similar to: TrippLite OMNIVS1500XL Segmentation Fault

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root

Good afternoon, I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL using NUT. I checked the compatibility list and saw that this UPS is supported by tripplite_usb. The system is running Debian Stable, but I've downloaded NUT 2.0.3 and compiled from source since the packaged 2.0.1 doesn't include tripplite_usb. I compiled --with-user=nut. My first attempt at

So a month or more ago, I posted about continual disconnect messages from this UPS (roughly 2/hour), using nut 2.2.0 on debian etch. Now, I've finally gotten around to running tripplite_usb in debug mode, and these are the results: ... send_cmd(msg_len=2, type='L') send_cmd(msg_len=2, type='S') send_cmd(msg_len=2, type='B') send_cmd(msg_len=2, type='L')

The Compatibility page lists the OMNIVS1000 as supported, but the tripplite_usb driver doesn't seem to recognize my UPS. Below is the debug dump from attempting to load the driver. I am using the nut package from Debian: 2.2.1-2.1 and I was wondering if this was a known issue? maroon:/lib/nut# /lib/nut/tripplite_usb -DDDDD -a usbups Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver

Hi I have a Tripp lite smartusb550 using fedora 3 (2.6.12-1.1381_FC3smp). Managed to establish communication with the ups using the tripplite_usb driver but get the following errors Any help to make it work will be appreciated cheers Julio -----------------------------------------------------------------------------------------------------------------------------------------------------

Hello all; I am new to this list. Recently we have been getting these cheap new Tripp-Lite "LCD" style UPS'es around here, and I was surprised to find the lack of Linux support. The model name is OMNI650LCD. Anyway, I tried the tripplite_usb driver and got a message instructing me to contact this mailing list. I might try to fix the problem myself, if I was more familiar with the

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM

Hello, I have a TrippLite SMART1500RMXL2U that I'm trying to get running with Nut 2.2.1. Running upsdrvctl start works, upsd works, but upsc has "issues": je-nas:~/src/nut-2.2.1# upsdrvctl start Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not

Good afternoon, I am trying to communicate with a new Tripp-Lite UPS via usb and having little luck. After more than a week on this I've decided to ask for help. I am very inexperienced at posting information to message boards, so hopefully I'm doing this right. I assume this is the correct place to post this message. I will start with the equipment I have. I am using Debian Sarge

I'm having problems creating a UPS connection to my Tripp Lite UPS System: Ubuntu 8.04.2 Nut 2.4.1 freshly compiled from source. When I do upsdrvctl start everything appears to work and I get :Detected a UPS: TRIPP LITE/TRIPP LITE UPS Using OMNIVS 2001 protocol (2001) Unit ID not retrieved (not available on all models) Attached to Tripp Lite UPS But

Hi, I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to work on my system. What I have is: Ubuntu 10.04 Server Nut 2.4.3 /etc/nut/ups.conf [omni] Driver = tripplite_usb Port = auto Desc = "My Server" /etc/nut/nut.conf MODE=standalone Iget the following error when using the > sudo upsdrvctl start Network

Hi, I am new to this list, so I apologize if I make any mistakes in posting. I am trying to set up nut with my Tripp Lite SMART 1200LCD. I looked on the compatability page, and some Tripp Lite models were supported, so I decided to try out mine. I have tried both USB and serial connections, and neither have worked. I am just wondering if this is a problem with nut supporting my model, or

Hi, I'm running the latest version of NUT and with the above UPS and I keep getting the following error: "tripplite_usb[3308]: Error reading B value: Device detached? (error 0: could not claim interface 0: Device or resource busy)" The device keeps disconnecting and re-connecting until fails. I've tried to see if others are getting this - but I could not locate a

Greetings to all, I recently connected a Tripp Lite SMX500RT1U unit to a Synology NAS (basically a Marvell ARM equipped box running a custom 2.6.24 Linux). I tried using the tripplite_usb driver contained in nut 2.4.1 with not much luck. It does read the model ID and VA rating properly, but fails at everything else - mains voltage (this is a 230VAC EU model), battery config, unit status etc.

Hello, We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some

<nut-upsuser at lists.alioth.debian.org> I am doing my best to avoid have to spend $280 for a network monitoring card to put into a $190 UPS just to have some good remote monitoring capabilities. Rather, I would like to monitor my many 1U Tripp Lite's on my network using a Raspberry Pi running Raspian and using NUT. However, I cannot seem to get it working. And I while the hardware

Hello All, This is my first post to the list & I have tried to do as much searching and debugging on my own as I can bear. Please HELP! I am currently using up to date Centos 5.2 32-bit - kernel version: 2.6.18-92.1.10.el5PAE #1 SMP. I am using a Tripplite OMNIVS1500 via usb connection. I am using the tripplite_usb driver. I have tried to user versions 2.2.0 from an rpm, 2.2.2 & and the

Hello All, This is my first post to the list & I have tried to do as much searching and debugging on my own as I can bear. Please HELP! I am currently using up to date Centos 5.2 32-bit - kernel version: 2.6.18-92.1.10.el5PAE #1 SMP. I am using a Tripplite OMNIVS1500 via usb connection. I am using the tripplite_usb driver. I have tried to user versions 2.2.0 from an rpm, 2.2.2 & and the

I have a Tripp Lite OMNI900LCD. It has a usb connector and claims to be USB/HID. I haven't been able to get it to work with newusbhid or tripplite_usb. Here's lsusb -v output: Bus 001 Device 013: ID 09ae:2005 Tripp Lite Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level)

As I understand it from looking through the archives of this mailing list and the source for the driver, tripplite_usb should work for this device. I tried to go through the source as best I could to see if I could add support myself, but got a bit lost. Anyhow, here's hoping that someone has some experience with this model. My system is using the latest CVS checkout of the Development branch