similar to: Booting

> Hi All, > First post and hopefully someone can steer me in > the right direction for this problem. I did a bit > of googling and found some hints but nothing concrete. > > We are using Syslinux and a FAT32 USB thumb drive > (single partition) to boot a customized Debian OS > which works very well with newer motherboards. > However we have a few older Dell

Has any advancement been made to get 3102 operational in either a SIP or H323 asterisk environment. A post back in time mentioned a downloader service. >From the posts and articles I have read, the NCP is acting like a bootp and tftp server which uploads the configuration to the phone?? Am I close? if so, where does one get the SIP image for he 3102 and 2102 phones? I had 8 donated, but they

> Hi, > > Didier Spaier wrote: > > The issue is the inability of booting of a *physical* (not virtual) optical > > media, like for instance a DVD or a CD, using syslinux.efi. > > Actually firmware cannot find any UEFI specified booting starting points > in an ISO 9660 filesystem that was created with mkisofs -b and > -hard-disk-boot, but without a boot image

Hi All I have been looking around and haven not been able to find a working example I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri 1.4.10.2 I use a sangoma A200 card so I am using wanpipe 3.4.7 If I use zaptel which I read I need for app_rxfax then asterisk crashes with segfaults on startup asterisk[2624]: segfault at 30353466 ip b7eb538b sp bffda26c error 4 in

I downloaded DOS6.22 image from putergeek.com. Used fdisk from that floppy and format from that floppy. Still no luck. If I execute fdisk under leaf (monkeynoodle.org) as fdisk/dev/hdc, and give p for print partition table, I get the following: Disk /dev/hdc: 16 heads, 32 sectors, 123 cylinders. Units = cylinders of 512 * 512 bytes Device Boot Start End Blocks Id System /dev/hdc1

Latest syslinux 2.00 stable version from freshmeat. Are the programs that will just copy boot sectors or create boot sectors for /dev/hda1, /dev/hda2 etc.. that I can simply copy with a dd command? Mohan -----Original Message----- From: leaf-user-admin at lists.sourceforge.net [mailto:leaf-user-admin at lists.sourceforge.net]On Behalf Of Luis.F.Correia Sent: 05 November 2002 15:01 To: leaf-user

_ Vbox 4.2.18 VM booted with FreeDOS floppy, kernel 2041, no config.sys, no autoexec.bat, no TSR's, no memory managers. _ The booting floppy includes syslinux.com 6.02. _ Two HDD images attached to the VM, MBR + 1 FAT16 formatted partition each. Executing syslinux.com -i c: (or "d:") results in the following error: "Invalid Opcode at AD04 5080 0206 5080 2021 3666 FFFD 0083

-----Original Message----- From: S Mohan [mailto:smohan at vsnl.com] Sent: 05 November 2002 16:13 To: Luis.F.Correia; leaf-user at lists.sourceforge.net Subject: RE: [leaf-user] (no subject) I know that is the proper way. Unfortunately, I'm stuck and am mad at myself for that. Error message: ERROR 440D: Unable to lock drive for exclusive access - when I use syslinux 2.00 from freshmeat.

While playing with some less than usual configurations, I've got bitten few times by geometry settings in case of, usually, microsoft[ish] systems. First two examples, then the improvement idea. Example #1 My usb stick has zip-compatible geometry, which should work fine both in hdd and zip modes. It usually does, at least as far as syslinux and normal software is considered - excluding

Hi All, First post and hopefully someone can steer me in the right direction for this problem. I did a bit of googling and found some hints but nothing concrete. We are using Syslinux and a FAT32 USB thumb drive (single partition) to boot a customized Debian OS which works very well with newer motherboards. However we have a few older Dell machines that simply hangs when trying to boot

I am not sure where to begin to look into how to solve this problem. I've setup a samba 3.0.0 Fileserver moved all of my users files over to it, works great thanks developers=). I've encountered a few documented problems such as the Excel saving over another file thing(already been patched I belive). And a few I can't find anything on. One specifically is causing me some grief. We

I'm home at last. I did a mixture of things. I downloaded DOS6.22 floppy from putergeeks.com, extracted my old syslinux 1.75 (dos version) into the same boot floppy and made my CF /dev/hda1 as suggested by Luis (Hail O King - my saviour). Lo and behold it went thro' like a hot knife thro' butter. syslinux did not complain at all. I did an xcopy /s of my D: (hard disk) to my C:(CF) and

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Could someone possibly clarify the relationship between these 2 programs? I am in a situation where I am developing for an embedded system, and I need to rewrite my CMOS before I actually boot into linux. ~ The only tools for manipulating my cmos happen to be DOS utilities, and I was hoping that I could script their use in autoexec.bat or somewhere

Hi, My computer has only primaly IDE but not secondaly. I connected a hard drive as Master and DVD-R as Slave on IDE. BIOS doesn't recognize IDE devices, but Windows XP that boots up from SATA hard drive can recognize DVD-R and can read files on the CentOS Installer Disk 1 of 4. Is it possible to start Centos4 Installer from WindowsXP? If possible, which file on Disk 1 should I click? Even

Hello syslinuxers I'm stuck with a scientific problem which gives me headaches: I have a laptop (Gateway MX3410) which has a SD memory card reader. Recently an interesting thought crossed my mind: why don't I setup a 2GB SD card as a harddrive and put some rescue tools on it. So I dug on the net and I came across the idea of using memdisk to boot floppy images without the need of a

Hi. We've been using PXELINUX for years, to kick off OS installations (floppy images) and booting assorted tools. The addition of ISO support in memdisk opened up some new alternatives that we also use, e.g. booting WinPE ISO images over PXE. Today I downloaded a BIOS for a HP EliteBook 8440p and discovered that the BIOS file is 3 MB. I could probably squeeze it onto a 2.88 MB floppy image

Hello, there is a "fdboot.img" floppy drive image included with FreeDOS ISO file. It's a floppy image file: root at debian64:~# file -s /home/martin/FreeDOS/isolinux/fdboot.img /home/martin/FreeDOS/isolinux/fdboot.img: x86 boot sector, FREE-DOS BEta 0.9 Bootloader KERNEL.SYS, code offset 0x40, OEM-ID "FreeDOS ", sectors/cluster 2, root entries 112, sectors 720 (volumes

Hi All I'm trying to get my Ultra UPS connected. It connects using a standard USB cable I have --with-drivers=hidups in the configure command and I have lsusb showing Bus 001 Device 002: ID 0d9f:0001 Powercom Co., Ltd Bus 001 Device 001: ID 0000:0000 I have /dev/usb/hiddev0 now matter what I try I keep getting upsdrvctl start Network UPS Tools - UPS driver controller 2.0.3 Can't

Hi All Curious will this work Std. PSTN line ---x------ X100p | ------ Fax Machine Using a standard "home phone" pstn line with a splitter connecting a fax machine and X100 Asterisk Box Incoming Line: Can I have in the dial Plan [incoming] exten => s,1,Wait(1) exten => s,2,IfFax continue to ring, so that the Fax Machine gets it exten

Hi Maarten, Yes, I'm behind ADSL with PPPoE but I don't think it is related with my case. When my client disconnects from IceCast server for 15-20 seconds, my active downloads are not interrupted. It currently effects only the route to my IceCast server, other routes looks uneffected. I'm pinging IceCast server continuously and checking trace route periodically. It is comething like: