similar to: flashboot on Soekris 4826

Hey there, this is my first mail to a list ever so just excuse any format or human errors. Im running the 5.2 Release with a self compiled Kernel from your PCENGINES file on a Alix2D3 board. Im reviving my old flashboot release 4.4 setup wich i used to connect 18 branch-offices to their HQ. Worked like a charm btw, big thanks to your project! first i had to do some adjustments, dont know if

Peter, First, I'm not a programmer and I don't have Linux. The reason I am emailing you is that I spend the two weeks looking over your site and other trying to figure out " HOW to create an ISOLinux image or convert my existing ISO image to and ISOLinux image. I have some software called" Flashboot" that can take and ISOLinux image and can create a bootable Flash drive of

Hello Everyone, I am having trouble with booting a soekris 4826 board.after setting up my tftp,dhcp and web servers ,I log into the board using minicom and type boot f0,which doesn't quite work out. > boot f0 NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 Copyright (C) 2002, 2003 National Semiconductor Corporation All rights reserved. Pre-boot eXecution Environment PXE-2.0 (build 082)

Hi All, I am still having troubling with PXE. Thanks for replying Shao.I did follow ur suggestions and my results have improved a bit.From Ethereal and TCPdump, I can see that the client sucessfully dowloads the file pxelinux.0 from the server but stops at this point. here is the output of tcpdump tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 11:05:41.966864 IP

Hi All, I have a Soekris 4801 running Asterisk and I tried to add a X100P FXO card only to find that the Soekris will not boot with the card installed. The LEDs flash for a second and then nothing, it does not boot. I've tried 2 different X100p cards, both of which work in a regular desktop system, and still have no luck. I tried a different Soekris 4801 with no luck. I've also tried a

Hello, Recently I have discovered a problem with serial console output when net-booting a Soekris net5501 board via pxe. When using pxelinux.0 from syslinux 4.04 package I get only 15 characters from the output, then the carriage returns back to the same line over and over again, making it impossible to read the output. What is more the booting process (trying configuration files with

Hi group, i'm brand new and i would like to ask about soekris hardware. I read along the web but i have some doubts that i think can be solved here. My question are the following: 1) does the Digium TDM400P fit in the soekris box with a 4801 SBC or a bigger box is needed? Any suggestions about where to pick up another box? 2) does the Digium TDM100P (already discontinued) fits fine in a

Hi. I am trying to use EXTLINUX 3.08 to boot a Soekris net4801 from a CompaqFlash card. BIOS reports the CF card as the first master harddisk. During boot/load the loader hangs after this output: EXTLINUX 3.08 2005-05-19 PXELINUX and LILO works fine on the same setup It this a general problem with Soekris/net4801 and EXTLINUX? Regards Johan Linn?r

On 06/10/2014 11:41 AM, Thomas Quinot wrote: > Dear all, > > I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 > (comBIOS 1.33). This combination appears to not work out of the box... > > I see much advice floating around from a few years ago, hinting that > earlier versions of PXELINUX might have worked. However before resorting > to archaeology

Hi, I am still struggling with the E1 card!!!! Does anyone has some experience with sangoma E1 card? I have this card in soekris net 4801. First I was runnig it with deactivated DMA and I was receiving overruns (even with no channels in use). Then I enabled the DMA. Now I have the overruns only during a call. When I'm using more than one channel, the voice is stuttering and the delay is very

Dear all, I'm trying to boot a recent PXELINUX on a brand new Soekris net4501 (comBIOS 1.33). This combination appears to not work out of the box... I see much advice floating around from a few years ago, hinting that earlier versions of PXELINUX might have worked. However before resorting to archaeology I'd be interested in feedback from others who might have got through this. I

Hi, Wich mini Linux distribution do you recommend? My idea is to use Shorewall in a Soekris mother, with some mini Linux installed. Thanks and Best regards, Andrés

We found at the wiki a link to soekris and wonder if it is good? Is anybody using it and can share some experience, please? We would like to use it as a small PBX including a wireless access point, so that we can also use WiFi phones. bye Ronald

Hello, Freebsd-stable. I installed 7.1-STABLE on my new Soekris net5501. Kernel config is in attach. This unit lock up in strange way every day. It is pingable, but no access to host on any network protocol (sshd, named, etc are not answering), and serial console (only one this unit has) DOESN'T ANSWER too! Only way to un-freeze it is cold reboot. I've thought, it is

I thought I saw a Soekris embedded in the Digium booth photos, can you run Asterisk on one of these? How? I'd be interested in it for a back pbx, given the reliability. In fact, might want to move my home pbx to this also. Chris Mason

I'm working with a Soekris net45xx SBC and I'm experiencing problems using any syslinux code (syslinux, pxelinux, extlinux) above version 2.20. I'm interfacing with the Soekris via the serial console port, which is the primary bios console. I've tried different configurations with setting serial in the config file, but no change (though I dont even thing it's getting to reading

* H. Peter Anvin, 2014-06-10 : > You probably want to test both pxelinux.0 and lpxelinux.0... if it is > sticking in pxe_init_isr you're using the latter. Correct. And indeed pxelinux.0 goes much further than lpxelinux.0! I have a few issues yet to fix: * Undef symbol FAIL: __syslinux_debug_enabled (I must have done something wrong while building) * find proper fix for

Hi, I'm having an issue with a soekris net4801 board and a S101i "IAXy" device. When I connect a successfully provisioned IAXy directly via a crossover cable into an ethernet port of the soekris, the link led turns on orange so i'ts 10Mb and the activity led blinks like if there is some action going on but when I try 'tcpdump -nettti sis1' I see nothing going on, no

Hi all, I have a Soekris net4801-50 board with OpenBSD 3.9 where I've configured a dhcp server and tested it with a regular PC connected directly via a crossover cable with success. The problem comes when I try to connect my IAXy device instead of the PC. I can see with 'tcpdump -nettti sis1' that the IAXy isn't sending any packets to the dhcp server. I thought my IAXy was bad

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box