similar to: CentOS Dual Core 2 mainboard

lvm 3.7.0 treats pentium dual core ( cpu family 6 model 23 ) as "penryn" cpu, which triggers a serious bug : - crashs in openGL programs when llvm is used by mesa package, llvm will produces binary code with SSE4 instructions, which is not compatible with pentium dual core, because this CPU doesn't support SSE4 instructions ( bad cpu opcodes ), with llvm 3.6.2 this bug doesn't

Hello, I am looking into building a workstation using Xen to host several operating systems. Looking at the pci passthrough requirements of Xen4.1 on the VTdHowTo<http://wiki.xensource.com/xenwiki/VTdHowTo>page, I am a little puzzled with the fact that only Intel Core2Duo (with VT-x), Core2Quad, i7 and Core i5 (vPro Brand) CPU''s are supported while motherboards with the i55x0

(a) Mark (mhr) suggested I buy a bare bones box, when I reported the problem with the mainboard in this Dell Dimension 2400 box. Possibly I can have the mainboard repaired (and the PSU, if it is also having problems), and if so, I will give this one to my Stepson and go the bare bones box route and have a more powerful box for myself. I looked at two (2) very low end Desktop mainboards in the

https://bugs.freedesktop.org/show_bug.cgi?id=63101 Priority: medium Bug ID: 63101 Assignee: nouveau at lists.freedesktop.org Summary: [Ubuntu 10.04.4 LTS 32-bit] NVIDIA GeForce 7300 GT AGP graphics card will not display any text characters on VIA Technologies Apollo MVP3-based mainboard QA Contact:

I've just got bunch of RHEL4 erratas (looks like U2 is out). Looking at the kernel errata (kernel-2.6.9-22.EL), one of the things in list of new features is "Intel dual core support". What does this exactly means? Does it mean if I have dual core pentium processor and use older kernel that it will use only one core, and I need newer kernel to use both cores? Or is it only

Hey all, I was planning on getting a new computer for the new year to help with my dissertation research, and recently had an opportunity to compare the performance of my 1.6 GHz Pentium M laptop, and a 2.8 GHz dual-core Pentium processor (both running WinXP professional 32-bit). I run a lot of long simulations, so I was hoping to get something that would speed them up. I ran a few quick

After yum upgrade, the new CentOS5 kernel [ kernel-2.6.18-92.1.1.el5.i686 ] crashes each time early in boot process on Compaq ProLiant 3000 with dual Pentium3 CPU (600 MHz, CPU0: Intel Pentium III (Katmai) stepping 03, CPU1 the same). I get kernel panic at powernowk8_init+0x05e/0x1c3. The previous kernel [ kernel-2.6.18-53.1.21.el5.i686 ] seems to work fine. I am wondering if anyone has met

Dear R-developers, the following may seem a weird question for R-devel – I try anyway, because it does seem to be related to usage of R and R's way of interacting with the hardware. When running R (2.4.0) on my new dual core Windows XP system (Intel Core 2 Duo E6600, Mainboard ASUS P5B, BeQuiet Power Unit), I observe various types of sounds (not related to fans) when running at full

Hello ! I''m using the latest xen packages from http://packages.debianbase.de/sarge/amd64/xen3/ on debian sarge with the provided kernel linux-xen0-2.6_2.6.12+xen3.0.1-0tha6_amd64.deb (xen-linux-2.6.12.6-xen). I successfully installed that combo on a Tyan GT20 Server with an Athlon64 3000+ (Venice), 1GB RAM . Thats running fine, I made some debootstrapped filebased debian sarge systems

Alrighty. I'm having a hell of a time and I need help. I'll try to give as much information as possible. ---------- HARDWARE ---------- MB: Supermicro PDSBM-LN2+ Intel 946GZ ICH7R + Intel? 82573 Memory: Crucial 512Mb, 1Gb, 2Gb modules matched to above MB. Processors: Intel Celeron 420 Conroe-L, 1.6GHz 512KB 64-bit Intel Core 2 Duo E6320, 1.86Ghz 4Mb 64-bit Intel Pentium E2140

Hello everybody, today I had some time to test Peter´s decoding plugin on a very slow machine. My setup: - Pentium "classic" @ 50 MHz (underclocked!) - Mainboard with Mercury Chipset (I think) - CD-ROM and HDD in PIO-Mode (CPU intensive) - MAD16 Soundcard (ISA slot, CPU intensive) - Win95B, Winamp 2.76, Decoder Plugin 1.16 (RC 2) The hardware setup is something like the

Hi, As it has been brought to my attention (by several parties), my current MB does not support VT-d. Since I don''t feel like purchasing a brand new system, I have searched for replacement MB-s that would fit into my existing uATX case, support my C2D CPU, and support at least 4x2GB ram. I have narrowed it down to the following four models: SUPERMICRO MBD-C2SBM-Q-O (Q35 chipset)

hi all: When I install CentOS 3.3 x86_64 on a athlon64 with a Gigabyte K8NS mainboard(nForce3 250 chipset), it hangs after detecting IDE controller. I've tried to pass acpi=no to kernel, but the problem still exists. can anyone help me? thanks!

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

Hello CentOS Community, So I bought a NIC (using the Intel 82579V chipset) that supports Dual RX and TX queues , my goal with that is so iam able to see and use two IRQs in /proc/interrupts and hence be able to take advantage of 2 cores on my CPU. Instead I only see one IRQ being used, and hence only one CPU core.. Please see below. Advisement is appreciated! Alex

This has got to be a stupid error I'm making... I have been experimenting with different hardware and software configurations before I decide what to use as a production platform. Up until just recently things were going well. But now it appears I'm unable to get access to my TDM400p from Asterisk. I know the TDM card works fine, used it in another machine where it performed flawlessly.

Anyone knows if the SC430, based on the Intel E7230 chipset, is compatible with the Digium cards? I've tried the compatibility page on digium's website. It seems like they've pulled the old compatibility list, now the links on the page only point back to the product pages. Over here, Dell is selling (for a short period of time), SC430 with Pentium D 820 Dual Core Processor 2.8GHz,

Hi, I installed World of Warcraft on Wine, but I have a problem, World of Warcraft works very slow, and is impossible to play. Some time ago I tried World of Warcraft on Wine, when used Ubuntu and works great, but now works very slow. Wine version: 1.3.25 O.S.: ArchLinux 64 bits with desktop environment Gnome 3. Graphics: Mobile Intel GM45 Express Chipset Integrated Graphics CPU: Pentium(R)

Thank you for your advise, I'll find something with a lot of memory.... Adrien -- Adrien Laurent - CIO 514-284-2020 adrien@modulis.ca www.modulis.ca -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jason Walker Sent: Saturday, October 01, 2005 12:25 AM To: 'Asterisk Users Mailing List - Non-Commercial