Displaying 20 results from an estimated 600 matches similar to: "Sending SMS with a Portech MV-374 GSM Gateway"
2009 Jan 16
1
Portech MV-378 with Asterisk
Has anyone been able to configure portech's mv-378 gateway with asterisk?
I did the configuration as per the manual but it does not work.
My server sees the portech gateway, but when the gateway is trying to
register to my server it fails. It says peer is not suppose to register.
The gateway and the asterisk box are on two different location (two network,
2 differrent IP address).
I would
2010 Apr 20
1
Portech MV-374 does not register
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
<font size="-1"><font face="Helvetica, Arial, sans-serif">Hello list,<br>
<br>
has anyone experience with the Portech MV-374 GSM-gateway ?<br>
<br>
I'm
2012 Oct 01
9
How to remove the call waiting tone without disabling callwaiting?
Hi,
The call waiting tone is very annoying (you hear nothing while it plays
the beep). I need callwaiting because of the queues (the phone has to
ring as soon as you hangup) but I want to remove the beep on my dahdi
channels, how can I do?
Thanks,
Niccol?
--
http://www.linuxsystems.it
2008 Nov 20
1
Sending / Receiving sms messages with Portech 370
Managed to get the portech 370 up and running with asterisk (even got
the callerid working!), but was wondering how (if) it is possible to
send / receive sms messages through the device . All I could find
googling was people asking how ;(
Does anyone have sms working with this device ?
Julian
______________________________________________________________________
This email has been scanned
2012 Oct 09
2
Asterisk sends wrong fxs 'Idle' hints
Hi,
I have a problem with asterisk 10.8, hints and fxs dahdi phones: if a
remote peer and an fxs phone gets connected and the remote peer hangsup,
then asterisk sends the "Idle" state to notify the watcher before you
hangup the fxs phone! Such a way if the user forgets to hangup the fxs
phone (which is a cordless for example) then the operators will keep
sending calls to him
2009 Nov 26
2
Problem with Portech MV-372
Hi,
I am experiencing a weird issue with my MV-372.
Mobile1 & Mobile2 are both registered to my asterisk server, I am able to
use them for outgoing call with no problem, but when I call the sims in my
gateway, they are routed to the right context/extension/priority, but as
soon as I hangup, the sim unregistered from asterisk and tries to register
with my the callerid of the last incoming
2009 Mar 09
2
Portech MV3770 & Caller-ID
Hi, I have a problem with Asterisk-1.4.22 (with TB 2.6.2) & Portech MV-370,
my problem is that when arrived an external call I don't view (on my
internal phone) the phone number but I have the number extension that is
configured on MV-370.
The MV-370 configuration is:
Mobile to Lan Table :
0 * 192.168.1.1
Lan to Mobile Table:
0 * #
SIP Setting:
Display Name: Portech
User Name: 1005
2008 Oct 21
0
Problem with Portech
Hi, I use Asterisk-1.2.26 (with Trixbox-2.1.12) and Portech MV-370 and my
problem is that when I try to call an external mobile phone via Portech I
have alway busy and in log file:
Called Portech/348xxxxxxx -- Got SIP response 486 "Busy Here" back from
192.168.1.2-- SIP/Portech-086e5ee0 is busy == Everyone is busy/congested at
this time (1:1/0/0) -- Executing
2010 Feb 08
6
GSM Gateway
Hello,
I am looking for a gsm gateway that is SIP based i.e no need of FXO/FXS
analogue connection.
I searched the email archives and found messages from 2008 but not sure
how accurate these are.
What do you use and how well it works ? The only sensible one I found
is one made by portech and one that is made by Eurodesign.
The one from portech is like a trunk while the one from eurodesign
2011 Apr 27
2
Fwd: Re: xen-qemu-dm does not build with backported xen-4.1
Il 27/04/2011 14:37, Ian Campbell ha scritto:
> Which specific revision of qemu-xen-4.1 are you using?
I'm using a tarball from
http://bits.xensource.com/oss-xen/release/4.1.0/xen-4.1.0.tar.gz
It seems Thomas used the tools/ioemu-qemu-xen subdirectory as source for
xen-qemu-dm. At a first glance I didn't notice
debian/mypatches/add-rules.patch: it adds Rules.mk from the tools
2009 Oct 17
4
how to limit the calls leaving a queue?
Hi,
I explain what I want to do..
All the operators share their phones. The number of the operator isn't
constant, so it's possible that two operators share all the phones.
They need to move all around, so they pick up the first phone they find.
If there are only few operator is very annoying for them to ear the
other phones ringing while they are at the phone!
So I'dd like to limit
2008 Nov 06
0
Asterisk trunking
Hello !
I am experiencing some problems with Asterisk trunking, this is the scenario:
There are 3 servers, a DID server provider (VOIP provider) which
delegates us a bunch of DID numbers to our asterisk server number one
(I will call it AA), from which I route the calls to Asterisk server
number 2 (I will call it BB), which then terminate on phone handsets.
The trouble is, that I probably
2011 Apr 18
3
No Internet, no asterisk
Hi,
this is an old outstanding problem, unfortunately I don't remember how
to walkaround it. I use asterisk 1.8.3 and I have a public IP in my
network interface. As soon as the Internet connection goes down, phones
stop working. I want to be able to use pstn, isdn and the gsm gateway
even if the Internet connection goes down, how can I achieve it?
Thank you,
Darkbasic
2022 Jun 18
1
Riello Vision VST 1100 + NetMan 204 network card
I've contacted Riello and they told me that the NetMan 204 is the new
version of the Netman Plus 102 and is indeed compatible with NUT.
I don't know how to update the Hardware compatibility list page, but the
204 should be added to the compatible ones.
Niccolo'
Il 2022-06-17 12:02 Niccol? Belli via Nut-upsuser ha scritto:
> Hi,
> I'm looking for a small 230V Line
2022 Jun 18
1
Riello Vision VST 1100 + NetMan 204 network card
I've contacted Riello and they told me that the NetMan 204 is the new
version of the Netman Plus 102 and is indeed compatible with NUT.
I don't know how to update the Hardware compatibility list page, but the
204 should be added to the compatible ones.
Niccolo'
Il 2022-06-17 12:02 Niccol? Belli via Nut-upsuser ha scritto:
> Hi,
> I'm looking for a small 230V Line
2008 Oct 01
3
GSM / 3g channel bank
More than 60% of our outbound calls are now to mobiles, so the time has
come to whack in a gsm channel bank.
Does anyone have any preference of bank ? Do you use a PRI or VOIP
connection from the bank to asterisk ? Real-world experiences are sooooo
much better than marketing blurb ;)
We currently have a TE412P with a free socket, so we have a choice
either way. I am looking for up to 30
2013 Jul 21
2
Fwd: Re: Asterisk T.38 Pass-Through doesn't work
Hi!
I have exactly the same problem on asterisk 1.8.22.0 and also on separate
11.2.1 when sending fax to PSTN.
Tryed with spa-3102, spa-2102, Patton Smartnode 4634, and Zoiper softphone.
SpanDsp also works without any problem on my box.
As I remember it was a bug in 1.8.1.x that the a=T38MaxBitRate paramater
was sent as "maxBitRate". Without capital "M".
Are you closer to
2010 Nov 22
3
Bug#591456: xen-utils-common: The script hotplugpath.sh is missing in /etc/xen/scripts
Is there a fix for this in the works/coming for squeeze or do I have to
patch the package myself? If so, how?
Thanks, a grateful Debian user that hasn't patched packages yet!
Steve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/pkg-xen-devel/attachments/20101122/8433308c/attachment.htm>
2008 Nov 29
1
GSM gateways - which one ?
I've been asked to purchase a gsm gateway for use with our asterisk
server (for our use, not reselling)
I have a spare ISDN port on the server, so I have use either a PRI or
VOIP gsm gateway.
What would people recommend ? Has anyone used the QuesCom 400 ?
I would also love to know a rough idea of cost ;)
Once I've gotten the info, I'll post a message on the biz list for a
2009 Jan 13
5
If...while...or what else??
Dear R users,I come to you with a quite silly question I think, but I hope
you can answer me...
That is, I've got some problems in using the if and while conditions in a
loop.
Substantially, I want to select rows in a dataset depending on an index
variable (suppose it ranges from 1 to 5), so to make a specific analysis
(homemade of course) on thie new dataset. Mi first tought has been to do a