freebsd security - Jun 2005 - Problem with IPSec tunnel, using IPv6 addresses, between Two FreeBSD systems...?

Hi All,

I need to establish an IPSec tunnel between two
FreeBSD systems using IPv6 addresses.The connetcion is
host-to-host between two FreeBSD( RELEASE 4.11)
systems with KAME IPSec implementation.


                |----------------->|
   host1-[mohan]|                  |host2-[ram]
                |<-----------------|

host1 IPv6 address : fe80::2b0:d0ff:fe6f:dfa0 
host2 IPv6 address : fe80::2b0:d0ff:fe48:7ce7

The 'ipsec.conf' file at Host1 and Host2 are attached
along with this email.(you can refer them)

IPsec is started with the following commands at both
systems:
*******at Host1*******
mohan# /usr/local/etc/rc.d/setkey.sh start
Starting VPN tunnel encryption..Ok
mohan#
*******************
*******at Host2*******
ram# /usr/local/etc/rc.d/setkey.sh start
Starting VPN tunnel encryption..Ok
ram#
*******************
(File setkey.sh is also attached with the email below
for ur reference)

After that I executed 'ping6' and 'tcpdump' commands
to test the connection(on my system i.e.,host1-mohan),
but, it seems is not working properly...

########### ping6 command output at host1 ############
mohan# ping6 -I xl0 fe80::2b0:d0ff:fe48:7ce7
PING6(56=40+8+8 bytes) fe80::2b0:d0ff:fe6f:dfa0%xl0
--> fe80::2b0:d0ff:fe48:7ce7
^C
--- fe80::2b0:d0ff:fe48:7ce7 ping6 statistics ---
6 packets transmitted, 0 packets received, 100% packet
loss
mohan#
#############################################

But, with tcpdump command it seems like packets are
moving from host1 to host2 without ESP(encryption) and
 reply packets from host2 to host1 with
ESP(encryption) header. It is shown in the following
output:

########## tcpdump at host1 ###################

mohan# tcpdump -i xl0 host fe80::2b0:d0ff:fe6f:dfa0
tcpdump: listening on xl0

10:08:43.844723 fe80::2b0:d0ff:fe6f:dfa0[host1] >
ff02::1:ff48:7ce7[host2]: icmp6: neighbor sol: who has
fe80::2b0:d0ff:fe48:7ce7

10:08:43.845127 fe80::2b0:d0ff:fe48:7ce7 >
fe80::2b0:d0ff:fe6f:dfa0: ESP(spi=0x0000fead,seq=0xf)

10:08:44.844736 fe80::2b0:d0ff:fe6f:dfa0 >
ff02::1:ff48:7ce7: icmp6: neighbor sol: who has 
fe80::2b0:d0ff:fe48:7ce7

10:08:44.845109 fe80::2b0:d0ff:fe48:7ce7 >
fe80::2b0:d0ff:fe6f:dfa0: ESP(spi=0x0000fead,seq=0x10)

10:08:48.844804 fe80::2b0:d0ff:fe6f:dfa0 >
ff02::1:ff48:7ce7: icmp6: neighbor sol: who has
fe80::2b0:d0ff:fe48:7ce7

10:08:48.845150 fe80::2b0:d0ff:fe48:7ce7 >
fe80::2b0:d0ff:fe6f:dfa0: ESP(spi=0x0000fead,seq=0x13)

10:08:49.085694 fe80::2b0:d0ff:fe48:7ce7 >
fe80::2b0:d0ff:fe6f:dfa0: ESP(spi=0x0000fead,seq=0x14)

10:08:49.844840 fe80::2b0:d0ff:fe6f:dfa0 >
ff02::1:ff48:7ce7: icmp6: neighbor sol: who has
fe80::2b0:d0ff:fe48:7ce7

10:08:49.845232 fe80::2b0:d0ff:fe48:7ce7 >
fe80::2b0:d0ff:fe6f:dfa0: ESP(spi=0x0000fead,seq=0x15)

10:08:50.085696 fe80::2b0:d0ff:fe48:7ce7 >
fe80::2b0:d0ff:fe6f:dfa0: ESP(spi=0x0000fead,seq=0x16)

10:08:51.085741 fe80::2b0:d0ff:fe48:7ce7 >
fe80::2b0:d0ff:fe6f:dfa0: ESP(spi=0x0000fead,seq=0x17)

######################################

Please, reply me what is the problem with the
connection setup.Inform me is there any mistakes with
the ipsec.conf file, policy setup..? Reply as soon as
possible..

If you need any detail regarding the setup, I will
send the details..

Please, give me proper suggestions..any help will be
appreciated greatly..

Thanx,

with Regards
Mohan. 




		
__________________________________________________________
How much free photo storage do you get? Store your friends 'n family snaps
for FREE with Yahoo! Photos http://in.photos.yahoo.com
-------------- next part --------------
########The 'ipsec.conf' file at Host2 #########

# flush configs
flush ;
spdflush ;

# add a SAD entry
add fe80::2b0:d0ff:fe48:7ce7 fe80::2b0:d0ff:fe6f:dfa0 esp 0xFEAD -m transport -E
3des-cbc
"ipv6readylogo3descbcout1" -A hmac-sha1
"ipv6readylogsha1out1";
add fe80::2b0:d0ff:fe6f:dfa0 fe80::2b0:d0ff:fe48:7ce7 esp 0xFEED -m transport -E
3des-cbc
"ipv6readylogo3descbcin01" -A hmac-sha1
"ipv6readylogsha1in01";


# and specify what has to be encrypted
spdadd fe80::2b0:d0ff:fe48:7ce7 fe80::2b0:d0ff:fe6f:dfa0 any -P out ipsec
esp/transport/fe80::2b0:d0ff:fe48:7ce7-fe80::2b0:d0ff:fe6f:dfa0/require ;

spdadd fe80::2b0:d0ff:fe6f:dfa0 fe80::2b0:d0ff:fe48:7ce7 any -P in ipsec
esp/transport/fe80::2b0:d0ff:fe6f:dfa0-fe80::2b0:d0ff:fe48:7ce7/require ;
-------------- next part --------------
########The 'ipsec.conf' file at Host2 #########

# flush configs
flush ;
spdflush ;

# add a SAD entry
add fe80::2b0:d0ff:fe48:7ce7 fe80::2b0:d0ff:fe6f:dfa0 esp 0xFEAD -m transport -E
3des-cbc
"ipv6readylogo3descbcout1" -A hmac-sha1
"ipv6readylogsha1out1";
add fe80::2b0:d0ff:fe6f:dfa0 fe80::2b0:d0ff:fe48:7ce7 esp 0xFEED -m transport -E
3des-cbc
"ipv6readylogo3descbcin01" -A hmac-sha1
"ipv6readylogsha1in01";


# and specify what has to be encrypted
spdadd fe80::2b0:d0ff:fe48:7ce7 fe80::2b0:d0ff:fe6f:dfa0 any -P out ipsec
esp/transport/fe80::2b0:d0ff:fe48:7ce7-fe80::2b0:d0ff:fe6f:dfa0/require ;

spdadd fe80::2b0:d0ff:fe6f:dfa0 fe80::2b0:d0ff:fe48:7ce7 any -P in ipsec
esp/transport/fe80::2b0:d0ff:fe6f:dfa0-fe80::2b0:d0ff:fe48:7ce7/require ;

On Thu, Jun 30, 2005 at 07:51:43AM +0100, mohan chandra
wrote:
> Hi All,
> 
> I need to establish an IPSec tunnel between two
> FreeBSD systems using IPv6 addresses.The connetcion is
> host-to-host between two FreeBSD( RELEASE 4.11)
> systems with KAME IPSec implementation.
[snip]

Hi

Please resend this question to freebsd-questions@freebsd.org, as it
does not belong on this list. If you are unsure what to send to which
list, see the list charters at 

  http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/eresources.html

thanks, t.