similar to: End of search string question

I ran into the same problem after somebody uninstalled logcheck and I re-installed it. It turned out that the ownership of /var/lock/logcheck where root:root - sudo chown logcheck:logcheck /var/lock/logcheck solved it. I see that there already is a check for the permissions in the postinst which (as far as I can see) *should* have fixed the permissions and ownership there. When re-installing

hi all i'm trying to get ipfilter set up on my new 5.1-RELEASE box. ipfilter seems to be working fine. i just have a couple of issues that are probably not very serious... one thing is that during network startup at boot, i get the message IPFilter: already initialized repeated 4 times. i think i have everything configured properly my kernel config looks like options IPFILTER options

Package: logcheck-database Version: 1.2.61 Severity: wishlist File: /etc/logcheck/ignore.d.server/bind After #437891, I got yet another new "unexpected RCODE", this time "NOTIMP". As I was starting to get pissed off, I copied the whole list out of lib/dns/result.c, in an attempt to put an end to my headache. If you insist on using an enumeration instead of ".*",

Hello, Some time ago I wrote PR conf/48170, which discussed the following problem: Syslog messages of facility LOG_AUTHPRIV and priority LOG_NOTICE (or higher) are sent by default to the world-readable log file /var/log/messages. That seems unacceptable since the facility LOG_AUTHPRIV is for hiding sensitive log messages inside a protected file, e.g., /var/log/auth.log. For example, login(1)

I don't know if this is already common knowledge, and it's not specificly for Asterisk, but if you are using Cisco phones and want to roll XML applications, make sure you have "Connection: close" in your HTTP header. Without it screen loads are very sluggish. In PHP, do: header("Connection: close"); I whipped up quick-and-dirty PHP/MySQL/Cisco XML directory and

My problem is there I download and archive my work to the freebsd server via samba. When I'm transfering files from the windows -> freebsd I will get anywhere between 20-100kB/s and from freebsd -> windows I will get a few mbps. I'm getting no where near a full 100mbps and both ethernet cards are set for 100mbps full duplex working great. I've tried increasing buffer sizes on

On 01/20/2012 09:00 AM, Tait Clarridge wrote: >> > But a new problem arises ... one of the m0n0wall instances needs to use >> > DHCP to get a dynamic IP from my ISP (the others are static, so they're >> > ok). How do I get the bridge to proxy the DHCP request and forward the >> > response to the VM guest? I brought up a test instance of m0n0wall but

Hello. I am a relatively new FreeBSD user. I have samba, ssh and vnc server running on it. I am also trying to set up the IPFILTER on it. I used the handbook to familiarize myself with the software and the sample script provided in the chapter discussing ipf, I decided to use as a starting point. After reading the ipf chapter I assumed that if "block in log first quick on xl0 all" is

Dear list, A few days ago one of my machines were attacked by a DDoS-attack using UDP on random ports.. When I later on analyzed the logs, I found this in my dmesg: xl0: initialization of the rx ring failed (55) xl0: initialization of the rx ring failed (55) xl0: initialization of the rx ring failed (55) I tried to find out on google what it ment, but without any luck. What does that mean and

Referring to my previous post about degradation of voice quality when having more than 2 connection. The actual route is: pc xlite -> local asterisk box -> iaxtel -> local asterisk I have tried out a different situation: pc xlite -> local asterisk box -> iaxtel and the second connection pc xlite -> local asterisk box -> iaxtel -> local asterisk The same degradation

Hi All, A couple of weeks ago I noticed Askozia PBX, which is a new embedded Asterisk & OS distro at http://askozia.com/pbx. This caught my attention for two reasons; it uses v1.4 of Asterisk, and it uses the m0n0wall development framework to build on FreeBSD with a PHP based GUI. I've used m0n0wall for years, and FreeNAS also, which shares the same OS/GUI framework. I booted the latest

I have just checked the Openbsd box on the if interface. fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 address: 00:02:55:30:54:28 media: Ethernet autoselect (100baseTX full-duplex) status: active inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::202:55ff:fe30:5428%fxp0 prefixlen 64 scopeid 0x1 xl0:

Hello, I'm having problems getting my samba setup to work at a little LAN i partially maintain. I've been reading quite a lot about what I could think of being related to my problems/setup, and I've also googled my ass off :( So here I am, resorting to you guys in hope of help =] Sorry to say, but I don't have much experience, and therefore I'm a bit lost at the moment. Not

Hi All, I need to establish an IPSec tunnel between two FreeBSD systems, using IPv6 addresses.The connetcion is host-to-host between two FreeBSD( RELEASE 4.11) systems with KAME IPSec implementation. I tried to establish the connection, but it has some problems which are explained below. |----------------->| host1-[mohan]| |host2-[ram]

Hi All, I need to establish an IPSec tunnel between two FreeBSD systems using IPv6 addresses.The connetcion is host-to-host between two FreeBSD( RELEASE 4.11) systems with KAME IPSec implementation. |----------------->| host1-[mohan]| |host2-[ram] |<-----------------| host1 IPv6 address : fe80::2b0:d0ff:fe6f:dfa0 host2 IPv6 address :

Hello CentOS gurus, and a belated Happy New Year (or an early Happy Chinese New Year). I'm in the process of building a CentOS-6 KVM host machine whose only function will be to run four independent 'm0n0wall' firewall guest instances. I have a couple of quad-port Intel NICs to provide four WAN-side and four LAN-side ports, which will not be shared with any other guests. Remote

Hello, I have the following hardware configuration. Tyan 2466N motherboard, 1.03 BIOS, 2 Athlon-MP 1800+ CPUs, 512MB registered ECC DRAM, Onboard 3Com NIC (xl type) Radeon 8500 AGP video card Adaptec 3210S SCSI RAID controller Comtrol RocketPort 8 port PCI serial card I have started to experience some odd system lockups in the past couple months, and it seems to be getting worse. I particular,

Hi there. This is with regards to samba-3.0.23c, on FreeBSD 6.0-RELEASE-p12 Previously I had Samba up and running without any problems. Then I decided to do a tiny upgrade by simply switching to a new motherboard, while keeping all other hardware and software aspects the same. However, after the upgrade, netbios name resolution seems to have stopped working somehow. \\servername lookups no

Hi folks - I've been beating my head against the wall for a couple days on this issue, and I'm hoping someone here can help me. I've been running Samba successfully on Debian for some time now, and this problem started recently. I'm unable to determine what has changed on my system. Whenever I attempt to access a share the requires setuid (i.e. guest access), Samba panics and

I know a SIP client behind a NAT trying to peer with Asterisk behind another NAT is troublesome. Has anyone had any luck doing this by interfacing Asterisk to the WAN using 1:1 NAT translation to give it a public IP while still firewalled? In my instance I'm using m0n0wall, but this is a hardware-neutral question. Thanks. -- Robert Goodyear Brand Up LLC http://www.brand-up.com