similar to: [LLVMdev] Motivation for 'select' instruction

On Thu, 22 Apr 2004, Vladimir Prus wrote: > > I'm wondering what was the original motivaton for the 'select' > instruction. Was it for convenience, or for some deep reason. I'm > asking because it's causing me some problems (see below) and I'd like to > know I understand the situation before working those problems around. The select instruction is

Chris Lattner wrote: > The select instruction is basically an SSA-form "conditional move", or a > very simple form of predication. Integer codes often have very complex > CFG's which are usually doing simple things. For example, it's not > uncommon to see something like this: > > if (blah) > X = 14; > > If the body of the if statement is simple

On Thu, 22 Apr 2004, Vladimir Prus wrote: > > > int %logsch(int %ih, int %nbh) { > > > entry: > > > %tmp.1 = setlt int %nbh, 0 > > > %ih_addr.1 = select bool %tmp.1, int 10, int %ih > > > %nbh_addr.1 = select bool %tmp.1, int 0, int %nbh > > > %tmp.4 = setgt int %nbh_addr.1, 22528

Hello, I am trying to construct two matrices, F and V, composed of partial derivatives and then find the eigenvalues of F*Inverse(V). I have the following equations in ryacas notation: > library(Ryacas) > FIh <- Expr("betah*Sh*Iv") > FIv <- Expr("betav*Sv*Ih") > VIh <- Expr("(muh + gamma)*Ih") > VIv <- Expr("muv*Iv") I

Hello, For the very first time, I tried the command bellow on a newly build Debian Buster box on which I successfully built Asterisk 17.2.0 before. I got : # contrib/scripts/install_prereq install-unpackaged *** Installing NBS (Network Broadcast Sound) *** A nbs-trunk/LICENSE A nbs-trunk/nbsclient.c A nbs-trunk/nbsd.c A nbs-trunk/nbs.h A nbs-trunk/nbscat.c A nbs-trunk/Makefile

.... Un código más optimizado para la aproximación Monte Carlo de la distribución de IH N=10000 # tamaño simulación Monte Carlo n=5 # numero de uniformes cdf.IH <-function(x,n,N) { z=replicate(N,sum(runif(n))) apply(outer(x,z,">="),1,mean) } x=seq(0,5,.1) y=cdf.IH(x,n=n,N=N) plot(x,y,type="l") Un saludo. Olivier ----- Mensaje original ----- De:

> > Hola, a todos! Estoy ajustando un modelo componentes de varianza utilizando el paquete lme4, quiero extraer luego los valores estimados de varianza de cada factor aleatorio de este objeto lmer y guardarlo en un vector. Existe la función VarCorr, Esto es lo que hago: Mi ejemplo: tengo 3 factores NDVIaño; Máx.IH; TV # Ajusto el modelos lmer(peligro100 ~ 1 + (1|NDVIaño) + (1|Máx.IH) +

According to vt-d specs, the addr in IOTLB invalidation descriptor should be 4K page aligned. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> diff -r 0455d8317631 xen/drivers/passthrough/vtd/qinval.c --- a/xen/drivers/passthrough/vtd/qinval.c Thu Jun 28 18:43:28 2012 +0100 +++ b/xen/drivers/passthrough/vtd/qinval.c Wed Jul 11 08:43:24 2012 +0800 @@ -140,7 +140,7 @@ static int

Hi , R is a new language for me so sorry in advance if this error is to basic for posting. I have tried the R manual and search online for quite a few, if anyone could help i would be very thankful. Here is my code. kappa = 1.1 theta = 0.1 sigma = 0.4 rho = -0.6 v0 = 0.2 r = 0.05 T = 0.5 s0 = 1 K = 0.5 type = 1 Hestoncall = function(kappa,theta,sigma,rho,v0,r,T,s0,K,type) { u = 0.5 b

Hi list. I''m writing a program that stores a lot of Floats into MySQL database. Simplified version of the program use the following form of class. class Val < ActiveRecord::BASE end And Vals table contains one column: num double One of my data contains -Infinity for num and when I try to Val.new Val.num = <- Here goes -Inifinity Val.save! Then the program crashes:

We've upgraded to llvm 2.4 and we're hitting an assert in SCEV: llvm/include/llvm/Analysis/ScalarEvolutionExpressions.h:669: RetVal llvm::SCEVVisitor<SC, RetVal>::visitCouldNotCompute(llvm::SCEVCouldNotCompute*) [with SC = llvm::SCEVExpander, RetVal = llvm::Value*]: Assertion `0 && "Invalid use of SCEVCouldNotCompute!"' failed. This happens in

David Greene wrote: > We've upgraded to llvm 2.4 and we're hitting an assert in SCEV: > > llvm/include/llvm/Analysis/ScalarEvolutionExpressions.h:669: RetVal > llvm::SCEVVisitor<SC, > RetVal>::visitCouldNotCompute(llvm::SCEVCouldNotCompute*) [with SC = > llvm::SCEVExpander, RetVal = llvm::Value*]: Assertion `0 && "Invalid use of >

On Friday 27 February 2009 00:50, Nick Lewycky wrote: > David Greene wrote: > > We've upgraded to llvm 2.4 and we're hitting an assert in SCEV: > > > > llvm/include/llvm/Analysis/ScalarEvolutionExpressions.h:669: RetVal > > llvm::SCEVVisitor<SC, > > RetVal>::visitCouldNotCompute(llvm::SCEVCouldNotCompute*) [with SC = > > llvm::SCEVExpander,

Hi thank you for talking the time to help me with this. I have a sequence of numbers in a file and an equal sequence of various character, say(a b c d) each occurs more than once. I need to plot the numbers so that numbers corresponding to a in the other sequence would have green dots, those corresponding to b a red dot, nothing on c and blue square for d. i.e 2 a show a green dot 4 b show a

I have a dataframe D.F1 >dim (D.F1) 14351 9 This dataframe has values and for some 1000 rows it holds NULL values.I hace found the missing values for about 500 and have those in another dataframe D.F.sub.2 >dim(D.F.sub.2) 500 9 as dataframe is a subset of D.F1 the coulmn 1 in D.F.sub.2 is a subset of D.F1.I have to insert the values in D.F1 in other fields while the coulmn 1 in both

iH have a TDM400 w/ 1 FXS & 1FXO card. after about a day or so the FXO stops working. after a reboot i get the following error. to get the card working again i have to shutdown, physically unplug/replug the card (reboot only, power off/on does not work) any ideas what may be going wrong here? thanks - hcir Zaptel Configuration ====================== Channel map: Channel 01: FXO

* Frame-packing modes add an extra vtotal raster lines to each frame above and beyond what the basic mode description calls for. Account for this during scaler configuration (possibly a bit of a hack), during CRTC configuration (clearly not a hack), and when checking that a mode is vaild for a given connector (cribbed from the i915 driver). Signed-off-by: Alastair Bridgewater

iH using Slackware 9.1 after install the card (new) i get the following from dmesg Module 0: Not installed Module 1: Not installed Module 2: Not installed Module 3: Installed -- AUTO FXO (FCC mode) how can i determine if this is a hardware failure or an IRQ issue thanks - hcir

> -----Original Message----- > From: Iassen Hristov [mailto:ih.ng@databrokers.net] Dumb, hacky idea...but just so crazy it might work: Have Asterisk include a read receipt request when sending the voice mail message. Write a script, triggered from a sendmail alias or .forward file, that will parse the incoming receipts and handle the message deletion. Bonus points: When someone listens

Hi, I'm testing dovecot 2.1.0, on Debian 6.0, with "passdb driver = imap" and SASL for postfix's SMTP-Auth, like explained ih this howto: http://wiki2.dovecot.org/HowTo/PostfixAndDovecotSASL Authentications over IMAP (local dovecot -> remote dovecot) works fine, and it's great. Also smtp-auth on postfix (over SASL) works fine. But in the dovecot log I found this