB. I just downloaded 2.2.0, but unfortunately I'm getting error messages. All testing was done as root. The driver says (full output is attached): ---SNIP--- eta nut # ./usbhid-ups -x productid=0750 -DDD -a belkin <...cut...> Checking device (050D/0750) (003/007) - VendorID: 050d - ProductID: 0750 -

Greetings all; Back to a thread I started back in May of 2008 I think. I never did get this belkin and nut to talking, so I thought I'd make another run at it. Trying to run the driver as the user gene, I'm getting this: --------------------------- [root at coyote ups]# su gene -c "/sbin/belkin -D -a myups" Network UPS Tools - Belkin Smart protocol driver 0.21 (2.2.2) debug

Greetings; Its unk because whats plugged in seems to be blocking the rear name plate. About all I can recall is that its big, 3 battery unit, rated somewhere north ob 1250 VA. Its an 050D:0751 Belkin. What driver should I use, and what file is that set in? The nut version presently and freshly installed is from the Ubuntu 10.04.4 LTS repo's. Probably old, but IIRC it also worked with

Greetings; I have the newest nut (nut-2.2.2-4.fc10.i386) from fedora 10 repos) installed and this ups (from lsusb -vv): Bus 001 Device 006: ID 050d:0751 Belkin Components Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

I'm setting up a cluster with multiple ups's using nut 2.2. The ups's are Belkin 1500 (ID 050d:0751) which don't appear to report a serial number. Is there any other way I can setup ups.conf with multiple of these ups over usb on Linux? If I just setup the vendor and product id's, every definition in ups.conf appears to match the first one, and therefore all of them but

I'm sure I'm missing something, but I can't seem to get NUT working on FreeBSD. bryce at tahiti[/usr/local/etc/nut]>cat ups.conf [belkin] driver = usbhid-ups port = auto vendorid = 050d #productid = 0751 bryce at tahiti[/usr/local/etc/nut]>s /usr/local/libexec/nut/usbhid-ups -DDDDD -a belkin Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31

On Oct 12, 2014, at 8:28 PM, Gene Heskett <gheskett at wdtv.com> wrote: > Its unk because whats plugged in seems to be blocking the rear name plate. > About all I can recall is that its big, 3 battery unit, rated somewhere > north ob 1250 VA. > > Its an 050D:0751 Belkin. > > What driver should I use, and what file is that set in? Looks like it is in usbhid-ups. If

On Tuesday 14 October 2014 08:19:02 Charles Lepple did opine And Gene did reply: > usbhid-ups Added that, but only get this at "sudo service nut start" gene at coyote:/etc/init.d$ sudo service nut start * Starting Network UPS Tools [ OK ]

Bus 003 Device 002: ID 050d:1100 Belkin Components # /lib/nut/usbhid-ups -a belkin Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) No matching HID UPS found Hmm best to stick with 2.0.4. Justin.

Bus 003 Device 002: ID 050d:1100 Belkin Components # /lib/nut/usbhid-ups -a belkin Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) No matching HID UPS found Hmm best to stick with 2.0.4. Justin.

Have had no issue until I ran apt-get dist-upgrade this morning: # /lib/nut/newhidups -u nut -DDDDDD auto Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) debug level is '6' Checking device (0000/0000) (001/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device does not

Mr. Selinger, I'm CCing you directly since it appears (insofar as I can tell) that you are one of the delelopers for the newhidups driver. This is the third time I've submitted this (hence the CC this time). Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping that was the problem. My sincere apologies if this has gone through and I just haven't seen it

Hi Arjen My apologies fro drifting off topic in the other mailing list...:-) On the bottom of the Belkin UPS unit - is the model number: F6C120auUNV The "au" is for Australia I think. "man belkinunv" states that F6C120-UNV is supported - and I assumed that the "au" would not prevent this. I plugged in the USB to gather the information you requested. My intention

I have a new Belkin F6C900-UNV. I see that it's not listed in belkin-hid.c The VendorID is 0x050d like all the Belkin UPSes, and the ProductID is 0x0900. I haven't had a chance to actually test the development version of nut yet, since I'm running Fedora Core 6, which still has nut 2.0.3. `newhidups -DD -a myups` gives the error of: Checking device (050D/0900) (001/002) - VendorID: