similar to: Call Deflection on PRI

Hi I installed Asterisk 1.8.7 with CD ISO(Elastix 2.2) I want to use DAHDISendCallreroutingFacility Application on a PRI link(LIBPRI Already installed). according to https://wiki.asterisk.org/wiki/display/AST/New+in+1.8 Asterisk 1.8 include this application but I cannot see it with "core show applications" Do I need to install mISDN or other modules for using that ? Regards M.Shirazi

Hello my friends, I've a doubt, i want to be able to forward the incoming calls from PSTN to my cell phone...i mean, qhen i'm out of the office i need like aq macro that helps me to forward the incoming call that goes for example to my internal extension SIP 207, i 've this macro but i can make it work properly....i can't activate the forward in the phone, is quite confuse:

hi ppl :D my configuration is as follows, i run (let's call it machine 2) debian etch 4.0 and asterisk 1.2, i use voiceone (www.voiceone.it) as an interface to manage asterisk, I have a grandstream/handytone 486 as a sip device, no PSTN line or anything like that all SIP only. I have a machine (machine 1), which functions as my router and machine 2 and sip device are behind it, grandstream box

Hi, I have just installed a Sirrux PC140 card for the first time. Managed to build the drivers and get * to load them on FC4, but it does not work. It seems that layer1 in the ISDN is not even activated. The same ISDN lines connected to a Samsung DCS works so it is not the lines. I am including my sirrix.conf and the output of some of the * Srx commands below. Any pointers would be

What is CFU and CFNR? > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Michel Koenen > Sent: Tuesday, August 30, 2005 1:46 AM > To: asterisk-users@lists.digium.com > Subject: RE: [Asterisk-Users] How to use * and # as part of > numberindialcommand > > > From: "Damon

Hi! I'm here again with echo canceller problem... :-( I think I've done everything to enable echo canceller feature, but it still doesn't work... Can anybody tell me if there is some error or something missing in this configuration please? I'm using Eicon Diva Server 4Bri. http://www.eicon.com/worldwide/products/MediaGateways/disv4bri.htm?techspec=1&regID=4999 Card

Yo all, As there has been some intrest, here's my updated version: I post it to "-dev" as well as "-users", as it may be of intrest to both. Inspired by the example in the tips & tricks-section of "http://www.junghanns.net/asterisk/", I built a more elaborate set of features. Currently, my implementation supports call- forward unconditional, on no answer

Dear All, I can not transfer call in progress. What's wrong with my macro? I think tT flags is enough right? [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})}) ; Get CFU key exten => s,2,Set(DNDStatus=${DB(DND/${ARG1})}) ; Get DND key exten => s,3,GotoIf($["${temp}" = ""]?5) ; If not existing, goto priority 5 exten =>

Dear All, I have a problem with call transfer. When I dial a number and then I want to transfer current call to an extension, I'm getting disconnected. Transfering incoming call works fine. I'm using macro for dialing. extensions.conf: [from-internal] ignorepat => 9 exten => 200,1,Macro(stdexten,200,SIP/dzalewski) [macro-stdexten] exten => s,1,Set(temp=${DB(CFU/${ARG1})})

Hello List Next question where google did not spit out an unsable answer. When redirecting a call with Transfer, I would like to correctly indicate the reason. I did try this: exten => XX,1,NoOp(Call to ${EXTEN} from ${CALLERID(all)}) exten => XX,n,Dial(SIP/ZZ) exten => XX,n,set(REDIRECTING(reason)=cfb) exten => XX,n,Transfer(SIP/YY) I did try with 'reason'

Hello List, I am having a strange issue with a trixbox system we installed for a client, and I would appreciate any help on this one. The issue is that occasionally when they go to answer an inbound call from the Sangoma A200 - there is no one there, and they are presented with dial tone. The calling party is hung up. A bit of background: The client actually has two systems install (one at

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

Problem: *Call* *waiting* comes in, I press flash to answer it, and the first caller gets disconnected after 3 seconds. This is all ZAP - no VOIP. System: Analog stations and trunks running on a pair of TDM400's. It does NOT have * call* *waiting* from the phone company, and I have enabled it in all my conf files. The trunks are set to FXSKS and the stations are FXOKS. I am not using *call*

Hi chan_capi users, this thing is awesome, no delays like in modem_i4l! Plus, it got those nice ISDN features. Here's my question: Does my service provider (Deutsche Telekom) have to provide me with these Services (CD, ECT)? (the Readme in 0.2.5 says "does not relay on service CD") I know, that I don't have CFU,CFNR,CFBS (which I would have to order seperately). How likely

Yo, Inspired by the example in the tips & tricks-section of "http://www.junghanns.net/asterisk/", I built a more elaborate call divert-feature. This one validates if the extension a call-forward is to be set to is actually valid for the current context and additionally saves this context into the DB and always uses it to originate the divert from, as you can't expect the

Previously incorrectly sent to asterisk-dev list, sorry. I tried today while connected to a Jtec QSIG E1 card, with DAHDISendCallreroutingFacility with the following test dialplan: Extension 4888 is on the Fujitsu [incoming] exten => 8688,1,Answer() exten => 8688,n,Playback(connecting) exten => 8688,n,DAHDISendCallreroutingFacility(4888,8688) exten => 8688,n,Playback(goodbye)

I am still getting these in my maillog: Jul 13 07:39:38 pop5.cfu.net dovecot: IMAP(breu at cfu.net): Corrupted index cache file /var/spool/mail/filer/storage//cfu.net/b/r/breu/dovecot.index.cache: invalid record size Jul 13 09:35:03 pop5.cfu.net dovecot: IMAP(breu at cfu.net): Corrupted index cache file /var/spool/mail/filer/storage//cfu.net/b/r/breu/dovecot.index.cache: invalid record size

Reid and Bill, Thank you very much for your helpful comments. Your comments helped me find out what part of my work was wrong that my changes were not effective in llvm-gcc. Thank you again, Babak On May 9, 2007, at 1:57 PM, Reid Spencer wrote: > On Wed, 2007-05-09 at 13:38 -0700, Babak Salamat wrote: >> I am convinced to use llvm-gcc. As I mentioned in my previous email, >> I

On Wed, 2007-05-09 at 13:38 -0700, Babak Salamat wrote: > I am convinced to use llvm-gcc. As I mentioned in my previous email, > I have changed native code generation in llc to generate code with a > different stack organization. In order to have working binaries, the > libraries must be compiled with the new tool and have the same stack > organization. Now that I cannot use

I did the following: - chan_capi-0.3.5/Makefile: uncommented CFLAGS+=-DDEFLECT_ON_CIRCUITBUSY - recompile asterisk + chan_capi - added /etc/asterisk/capi.conf: deflect=0800123456 ; some 0800 test number - in etc/asterisk/extensions.conf under [tcom-in]: exten => 98765,1,capiCD(0800123456) - made both b channels busy by outcalling on both lines (ISND BRI) - called my msn (98765) by mobile