similar to: Plexus UPS 1000V - megatec_usb

Hey all, thanks for your work on nut. I recently got myself a new cheap UPS, and have thus far determined very little about it. I can run whatever you like to help identify and work with it. So far I've played around with various settings and have had some limited success with the megatec_usb driver (Debian testing version): ----ups.conf---- [plexus] driver=megatec_usb model=500VA mfr=Plexus

Hi, i just got a Phoenix Technologies PH1200UPSB 1200va serial-port ups and it is only partially supported by bestups driver (needs manual ID or driver rewriting). It comes with a tool called UPSilon 2.1 on a CD (which worked better with TERM=linux). After [sl]tracing it i came to these results: COMMANDS : - Command: I Response: "#XPHOENIX TECH PH1200UPS VER2.00C " - Command: F

Hi All, I am a newcomer to Nut, so firstly hello :-) I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was

Hi All, I am a newcomer to Nut, so firstly hello :-) I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was

Hi, Has anyone managed to get a Plexus UPS talking to their NAS. I've followed the excellent instructions here http://forum.qnap.com/viewtopic.php?f=182 <http://forum.qnap.com/viewtopic.php?f=182&t=35970&start=0> &t=35970&start=0 but I'm not there yet. When I manually start upsdrvctl without the UPS plugged in I get [~] # /usr/bin/upsdrvctl start Network UPS

Hi Arnaud and NUT team You may recall some time ago, I and a few others posted questions about the above referenced (cheap and cheerful) USB-based UPS - specifically regarding FreeBSD USB support in NUT. The original posting was entitled "Zigor Ebro 650 compatibility". I've since tried the latest Windows port of NUT with my WinXP laptop connected to the Zigor Ebro and finally

CentOS Errata and Security Advisory 2018:1836 Important Upstream details at : https://access.redhat.com/errata/RHSA-2018:1836 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 9c26560f7b175d6e1455a7b9edf9c56be74c06a98f91074a36c3944a51ea110e plexus-archiver-2.4.2-5.el7_5.noarch.rpm

Hi I Bought a cheap Plexus 800VA UPS from ebuyer : http://www.ebuyer.com/product/240319 to use with my Netgear ReadyNAS duo. Initial version of NUT was very old and NAS didn't detect it although in the NAS log it said "UPS Disconnected". Syslog did send the following : Jan 25 12:46:36 nas-27lfc kernel: usb 1-1: new low speed USB device using uhci_hcd and address 2 Jan 25 12:46:37

Hi all, First off thanks you for such a great tool - my searching so far indicates that the developers and community behind nut are committed and doing a great job! Background: I've just purchased a Plexus 500VA UPS for ebuyer because it was cheap. I didnt expect much but I've seen a few references to people getting the same and similar models to work with NUT so was encouraged to try!

Greetings Gentlemen, I have Mustek NetGuard 1000 UPS which is equivalent to Ippon SmartWinner 1000. I have tried to run several latest builds of NUT, but run megatec_usb driver still failed with my device. I hope the information below might help. Regards, Oleg Here is the information which may help: lsusb -v Bus 002 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor:

Hi, I have a puppetmaster - agent architecture. I have a module for the vsftpd configuracion in the agents. The configuration of the value ''max_per_ip'' in the agents may vary. This is a line of the manifest: $max_per_ip = hiera(''max_per_ip'',10) I want to specify different values for each agent using hiera. The problem is I am only able to specify the

Send CentOS-announce mailing list submissions to centos-announce at centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request at centos.org You can reach the person managing the list at centos-announce-owner at centos.org When

Hello, I have just installed nut_2.6.0 from Debian testing, do anyone know the correct driver for this ups? The blazer_usb don't report battery-charge, the bundled software report charge and runtime. root at pluto<~>upsc powerwalker battery.voltage: 40.86 battery.voltage.nominal: 36.0 beeper.status: enabled device.mfr: device.model: HV 1K device.type: ups driver.name: blazer_usb

Hi, I am trying to backup data from a distributed replicated volume. The volume was built from 6 units of 2 TB hard disks: gluster> volume info Volume Name: 6TB-Vol Type: Distributed-Replicate Status: Started Number of Bricks: 3 x 2 = 6 Transport-type: tcp Bricks: Brick1: c107:/exp0 Brick2: c108:/exp0 Brick3: c109:/exp0 Brick4: c110:/exp0 Brick5: c111:/exp0 Brick6: c112:/exp0 Options

Hello. I have this UPS: Krauler UP-D1200VA Megatec USB protocol Vendor ID: 0x0001, Device ID: 0x0000 #KRAULER UP-D1200VA VER6.00 #220.0 004 23.50 50.0 Currently I have nut 2.2.0 installed from sources. Installation was successful except that I had to change a string in 52-nut-usbups.rules from: SUBSYSTEM!="usb_device", GOTO="nut-usbups_rules_end" to:

Hi, i've got similar problem with an OVISLINK 1000VA UPS on Debian. I've tried to connect with it using different drivers and this is what I get with each of them: [UPS] driver = blazer_usb vendorid = 0001 productid = 0000 port = auto subdriver = phoenix sweethome:~# /lib/nut/blazer_usb -a UPS -u root -DDD Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

after I starting battery test on my laptop I see in my logs some error and ups (IPPON Smart Power Pro 1400. usb interface) isn't monitoring now [ippon] driver = megatec_usb port = auto desc = "local" Feb 16 23:22:09 f37 upsd[17150]: Instant command: stlk at 127.0.0.1 did test.battery.start on ippon Feb 16 23:22:12 f37 megatec_usb[17249]: ser_get_line: Device detached? (error

ut 2.4.1 works with megatec_usb driver. It tries to interact with a device in /dev/bus/usb/X/Y, but there are root:root 664 access rights. When I try to set port /dev/hiddev0 with write access in config file, in strace there are no records about accessing /dev/hiddev, but still only /dev/bus/usb/X/Y How to explain such a behavior? execve("./megatec_usb",

Hello again! Thanks to the precious help from Henning Brauer, I managed to solve an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB). Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the kernel, adding a USB_quirk, this is what I get when I insert the USB cable: ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 So far, so