similar to: create 1000 vNICs and attach to them DOT1X profiles

1 simple question about network statistics for vnics: We noticed that the statistics for vnics (used by Virtualbox guests) are not there. When the nics are plumped in the host OS, we do see them showing up, but all all records are 0. Can someone tell me how to get the correct network info via snmp on the Vbox Host?? Thanks in advance. IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING:

So, just to play with vnics with 106, I have... e1000g2 plumb''d with 192.168.85.10 vnic0 is created on top of e1000g2 with 192.168.85.22 I snoop on e1000g2 to see the traffic. I ping 192.168.85.22 and it works. I stop the snoop on e1000g2. I ping 192.168.85.22 and it doesn''t work. I start the snoop on e1000g2. I ping 192.168.85.22 and ping works. Is this a new feature with

I have a requirement in my current project to support multiple co-located zones on the same VLAN. Our current deployment OS is Solaris 10 Update 4. I''d like to use exclusive IP zones, but I gather the only way to currently have multiple exclusive zones with interfaces on the same VLAN is through the use of VNICs. From my initial look at S10u4, it seems VNIC support been not yet been

Hello, I am trying to walk through the following document: http://homepages.lu/charlesschwartz/radius/freeRadius_AD_tutorial.pdf in order to authenticate Cisco router and switch logins against FreeRadius/Active Directory. Using the HowTo, I have successfully joined a FC2 box to our Windows 2003 AD for testing purposes. I have also successfully used the manual ntlm_auth command to authenticate

Hi, I'm trying to connect my CentOS 6.8 laptop to the wireless net at work, which is secured with WPA2 and AES. I've done this successfully in the past using NetworkManager, but a new safety feature was recently introduced: A CA certificate is required. After this, I've not been able to connect. I have a DER format file, whose path I've entered in CA certificate: in the

redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #

I am attempting to discern the efficacy of controlling or filtering ARP (gateway/client) to mitigate unauthorized connections to wifi networks. As such, I am aware that EAP was originally devised to allow for: " the negotiation of an authentication protocol for authenticating its peers BEFORE allowing network layer protocols to transmit over the link" (RFC2284) However, this

I've noticed that when a Windows computer that is in my domain connects to my WPA-Enterprise wifi it first attempts to authenticate with the SSID using the domain member's machine account, instead of prompting the user to enter their own credentials. Has anyone ever tried to do this with a Linux domain member? For example, my linux domain member laptop uses Network Manager as the GUI,

I previously had WPA radius authentication working from my laptop to my home network with the laptop running Fedora Core 6 and the server running freeRadius under CentOS 4.4 (freeradius-1.0.1-3.RHEL4.3). I'm attempting to move my FC 6 boxes to CentOS 5 so I decided to pick on the laptop first. Unfortunately, I neglected to backup /etc before doing the CentOS 5 install (bad Dave, bad

Hi Michael and Samba-team, I found below message on the list, but it looks like nobody replied to it. I have the configuration setup on the Samba-side and indeed it works on Windows with machine-account authentication. It connects to wifi before a user logs in and there is no chance of lockout due to an expired user password in the wifi configuration. I would love to have the same working on

How do I create a vnic that represents the factory assigned MAC address of my physical nic? The bge device in my system (x2100) appears to support 4 MAC addresses. The driver reserves the first as the ''primary/default'' address and allows manipulation of the other three via the MAC_CAPAB_MULTIADDRESS interface. I''d like to use vnics on this system, as I have Xen guest

Hi, We are planning to integrate CISCO-ISE with Samba-AD (Version 4.6.5). Websense gateway / proxy are all properly integrated and even single sign-on is properly functioning. However, before attempting integration of Cisco ISE with Samba-AD, through I should clarify on the following. Hence writing this mail. Cisco ISE supports LDAPs with Following authentication methods: * Extensible

Hi all, I want to make initial VoIP authentication process from asterisk server to be based on EAP-SIM authentication of Freeradius server (so it will be not necessary to insert account datas in the asterisk database). Is there any way of doing that from Freeradius and Asterisk? Or at least, is there any way to sync the EAP-SIM data on Freeradius to asterisk server? thank you -------------- next

Hi, I have a freeradius server that is working well in university. We use EAP-TTLS and PAP protocols. Users from Windows can use Securew2. Users from Linux and Mac OS X luckily have native support for EAP-TTLS and PAP. (if you think is Off Topic, keep reading on). On Ubuntu I can use the nm-applet for setting the connection up. But I'd want to find a way to automatize it, that it finds the

With Samba in NT mode, i was able to enable wireless access using machine account, and worked decently. Now i want to try again in AD mode, but i've not found info, and i've just hit a trouble: Oct 1 14:31:55 vdmsv1 radiusd[13555]: rlm_ldap (ldap): Opening additional connection (25), 1 of 31 pending slots used Oct 1 14:31:55 vdmsv1 radiusd[13555]: (187) Login incorrect:

Not sure if this is off topic but I installed freeradius with yum on centos 5 and I'm hoping someone has some advice on getting DNIS proxy working In the acct_users file I have DEFAULT Called-Station-Id == "5500", Proxy-To-Realm := "xxx" Fall-Through = yes In the proxy file I have realm xxx { type = radius authhost = xxxx:1645

Den 01.10.2020 14:46, skrev Marco Gaiarin via samba: > With Samba in NT mode, i was able to enable wireless access using > machine account, and worked decently. > > Now i want to try again in AD mode, but i've not found info, and i've > just hit a trouble: > > Oct 1 14:31:55 vdmsv1 radiusd[13555]: rlm_ldap (ldap): Opening additional connection (25), 1 of 31 pending

I've tried emailing this to centos-tm at redhat.com , but mailer-daemon at googlemail.com sent me this Delivery to the following recipient failed permanently: centos-tm at redhat.com Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the server for the recipient domain redhat.com by mx1.redhat.com. [209.132.183.28]. The error that

I can share my notes, we authenticate UniFi clients via Freeradius against Samba AD. We also check group membership which you might or might not need: ## 4 FreeRADIUS ### 4.1 Basics ```bash apt install freeradius freeradius-ldap freeradius-utils # create new DH-params openssl dhparam -out /etc/freeradius/3.0/certs/dh 2048 ``` ### 4.2 Configure Authentication - modify mschap to use winbind,

Hello I managed yet to create a KVM Virtual Machine with several network interfaces (vNICs) and to make it boot from network using PXE. Anyway I noticed that, if there is no answer from a pxe server on the first vNIC, the dhcp request is sent on every vNIC until it gets a response (or the vNIC list ends). I would like to know if there is a way to specify that the dhcp request should be