similar to: Dahdi gains

Hi, I have the following setup: Ubuntu 12.04.02 LTS (64 bit) Asterisk 11.2.1 Sangoma 4-Port-Card (A104d) with firmware 43 (german e1-ports connected) WANPIPE Release: 3.5.28 DAHDI Version: 2.6.1 Echo Canceller: HWEC libpri version: 1.4.12 I call via sip into the dialplan. Then I do a "Dial(DAHDI/g1/voicenumber,r)". The call is bridged and everything is fine. "dahdi show

Hello, I am looking for a replacement for my Thomson ST2030SIP. My specifications are as follows : - 2 lines. - 6 BLF keys. - PoE. Can you give me a return on the models you use ? Thanks. Sil

Hi All, I am looking for a way to troubleshoot issues with TDM (E1) trunks with a provider. Currently with SIP trunks I am using tcpdump to perform packet captures between our gateways and the SIP providers IPs, capturing traffic on all ports, to include both the SIP messages and the RTP stream. How can I achieve a similar result on TDM links connected to TDM cards in Asterisk servers, where by

I am using the standard phonetic font "Doulos SIL" in a graph (http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=DoulosSILfont) This is an example: windowsFonts(IPA="TT Doulos SIL") barplot(c(1,2,3,4,5),names=c("\u{0251}","\u{0252}","\u{0253}","\u{0254}","\u{0255}"),family="IPA") However, I am unable

Hi, On one of our servers, we're having problems with incoming faxes. The connections come in through a PRI into a Digium TE820 card. 'fax show stats' yields the following: FAX Statistics: --------------- Current Sessions : 0 Reserved Sessions : 0 Transmit Attempts : 0 Receive Attempts : 740 Completed FAXes : 740 Failed FAXes : 486 Spandsp G.711

Hello. I am trying to write an R function to plot the survival function (and associated hazard and density) for a Siler competing hazards model. This model is similar to the Gompertz-Makeham, with the addition of a juvenile component that includes two parameters---one that describes the initial infant mortality rate, and a negative exponential that describes typical mortality decline over the

On Thu, Nov 29, 2018 at 09:46:16AM +0100, Andrzej Hajda wrote: > Quite late, hopefully not too late. > > > On 21.11.2018 12:51, Ville Syrjälä wrote: > > On Wed, Nov 21, 2018 at 01:40:43PM +0200, Jani Nikula wrote: > >> > >>> return; > >>> diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c >

Hallo Sebastian, >>>>> "SP" == Sebastian P?lsterl <sebp at k-d-w.org> >>>>> on Sun, 14 Jun 2009 14:04:52 +0200 writes: SP> Hello Martin, SP> I plotting the silhouette of a clustering and storing it as png. When I SP> try to store the image as png the bars are missing. The bars are plotted SP> when I use x11 or

Hi Last week I had a lengthy thread in which someone indicated the my SIL card is a FRAID (don't know if F stands for the F word or Fake, though it doesn't really matter). I want to replace the controller with a controller that Linux will see the RAID1 group as a single HD and not multiple HDs as it happens with the SIL controller. Recommendations anyone? -- TIA Paolo --------------

On Wed, Nov 21, 2018 at 01:40:43PM +0200, Jani Nikula wrote: > On Tue, 20 Nov 2018, Ville Syrjala <ville.syrjala at linux.intel.com> wrote: > > From: Ville Syrjälä <ville.syrjala at linux.intel.com> > > > > Make life easier for drivers by simply passing the connector > > to drm_hdmi_avi_infoframe_from_display_mode() and > >

Hello, i?ve a problem i dont find the reason for. An incoming call coming over iax is connected to a Sip phone. Until the phone picks up the call i could hear moh without problems. Then the phone sets the call on hold and opens another call to another extension. The incoming call hears the Hold music and also the call to the other extension hears another moh. Everything works so far as it

On Tue, Dec 04, 2018 at 08:03:53AM +0100, Andrzej Hajda wrote: > On 03.12.2018 22:48, Ville Syrjälä wrote: > > On Thu, Nov 29, 2018 at 09:46:16AM +0100, Andrzej Hajda wrote: > >> Quite late, hopefully not too late. > >> > >> > >> On 21.11.2018 12:51, Ville Syrjälä wrote: > >>> On Wed, Nov 21, 2018 at 01:40:43PM +0200, Jani Nikula wrote: >

Since the getelementptrs were implicitly generated by the CreateStore/Load I'm not sure how to get access to them. So I hacked the assignment to be done thrice: once using a manual decomposition into two GEPs and stores, once using the "big" CreateStore, once via the setGlobal function, printing addresses and memory contents at each point to the degree that I have access to them.

I decided to replace Suse 10.1 with Centos 5.0 on my file server. Im getting stuck right after I select the keyboard layout. I get the following message on the console: /dev/sdb: "sil" and "pdc" formats discovered ( using pdc)! and it just hangs there. I think sil and pdc are referring to the onboard raid chips that the drive was attached to. This drive was used in

I have a one problem with Raid controller Tekram TR-822... I'm using dmraid software: root at ns1: / $ dmraid -r /dev/sda: sil, "sil_ajacddafagff", mirror, ok, 156299440 sectors, data@ 0 /dev/sdb: sil, "sil_ajacddafagff", mirror, ok, 156299440 sectors, data@ 0 When I'm start dmraid -ay: root at ns1: / $ dmraid -ay RAID set "sil_ajacddafagff" was not activated

hello, can anybody help me with folloving problem I have asterisk with the public IP and two UAs (snom100, x-lite) in the same private network behind the same FW/NAT. All is working good, but whan I tried to establish call between these two UAs, first 10-15 second is nothing to hear and then is the quality terrible :( Can anyone tell how to get it work with normal quality ? best regards

Hi, How do I setup multiple password protected iSCSI targets on Linux? I know that mounting a password protected iSCSI target requires modify these records with the appropriate values: node.session.auth.username = My_ISCSI_USR_NAME node.session.auth.password = MyPassword discovery.sendtargets.auth.username = My_ISCSI_USR_NAME discovery.sendtargets.auth.password = MyPassword But, now I need

Mandi! Matt Savin via samba In chel di` si favelave... A bit OT but... > Following lines in dhcpd.conf should get rid of duplicates and preserve > load balance with '128': > one-lease-per-client true; > deny duplicates; > ignore-client-uids true; Interesting. But whan happen if a client have a double wired/wireless network connection, and

Hi, In my discpipline, it is common to plot one acoustic property on a positive scale but from top to bottom on the ordinate and the same for another measurement on the abscissa. So, the origin of the plot is on the top right of the plot, with increasing values to the left /down. This is to highlight the correlation between the acoustic measurement and the position of the forming structure, for

Hello, I have a problem with one of three [topic] phones. The phone, which is on the LAN in the same subnet as Asterisk, keeps unregistering from the Asterisk server. Whan it is unregistered there is no way to make a phone call from it, but once it is rang by any other of the phones it registers to Asterisk again. The other two are absolutely fine. The problematic one [ecco] puts this messages