Displaying 20 results from an estimated 9000 matches similar to: "Container-less use of speex codec??"
2007 Jul 24
0
mISDN & Asterisk 1.4: HFC-S card not responsive
Hi,
I have installed Asterisk 1.4 with mISDN with the
install-asterisk.tar.gz script from beronet.com. On my system I have two
cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to
work well with mISDN on my system from a previous installation.
Now however, the AVM card works well at first glance, i.e. it
"registers" incoming calls and works through the asterisk
2004 Sep 21
2
ISDN problem: lacking dialtone
Hi all,
this is a rather "newbie-oriented" question, so please bear with me...
The system running Asterisk has been provided with an AVM FRITZ!Card
PnP. SuSE Linux 9.0 recognizes it right after booting the system and it
seems to be configured (MSN) correctly...
The hwinfo looks like this:
---
pbx:/etc/asterisk # hwinfo --isapnp
11: ISA(PnP) 01.0: 10300 ISDN Adapter
[Created at
2005 Feb 20
1
Mandrake & CAPI
All,
I have been trying to get CAPI4Linux working on my machine and being
frank am failing miserably! I am looking for any help available, I am
real newbie (so please be gentle) and choose to run Mandrake 9.2 as it
appears quite friendly (or so I thought!).
I have been following the guidance found at
http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI for the
AVM card (actually I
2005 Jan 24
1
AVM Fritz crash
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to
work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM
Fritz CAPI driver from the AVM website and compiled against the current
kernel. However, as soon as I modprobe it I get:
CAPI Subsystem Rev 1.1.2.8
fcpci: module license 'Proprietary'
2005 Oct 10
2
AVM Fritz! + chan_capi + mISDN + PTP
Hello everyone,
I have been using an AVM Fritz! card with chan_capi and mISDN for
quite a while in PTM mode and it was working finely.
Now, I needed more DID/MSN, so I switched to PTP. But now nothing
works anymore :(
I am using Asterisk on Debian Sarge stable and installed Asterisk
along with chan_capi from apt-get. I installed mISDN from the CVS of
isdn4linux.de.
It is :
- Asterisk
2005 Mar 15
2
fcpci - capi driver for Fritz
I've put my fire proof suit on ready to ask a question ;o)
Redhat 9
Kernel 2.4.20-8
AVM Fritz PCI
Problem 1...
i have followed instructions from:-
http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install
http://www.voip-info.org/wiki-Asterisk+How+to+connect+with+CAPI
(Plus many many other sites found via google over the last 16 hours)
after modifying the makefile & defs.h,
2007 Mar 07
1
capi installation problem
Hello,
I have problem with capi, I can't install it. I have putted all info what I
did and what I get :). I think you can suggest me how to solve this
problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI
v2.1and I want to install it to my ubuntu box (kernel:
2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds
this card:
*02:0d.0 Network
2005 Sep 12
1
AW: Debian Sarge, Kernel 2.6.13 and AVM Fritz!PCI v2.0 card
Hi Jon,
perfect instructions, thank you very much.
I used them and after some tests they worked.
Here is what I did. Maybe someone could use it completely:
------------------------------------------------------------
Install helpers:
apt-get install kernel-package ncurses-dev fakeroot wget bzip2
Go to usr directory:
cd /usr/src
wget
2005 Oct 20
0
German ISDN&DSL Card "AVM Fritz!Card DSL"
Hello everyone!
Has anyone had success in configuring the "Fritz!Card DSL" card, a
combination of an ISDN adapter and a DSL modem from the german AVM GmbH
(http://www.avm.de/) in a dom0 Domain (Xen 2.0.7)?
I had success in compiling the modules from
http://www.avm.de/de/Download/index.php3 and they load fine with
"modprobe fcdsl". But with the Xen dom0 Kernel they seem to
2003 May 01
0
AVM Fritz-PCI v2.0 and Asterisk
Hello all,
I would like to know about the support for this ISDN passive card AVM Fritz-PCI
v2.0 with Asterisk:
1. which drive should I use with Asterisk: isdn4linux or capi4linux from
AVM
(I read some messages on the asterisk-users archives but I didn't find
the answer)
2. if the drive is isdn4linux then HiSAX support (for passive cards) is
enough ?
and the device /dev/ttyI0 (for
2003 May 14
2
AVM Fritz/Capi without suse ?
Hi All,
Has anyone had success with using the AVM Fritz PCI ISDN Card (v2) CAPI
drivers with a distro other than suse? The AVM driver is geared towards
suse, and after trying them with RedHat 9 I've not got very far. The
module compiles but dies when I attempt to modprobe it.
I've googled until I almost lost the will to live! What little
information
I can find seems to refer back to
2004 Sep 21
1
HELP on AVM Fritz with CAPI drivers for SMP RH 9
Hello,
I have been wrestling with installing the CAPI drivers for AVM Fritz in order
to use chan_capi with Asterisk.
I use an SMP machine, RH 9. I have found rpm's for CAPI and AVM drivers
(namely: capi4k-utils-2003.06.16-08.mungo.RH9.i686.rpm and kernel-2.4.20-8-
avmfcpci-03.11.02-08.mungo.RH9.i686.rpm), but I believe that they support only
single processor machines.
I've already
2003 Oct 10
1
Howto configure asterisk with AVM ISDN card
Hi guys, I'trying to setup Asterisk with an AVM Fritz PCI ISDN card with no
success. I have an IP phone from Micronet and I want to receive and place
calls over ISDN. But I'm not sure if I need the binary CAPI from AVM or
isdn4linux. I've tryed with redhat 9 and with Suse 8.2. Cold someone help
me? Thank you very much.
2003 Nov 19
1
fritz pci / chan_capi / australia setup
Hi * Fans,
I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28:
->
Thanks for your info but I think I have it working at last. Below are
the steps I took which might help others.
1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware
2) Download the Chan_capi from http://www.junghanns.net/asterisk/
3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which
2003 Jul 23
3
2 B channels for ISDN cards
Hi,
Is it possible to use 2 B channels simultaneously
with either I4L or CAPI drivers?
We use AVM A1 (Fritz) PCMCIA with I4L driver and
AVM B1 PCMCIA with CAPI driver.
Thanks,
Michael.
2013 Feb 25
3
First Version of OpusDrop
Hello everybody,
I just want to inform you, that the first alpha-version of a GUI for the
opustools for Windows is online available [1]. Critics and comments are
welcome - maybe someone know how to transfer that project to an open
source site.
with greetings,
Daniel Thomae
[1] http://foveon.de/sonstiges/opusdrop/index.htm
2005 Jun 28
1
AVM CAPI INSTALLATION
I use AVM fritz card A1, I have install with instruction of
Voip-info.or, but it don' work.
capiinfo
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.101-02 (49.18)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation
2006 May 19
0
Faxing with Asterisk using both ISDN and FXS
Hi everyone,
I have a question about faxing. I am running Asterisk SVN-trunk-r7498 on a
ubuntu server and everything is going fine. I have a tdm40b, a tdm04b and an
avm fritz!card pci plugged on it.
Here is what I'd like to do:
Receiving fax via the ISDN avm fritz!card, sending the fax via email (for
the moment I know I can do that) but also routing the fax trough my old fax
machine which
2009 Apr 23
0
Fritz USB 2.1 on Asterisk 1.4.22 / trixbox
Dear Sirs,
I've a Fritz USB 2.1 card like this:
Bus 002 Device 003: ID 057c:1900 AVM GmbH ISDN-Controller FRITZ!Card v2.1
I'd like to use it with trixbox/asterisk.
I've already some experience with other cards and mISDN, but I can't make
this card work with it.
I've downloaded the driver from ftp.avm.de but don't know what to do with
it.
I think I should load the
2004 May 06
0
AVM Fritz doesn't pick up call or make calls
Hi,
I have an AVM Fritz! ISDN card connected to an NT1 unit (Australian).
I have no problems getting the drivers up and running but when using it with
asterisk nothing happens.
I call in using a mobile or analogue phone on either of the numbers and the
NT1 activity light either flashes or goes solid while ringing but it pauses
for a while and on a mobile i get call not answered and a busy