Hi All I have been looking around and haven not been able to find a working example I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri 1.4.10.2 I use a sangoma A200 card so I am using wanpipe 3.4.7 If I use zaptel which I read I need for app_rxfax then asterisk crashes with segfaults on startup asterisk[2624]: segfault at 30353466 ip b7eb538b sp bffda26c error 4 in libc-2.7.so[b7e3f000+155000] asterisk[2647]: segfault at 30353466 ip b7e6338b sp bfb7708c error 4 in libc-2.7.so[b7ded000+155000] asterisk[2666]: segfault at 30353466 ip b7dfe38b sp bfa6e4ec error 4 in libc-2.7.so[b7ded000+155000] When I use dahdi at least asterisk will start but app_rxfax will fail with unknown symbol in ast_register_application I could only find a precompiled-linux-spandsp-app-fax is there anyway to get the source and compile for myself? Where I can compile for dahdi and not zaptel. Or can someone explain why the segfaulting?? my machine O/S is: Debian kernel : 2.6.26-2-686 i686 My goal is to connect a fax machine to the the sangoma card so I can send paper based faxes. I have a teliax provided SIP phone number which will be the fax number to receive all faxes and have them emailed to a central email address, hopefully in PDF format. where they can be printed and/or forwarded. It would be nice to have the incoming fax emailed to a specific address based on either subject or senders phone number. If this is possible I would like to know how. Thanks in advance Barry
Barry Fawthrop wrote:> I have been looking around and haven not been able to find a working example > I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri 1.4.10.2 > > I use a sangoma A200 card so I am using wanpipe 3.4.7 > If I use zaptel which I read I need for app_rxfax then asterisk crashes with segfaults on startup > > asterisk[2624]: segfault at 30353466 ip b7eb538b sp bffda26c error 4 in libc-2.7.so[b7e3f000+155000] > asterisk[2647]: segfault at 30353466 ip b7e6338b sp bfb7708c error 4 in libc-2.7.so[b7ded000+155000] > asterisk[2666]: segfault at 30353466 ip b7dfe38b sp bfa6e4ec error 4 in libc-2.7.so[b7ded000+155000]If you are using Asterisk 1.6.2.0 you don't need app_rxfax; Asterisk 1.6.2.0 includes app_fax as a standard application. -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA skype: kpfleming | jabber: kpfleming at digium.com Check us out at www.digium.com & www.asterisk.org
----- "Barry Fawthrop" <barry at isscp.com> wrote:> I have a teliax provided SIP phone number which will be the fax number > to receive all faxes > and have them emailed to a central email address, hopefully in PDF > format. where they can > be printed and/or forwarded. >Faxing over VoIP is not likely to work. Google 'fax over voip' or better yet, have a look at this: http://www.soft-switch.org/foip.html Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105
I'm using hylafax/aixmodem for a fax solution. If your SIP DID provider has a T.38 path to you, faxing should be pretty reliable. I'm on * 1.4 and I'm not too familiar with current fax offerings in 1.6. Hylafax can be configured to email incoming faxes as a PDF, or to accept outbound faxes from a print driver on your client machines Chris Hillman ???????????????????????????????? Systems Administrator Clearwater Research, Inc. chillman at clearwater-research.com -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Barry Fawthrop Sent: Wednesday, December 23, 2009 7:33 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] Asterisk and Faxing Hi All I have been looking around and haven not been able to find a working example I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri 1.4.10.2 I use a sangoma A200 card so I am using wanpipe 3.4.7 If I use zaptel which I read I need for app_rxfax then asterisk crashes with segfaults on startup asterisk[2624]: segfault at 30353466 ip b7eb538b sp bffda26c error 4 in libc-2.7.so[b7e3f000+155000] asterisk[2647]: segfault at 30353466 ip b7e6338b sp bfb7708c error 4 in libc-2.7.so[b7ded000+155000] asterisk[2666]: segfault at 30353466 ip b7dfe38b sp bfa6e4ec error 4 in libc-2.7.so[b7ded000+155000] When I use dahdi at least asterisk will start but app_rxfax will fail with unknown symbol in ast_register_application I could only find a precompiled-linux-spandsp-app-fax is there anyway to get the source and compile for myself? Where I can compile for dahdi and not zaptel. Or can someone explain why the segfaulting?? my machine O/S is: Debian kernel : 2.6.26-2-686 i686 My goal is to connect a fax machine to the the sangoma card so I can send paper based faxes. I have a teliax provided SIP phone number which will be the fax number to receive all faxes and have them emailed to a central email address, hopefully in PDF format. where they can be printed and/or forwarded. It would be nice to have the incoming fax emailed to a specific address based on either subject or senders phone number. If this is possible I would like to know how. Thanks in advance Barry _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Barry Fawthrop wrote:> Hi All > > I have been looking around and haven not been able to find a working example > I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri 1.4.10.2 > > I use a sangoma A200 card so I am using wanpipe 3.4.7 > If I use zaptel which I read I need for app_rxfax then asterisk crashes with segfaults on startup > > asterisk[2624]: segfault at 30353466 ip b7eb538b sp bffda26c error 4 in libc-2.7.so[b7e3f000+155000] > asterisk[2647]: segfault at 30353466 ip b7e6338b sp bfb7708c error 4 in libc-2.7.so[b7ded000+155000] > asterisk[2666]: segfault at 30353466 ip b7dfe38b sp bfa6e4ec error 4 in libc-2.7.so[b7ded000+155000] > > When I use dahdi at least asterisk will start but app_rxfax will fail > with unknown symbol in ast_register_application > > I could only find a precompiled-linux-spandsp-app-fax is there anyway to get the source > and compile for myself? Where I can compile for dahdi and not zaptel. > Or can someone explain why the segfaulting?? > > > my machine O/S is: Debian kernel : 2.6.26-2-686 i686 > > My goal is to connect a fax machine to the the sangoma card so I can send > paper based faxes. > > I have a teliax provided SIP phone number which will be the fax number to receive all faxes > and have them emailed to a central email address, hopefully in PDF format. where they can > be printed and/or forwarded. > > It would be nice to have the incoming fax emailed to a specific address based on either > subject or senders phone number. If this is possible I would like to know how. > > > Thanks in advance > > Barry >Looking at SIP debug of an incoming fax call I see v=0 o=root 2007366114 2007366115 IN IP4 24.xx.xx.xx s=Asterisk PBX 1.6.2.0 c=IN IP4 24.xx.xx.xx t=0 0 m=image 4308 udptl t38 a=T38FaxVersion:0 a=T38MaxBitRate:9600 a=T38FaxFillBitRemoval a=T38FaxTranscodingMMR a=T38FaxTranscodingJBIG a=T38FaxRateManagement:transferredTCF a=T38FaxMaxDatagram:1400 a=T38FaxUdpEC:t38UDPFEC Yes my udptl.conf file has udptlstart = 4000 udptlend = 4999 T38FaxUdpEC = t38UDPRedundancy T38FaxMaxDatagram = 400 VoipFaxMaxRate = 5 T38MaxBitRate = 14400 ;udptlchecksums=no udptlfecentries = 3 udptlfecspan = 3 use_even_ports = yes ;; tried both no and yes It would appear from the BitRate and UdpEC that my udptl.conf file is not being used? Or am I missing something?