similar to: Re bug 0006319

I setup a CentOS 6 server to use with KVM/QEMU, and I am getting the following error a good bit, granted it doesn't seem to be causing any trouble. I figured I would post and see if anyone has any ideas on the issue, or if I can just dismiss it. If I look at my logging/dmesg, I see: do_IRQ: 19.217 No irq handler for vector (irq -1) do_IRQ: 3.178 No irq handler for vector (irq -1) do_IRQ:

John R Pierce wrote: > On 10/7/2015 1:30 PM, m.roth at 5-cent.us wrote: >> No. I'm the one who got the quote and set up the order for my managers, >> and I know what it's got: the ethernet connection is to the internal >> webserver to manage the RAID. the 712S I have is dual-path SAS for data. > > then yeah, you'll need a plain SAS2 external HBA card. If

Hi, folks, Since I've gotten a total of one response in days on the HP forum, maybe the collective mind here has an answer.... As I've mentioned in other posts, we have an HP dl580 g5 that started throwing ECC errors. But wait, it's worse: memory is mirrored.... And the thing is fully populated with 32 DIMMs. I took my best guess, pulled the matching set of DIMMs, and took two

Hey, folks, I've got an HP Proliant DL580 G5 throwing ECC errors. This is annoying, since a) it's all new as of a few months ago, and b) it's *fully* populated. The two things I need to figure out are a) *which* DIMM it is, and b) is it mirrored; if so, which *other* DIMM needs to come out until we get replacements from the OEM. Here's one of many, all identical, from dmesg:

Running CentOS 6.7, on an older HP DL580 G5. We've got a Dell 12-bay RAID box plugged into a PERC H800 (aka LSI Liberator) that we put in the HP, and that works fine. We've got a new RAID (a JetStor), and are trying to plug it in. The layout is that the Dell RAID is dual-pathed DAS. Each PERC has two DAS ports. We've got the Dell RAID in the top port of each PERC. I *thought* I could

John R Pierce wrote: > On 10/7/2015 8:42 AM, m.roth at 5-cent.us wrote: >> Got an old HP box with a P800 Smart Array controller. The HP RAID >> box >> plugged into it's failing, and we got a new JetStor... > > I think the FIRST thing you need to determine, WHAT JetStor do you have, > and what is its host connection ? All the JetStor boxes I saw in a >

If this were a Dell RAID, I could use megaraid while the system's running. Does anyone know what I need to use to manage the HP "amart array" RAID? I've got an orange light on a drive, and can't find, googling, whether I can just pull the drive, or if I have to separate it from the RAID, or.... And can't bring the system down to use the firmware interface, not without

Hi all, Our kernel is 2.6.32-358.14.1.x86_64, recently dozens of them panicked, since it's been OK for a long time and the problem emerged all of a sudden, I'm not sure if an upgrade caused this problem. Here's what I got from backtracing: PID: 8136 TASK: ffff8803341aead0 CPU: 2 COMMAND: "" #0 [ffff880028283610] panic at ffffffff815286b8 #1 [ffff880028283690]

(I accidently (cross) posted this also in the xen-bugs mailing list. This wasn''t my intention. Sorry for that) Hi, I have two kernels vmlinuz-2.6.32-5-amd64 vmlinuz-2.6.32-5-xen-amd64 As you can see, distributions are the same, the latter differs by loading xen stuff. When booting the xen kernel (vmlinuz-2.6.32-5-xen-amd64) I noticed a problem which does not occur in the non

hi,everybody There is a function do_IRQ() in file xen/arch/x86/irq.c, but where does do_IRQ() be called please? Thanks! _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

I attempted an upgrade of our production system from Asterisk/Zaptel 1.2 to 1.4 this weekend. Intially everything looked like it was working properly, but some time in the day following the upgrade, the system died to a kernel panic. I wasn't able to catch the entire kernel dump on the console unfortunately. I attempted to isolate the panic, and found that when 'service zaptel stop'

I hope this EIP can enlightend the developers: Jun 10 10:28:59 shawarma kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000019 Jun 10 10:28:59 shawarma kernel: printing eip: Jun 10 10:28:59 shawarma kernel: c0181d47 Jun 10 10:28:59 shawarma kernel: *pde = 00000000 Jun 10 10:28:59 shawarma kernel: Oops: 0000 [#1] Jun 10 10:28:59 shawarma kernel: Modules linked in:

Got a bunch of servers from Penguin. Supermicro m/b's H8QG6. We put a 3tb drive in for additional workspace for the users, and some of them won't read, others will go for weeks, then spit out DRDY errors. lshw shows the controller as an ATI SB7x0/SB8x0/SB9x0 SATA. I did notice that it shows *-storage description: SATA controller product: SB7x0/SB8x0/SB9x0 SATA

The hpacucli works... but what isn't clear to me, even with googling, is whether I have to do something from the utility, or whether I can just pull the failed drive out of the hot-swap bay and put another in. I *do* see that I have to re-enable the drive, or rescan it, but right now, I'm concerned about just pulling the dead one out. mark

Hi, I am using Dovecot 2.2.18 ?and have migrated from a 1.x versions. After this migration I had several errors and obsolete errors in logs. I fixed them and after all that I finally was able to run postfix and dovecot again. The problem I have facing right now is that in the mail logs and in the dovecot logs. I am getting auth errors. In mail log the postfix is spitting out: "?fatal: no SASL

I asked here a week or so ago, and referenced an older bug, but haven't seen any comments. Googling, I see others asking about the same. Datum: *every* one I've found is like this: they're all HP DL580's or DL380's, or such. This is being used for heavy-duty scientific computing. Does anyone know if it *will* it seriously affect throughput speed if I turn off irqbalance?

Hi all, my name is Hirofumi Tsujimura. We are porting and testing a PV-on-HVM in the IPF. This is a first time to send mail. I probably found the problem when I tested the VNIF. My operation for the test is following. 1. create a domain VTx and attach the VNIF in it. 2. create a domain U. 3. send a packet to the domain VTx from the domain U with ping command. Then, the domain VTx

My log says suddenly: Dec 14 02:35:16 hp1 kernel: [1492482.232822] o2net: no longer connected to node hp2 (num 1) at 192.168.1.2:7777 Dec 14 02:35:18 hp1 kernel: [1492483.960150] BUG: soft lockup - CPU#1 stuck for 61s! [kvm:32398] I have no idea what happens here and why - but the result are a lot of problems with virtual machines. Viele Gr??e Andreas Rittershofer -- Hier k?nnte keine

Anyone working with/using it? One thing that's driving me nuts is that it keeps spitting garbage into the logs (card absent or mute!!!). I just tried editing /etc/init.d/pcscd - there's *no* way to pass parms from the config file - and set the logging level to --error, and it's still doing it. Clues for the poor, to shut it up? mark

When I came into work this morning the console had the following: bio_endio __end_that_request_first scsi_end_request scsi_io_completion scsi_finish_command scsi_softirq __do_softirq do_softirg do_irq command_interrupt default_idle cpu_idle start_kernel Panic I am running software RAID-1 on this machine. I had 2 IDE disks and the machine when down once in a while with similiar messages. I