>In my instance I'm using m0n0wall, but this is a hardware-neutral
>question.
Sometimes, yes and no. The trick in Monowall I founds is to use the " auto
add " in Monowall to create the rules. If you manually create the rule, she
don' work. Why? Dunno. Using 1.11 built on Thu Nov 11 23:02:41 CET 2004
generic-pc-cdrom. Works behind my mother in law's crappy SMC router with
appropriate rules created.
Firewall > NAT
Interface > Wan
External Address > External IP
Protocol: tcp/udp (snom for example can pass either)
Source: Any
Port: Any / Any
NAT IP > Your Asterisk Server IP
Local Port > (Other) 5060
Description: Asterisk SIP rule
" Auto-add a firewall rule to permit traffic through this NAT rule is
CHECKED! "
Firewall > NAT
Interface > WAN
External Address > External IP
Protocol > tcp/udp
Source > 10000-20000
Port > Any / Any
NAT IP > Your Asterisk Server IP
Local port > 10000:20000
Description: Asterisk Media Stream Rule
" Auto-add a firewall rule to permit traffic through this NAT rule is
CHECKED! "
Tested w/ X-Ten & Snom 190 YMMV HTH
-----Original Message-----
From: Robert Goodyear [mailto:me@jrob.net]
Sent: Monday, July 11, 2005 9:58 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] SIP NAT + m0n0wall 1:1 mapping
I know a SIP client behind a NAT trying to peer with Asterisk behind
another NAT is troublesome. Has anyone had any luck doing this by
interfacing Asterisk to the WAN using 1:1 NAT translation to give it a
public IP while still firewalled?
In my instance I'm using m0n0wall, but this is a hardware-neutral
question.
Thanks.
--
Robert Goodyear
Brand Up LLC
http://www.brand-up.com
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users