similar to: Working Config for Polycom VVX and Auto Answer

Hi all, When moving from a self compiled Asterisk 13.23.1 to Asterisk 13.24.0, has resulted in a MWI clearing delay of around 5 minutes. After listening to a voicemail and deleting it, the Polycom VVX 601's MWI light is left on for around five minutes, before clearing. Installing Asterisk 13.24.1 did not fix this. Moving back to 13.23.1 allows the MWI to clear immediately. I see a note in

Hi, I've been meaning to fix my non-working paging feature here for a while, and I've just spent the last 5 hours looking at many, many web pages that all say the same thing. I am using Asterisk 1.6.2.18 and Polycom phones, both older (501 with "latest" legacy 3.1.7 firmware) and newer (335 and 650 with latest 3.3.1f). I have changed the correct values in sip.cfg like

On Mon, Mar 9, 2015 at 9:40 AM, David Wessell <david at ringfree.biz> wrote: > Welcome to our hell. > > We ran into this on VVX 300 and 400 phones running UCS 5.2.x. We finally > got Polycom to issue a hotfix firmware version. I'll be happy to share it > with you offlist, just email me. > > Officially Polycom will fix the issue in 5.3 in a few months.. > >

Everybody, I've had a request from my manager that I figure out how to get our Asterisk 13.x system using chan_sip to be able to display on the Polycom VVX series phone display (firmware 5.9.5), when an extension is called and the person on the other end is on the phone. He said, "Our old Analog phone system could do it, how hard can it be?" I've gone down the path of trying

Hi, I just moved many Polycom phones from firmware v3 to 4.0.1b. Anto-Answer simply stopped functioning. I can downgrade and make it work, upgrading kills it again. There obviously is a difference in how the newer firmware is treating this auto answer sip header. Can anybody tell me if they have Polycom firmware 4.x.x working with auto-answer/paging? Just so I know it's worth my time

Hi, Am running a freepbx install and created trunks, extensions and groups. Now I'd like to hand out the Asterisk phonebook to the phones (all VVX 310's). Is there an easy way to do this? Best, Stanley

Hi Guys, We are getting a strange issue on certain polycom phones, sometimes when a call comes in it just "flashes" to show there is a call but does not play any sound. This problem is very intermittent and happens to maybe 2 out of 10 calls. Has any else experienced this before? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Make all the static constant strings as char arrays, so they can be fully stored in read-only memory. --- align/scan.c | 2 +- builder/index-validate.c | 2 +- cat/cat.c | 2 +- cat/filesystems.c | 2 +- cat/log.c | 2 +- cat/ls.c | 2 +-

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

Hi, My phones stopped auto-answering when being paged, since I moved on to Polycom firmware 3.3.0 (3.3.1 is the same, I tried). That is with Asterisk 1.6.2.16. I looked at the wiki but nothing I try there works, even if I cut and paste the same setup. Any one has any idea of what I should change from my old 3.2.3 setup? My older phone (501) still using 3.1.6 still auto-answer

Hi, I am trying to write dial plan for sip to auto answer (auto attend) the incoming call to the sip phone. - If i call from sip1 to sip2 then sip2 should automatically answer the call and play some sound file. I am trying to do this but as new to the asterisk dial plan configuration , so not able Todo this. help me if anyone already done this setup. Regards Upendra. -------------- next part

I was trying to get my polycom phone to auto answer. I added this to the dialplan. Used a different phone to call "22" and the phone rang it did not auto answer. Did I miss something? exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0) exten => 22,n,SipAddHeader(Alert-Info: Ring Answer) exten => 22,n,Set(__SIPADDHEADER=Call-Info:\;answer-after=0) exten =>

Hi Rich: I just send a patch to request for your comments, then will do further work about this. things like this: [root at Allen ~]# virt-sysprep --ipconfig="eth0:192.168.1.2,255.255.255.0,192.168.1.1" --enable=ipconfig -d clone-6u1 OR [root at Allen ~]# virt-sysprep -d clone-6u1 Please comments. Thanks -Wanlong Gao Signed-off-by: Wanlong Gao <gaowanlong at cn.fujitsu.com>

Hi All, This may be an off topic but I'm not sure who else would know the answer. I'm playing around with Asterisk and Polycom phones. I see Polycom supports quite a few codec. The usual ones and these: G722 Siren14.24kbps Siren22.32kbps Siren14.32kbps Siren22.48kbps Siren14.48kbps Siren22.64kbps G7221.16kbps

On 2020-05-28 10:15, Doug Lytle wrote: > Everybody, > > I've had a request from my manager that I figure out how to get our Asterisk 13.x system using chan_sip to be able to display on the Polycom VVX series phone display (firmware 5.9.5), when an extension is called and the person on the other end is on the phone. > > He said, "Our old Analog phone system could do it,

I am a complete newbie, completed editing the extensions.conf file, having problem reloading my diaplan via asterisk console, tried to reload it with diaplan reload command, but it says command does not exist. Please help _________________________________________________________________ Hotmail: Powerful Free email with security by Microsoft.

How can I made a 3-way conference betwwen IAX channels? My current version is: 1.4.21.1 Thanx, Daniel Arohuanca Lagos +51 1 3594122 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080722/f9612f97/attachment.htm

Have someone running fine Alert-Info with a Snom 370 ( System Information: Phone Type: snom370-SIP MAC-Address: 0004132661BD IP-Address: 192.168.10.170 Firmware-Version: snom370-SIP 7.3.14 14961) i've tried exten => 200,1,SIPAddHeader(Alert-Info:<http://www.notused.com>\;info=alert-external) exten => 200,n,Dial(SIP/${EXTEN},30) Can see into the phone SIP trace is

We intend to use Asterisk with a very large dialplan (with a lot of functionality for 3000+ users). Each user will be able to change several of his parameters in the dialplan, so we will be forced to reload the diaplan constantly. Has anybody else any previous experience with a similar installation? There are some things that we'd like to know, if anybody can help us. These are: - Is

Hey, Could someone help figure out whats wrong with my config based on the debug below? What I am trying to achieve is to get email1 at example.com to read emails in the Public directory that is stored on /run/media/computer/Storage/Email/fastmail/Archive with the preface Public/Archive . The ACL has been set for anyone with permissions to lookup,read,write as shown below:- doveadm acl get -u