similar to: Powerware UPS 3110 USB

Hello, I am attempting to monitor my two Powerware 3110 UPS from Gentoo Linux using nut-2.2.0, kernel-2.6.22.1 via USB. From what I can gather around the net (circa 2005) things with USB on this UPS just didn't work. Has this changed and is there anything I can do to help? My ups.conf contains the following... [ups-router] driver = usbhid-ups port = auto desc =

With latest compiz from git and latest stable version I have an issue with rxvt-unicode (urxvt). Every window seems to get screwed up, I can't touch the window title at all, I have to use the move key-bind to move the window around. The title bar also is half white half blue, Has anyone else encountered this issue. It is not present in Metacity or Openbox. But it is in beryl. Here is a

Someone might want to add this to the docs - cable list and compatibility list - took me way to long to find. I was trying to find information on my UPS and came up with the following names for the same UPS series. Powerware 5119 Exide name was NetUPS SE Deltec name was PowerRite Pro II (1000VA-3000VA) What I have: The Exide NETUPS SE model PRC2400a p/n 05144038-3904 OUTPUT 2400VA 1600 WATTS

Is there support for powerware 3110 yet?

Help please on Powerware 3105 serial (aka SOLA 305 here in Australia). Is it best configured as a contact-closure device or do I try and persist to get bcmxcp to work - which it won't so far? Running on SUSE 10.1 Thanks,

Hi there. At the moment I'm trying to get my HP T1500 XR (Powerware 5125) UPS to work with NUT. NUT registers that the UPS is on battery/online, but I just cant get the program to shut down the computer I'm using the original cable (thus I didn't enter anything in the ups.conf file) If I remove the cable and run the daemon/program the computer will shutdown after x minutes defined in

I tried switching to the USB version of bcmxcp_usb and get this error when I try starting up upsdrvctl or bcmxcp_usb like so: /etc/nut/bcmxcp_usb -DDDD -a powerware -u nut I used this for ups.conf: [powerware] driver = bcmxcp_usb port = auto With the serial/usb dongle, I used this successfully: [powerware] driver = bcmxcp port = /dev/ttyUSB0 What devices does

Hi, is there a way to use my Belkin F6H650 on the USB port? I already installed usbhid-support, but neither the hidups worked (reports "/dev/usb/hiddev0 is not a UPS") nor genericups with upstype=7 and the hiddev set as device ("ioctl TIOCMSET: Invalid argument") worked. I have installed the debian sarge package of nut 2.0.1 (2.0.1-4) Regards, Philipp

Hello, does NUT support Powerware Prestige EXT 1000VA / PowerWorks A30 models in smart mode? I don't see them mentioned in the compatibility list (only Powerware 3115 and 5119 are there, listed as supported only by the "genericups" driver). Is the protocol known to be compatible with any other, supported UPS types? Thanks, Marek

My UPS is an Exide NetUPS SE PRC1500i (1500 VA), also known as Powerware 5119, according to Karl Schmidt (http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-July/000026.html) also Deltec PowerRite Pro II, and according to http://www.usedups.de/compaq_ups.html also Compaq R3000h. I am not sure if the information in http://www.bps.hu/powerware/model_en.html is to be interpreted as that it was

My UPS is an Exide NetUPS SE PRC1500i (1500 VA), also known as Powerware 5119, according to Karl Schmidt (http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-July/000026.html) also Deltec PowerRite Pro II, and according to http://www.usedups.de/compaq_ups.html also Compaq R3000h. I am not sure if the information in http://www.bps.hu/powerware/model_en.html is to be interpreted as that it was

THE GOOD: NUT is able to communicate with my Powerware 5115A over USB using the bcmxcp_usb driver: ambient.temperature: 38 battery.charge: 99 battery.runtime: 9000 battery.voltage: 27.07 driver.name: bcmxcp_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.2.1 driver.version.internal: 0.13 input.frequency: 50.34 input.voltage: 235 output.current: 0.0

I've got a Powerware 5119 RM UPS. driver.list says to use "genericups upstype=20", however I know this UPS supports the UPS Code II protocol, so I wanted to use the upscode2 driver. It took some hacking but finally it works. I'm using NUT 2.4.1 and upscode2 driver version 0.87 (however the latest r2350 version of upscode2.c isn't significantly different, so I think all

I've got some strange problem with NUT on my 5115 on Debian Etch: ---snip--- $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Things to try: -

Hello, I have a Powerware 5125 UPS and I don't know which driver I should use. In the compatibility list for the stable branch I see 2 sections for this model: 5119, 5125 - genericups upstype=15 PW5125 - bcmxcp Why are there 2 and which should I use? Thank you.

Dear NUT developers, I am using NUT + bcmxcp + Powerware 9315. I would like to use NUT to shut down my systems if the air conditioning fails and the room get too hot. I want the same shutdown sequence as would be produced when the UPS goes on battery. The UPS has a terminal block at the front for up to six different 'building alarms'. I can connect a thermostat (35C) to the

Hi, Does anyone know how to make NUT works with Powerware 5125? I already tried serial communication (genericups and bcmxcp) and USB (usbhid-ups and bcmxcp_usb), but without success. I'm using the latest version of NUT (2.6.5) under Debian amd64. Can anyone help me? Thanks. Daniel -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone gotten the newhidups driver to work w/ the Powerware 9120 series? Here's what I get for debug info (It's the Phoenixtec device): $ sudo lsusb Bus 002 Device 002: ID 0846:1040 NetGear, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 06da:0002 Phoenixtec Power Co., Ltd Bus 001 Device 001: ID 0000:0000 $sudo /lib/nut/newhidups -DDDDD auto Network UPS Tools: New

Hi, just wanted to provide a upsc dump for an Eaton/Powerware 5115 rack mount unit. This was on a CentOS 7.3 machine with following packages installed: nut-client-2.7.2-3.el7.x86_64 nut-2.7.2-3.el7.x86_64 nut-cgi-2.7.2-3.el7.x86_64 $ upsc eaton5115 ambient.temperature: 43 ambient.temperature.high: 75 battery.charge: 100 battery.runtime: 24171 battery.voltage: 40.96 device.mfr: Eaton

Hello, I am trying to understand how to create a custom configuration for the genericups driver. My system simply signals RI on a serial port on low battery. That's it, nothing else. This serial port is also being used for communications so the other lines are going to be changing all the time, unrelated to the UPS state. Is there a "null" upstype I can use, and then add LB=RNG?