similar to: Parking, playback for at least 500 parallel calls and pickup one

Anyone want to talk briefly about one-button call parking/pickup on Asterisk with Polycom phones? Does anyone use it or know to do it? On many phone systems there are 2 or 3 park buttons, and you can park a call onto an unlit park button, and then the light flashes. You can go to any other phone, and press the park button with the flashing light to pick up the call. Super easy from the

I have a simple asterisk install (1.4.18), and want to use call parking. I can successfully park a call (I see on the CLI that the call is parked to 701). Everything is pretty default. However, I can't pickup a call from another phone. When I dial 701 from a phone, asterisk can't find that extensions and notifies the person picking up that the extension doesn't exist. (It appears

> -----Original Message----- > From: Jerry Geis [mailto:geisj@pagestation.com] > Sent: September 8, 2004 2:19 PM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] T100P calls with playback starts speaking > before pickup > > > Hi > > I am using a T100P connected to a panasonic phone switch using T1 and the > switch has 4 analog lines

I'm still struggling to pickup calls. I now have a single context (entryocginternal) where I have "include => parkedcalls". The log below shows me calling from one internal extension to another, then picking up, then parking the call. -- SIP/239-0915d5c8 is ringing -- SIP/239-0915d5c8 answered SIP/233-0915bf40 -- Packet2Packet bridging SIP/233-0915bf40 and

Hi All, How to park and pickup a call? The scenario of park and pickup described as below. UserA made a call to UserB, and the call ware connected, Then UserB parked (or hold) the call, and told UserC to pickup the call on one line, and then, UserC pressed some keys to pickup the call. Who can tell me what's the Park/Pickup's typical flow in the Asterisk. And how to set the sip.conf,

Does anyone know why the bt100 cannot park and pickup a parked call? attendant announces the call is parked at extension 701 but the call cannot be retrieved by any other phone. also, the bt100 constantly rings when the phone is hung up after parking. anyone experienced this? using the basic features.conf [general] parkext => 700 ; What ext. to dial to park parkpos =>

If you activate (via sip.cfg) the feature Group Call Pickup, its no surprise that asterisk doesn't know what to do with this feature request. But it is being sent as a SIP SUBSCRIBE request, and I'm wondering if, as asterisk stands, there is a way to take advantage of this feature to emulate the "*8#" normal behavior. If anyone has any input, there is also a call parking

If you activate (via sip.cfg) the feature Group Call Pickup, its no surprise that asterisk doesn't know what to do with this feature request. But it is being sent as a SIP SUBSCRIBE request, and I'm wondering if, as asterisk stands, there is a way to take advantage of this feature to emulate the "*8#" normal behavior. If anyone has any input, there is also a call parking

Hello All, I have a issue with park and pickup feature. I have asterisk 1.4.35 branch, Here is the scenario for the park and pickup. I have changed parking feature with *72 for my asterisk in features.conf. When i have inbound call it comes to one extension or ring group and then I put that inbound call in parking. After that I will dial some extension to get that call back, I am using

I'm working through my list of features people will expect, and Hold Pickup is at the top at the moment -- has anyone done any work on this? We've had some unpleasant experiences with call parking, and everyone seems to like the Hold Pickup model. If you don't know what I mean by Hold Pickup, it's sort of a reverse transfer; pick up the nearest phone and dial

I have been trying to figure out for quite a while now how to better setup asterisk in a small office environment.. For example, small offices usually want to be able to have shared lines, so one can put a line on hold and another person can pick that call up if it's on hold. The astra and snom phones have the ability to use parking spots, but asterisk doesn't seem to support them, as in

Nik Engel wrote: > Hi list ! > > I implemented *8 to pickup any call on my asterisk system. But after the > pickup callerid is missing, so there is no way to see from where the > call originated. How can this callerid be passed on. > > Nik > Hi Nik, I'm after the same question as I would like to keep callerID data after pickuping up the call. Maybe using a

Ok! Here is the question, Maybe someone can help. I have two * servers setup across a PTP DATA T1. They are communication with each other fine via IAX. Let's call one * server A and the other * server B. The question is If someone in * server A parks a call, then does a overhead page to people using * server B. How does the person in * server B pickup the call? and Can someone in *

These all work with sip native transfers and sip attended transfers in the example of "query" option. I tested this on my 7960 and it works great. Please others test it. cd /usr/src/asterisk cp contrib/scripts/astxs /usr/bin/ cd apps wget http://www.bkw.org/app_valetparking.c cd .. astxs -install apps/app_valetparking.c ; ; Lets Auto Park the person in the first available slot in

Ok, a little patch that adds a little functionality to call parking. With that, you can pickup the older parked call, if many are in the parking lot. The default exten to do that is 750, but can be changed by setting "parkpick => exten" on parking.conf , like [general] parkext => 800 ; What ext. to dial to park parkpos => 801-820 ; What extensions to

I'm trying to implement call parking with asterisk and Cisco SPA504G phones: features.conf parkext => 700 parkpos => 701-702 context => parkedcalls I defined one of the unused keys to park the calls: Key2: fnc=sd;ext=700 at 10.0.1.103;vid=1;nme=Park I also defined two other keys to pickup/unpark the calls: Key3: fnc=blf+sd+cp;sub=701 at 10.0.1.103 Key4: fnc=blf+sd+cp;sub=702 at

We are going to replace a BizFone with Asterisk and one of the features that I haven't been able to emulate is the PBX hold. We can put a call into hold with the * key and every 30 sec the phone gets a beep to remind us it is there and the caller on hold can hit # for other options. The closest I've come with Asterisk is call parking, and that doesn't quite do it. Using the

Hi Everyone, If I receive a call on a ZAP line and pickup the call and drag and drop it (by mouse) into a Parking Lot through FOP, it just hangs up. Is this feature supported by FOP? Thanks, Bruce -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100715/0bc10bd7/attachment.htm

i have TB instaled and i cant get call pickup when another phone rings i tried ** , *8 , *8# , **+ext but nothing seems to be ok.on extention menu i put call pickup=1 and call group=1 but nothing look at my features.conf; ; Sample Parking configuration ; [general] ; do not manually enter parkinglot config information, use the parkinglot module ; ; the parking_additional.inc file is

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is