similar to: hp dl585 - qlogic hba's - centos 4.5 x86_64

Hi, I got few servers (IBM HS20,HS21 blades, IBM xSeries 3650 & others) connected to a dual fabric san throught Qlogic HBA's (23xx, 24xx). Multipathing is done with device-mapper-multipath. On CentOS 4.x i can scan for new scsi devices without any problems, get them up with multipathing & use them without any problems. However, after i started installing CentOS 5.1 (did not

Hi Everyone I am looking at setting up a File Server that uses ISCSI storage. It is the first time I have done this, so I am wanting to get peoples thoughts on whether for CentOS systems you should use Hardware based ISCSI HBA's? If so do I need to be careful about what HBA I use ? Currently I am looking at purchasing a Dell System using Broadcom ethernet cards/ ISCSI HBA. From

Very strange behavior, been banging my head against the wall on this one too. It works fine on CentOS 4.6, the behavior is when the driver loads the bus is not scanned or at least the devices that are exported are not detected. (they are detected in the HBA bios no problem). If I issue the qlogic bus scan command it doesn't get anything back either. If I manually add the devices with

Hi OK another issue trying to get X going on these boxes. It seems to be a HP issue but if anyone knows a solution that would be great. I am using the iLo interface and the hpmouse-1.1.0-73.noarch.rpm driver. As root i can startx and all is well, however when starting X as the oracle user it fails with the following error Exec fail for command "/opt/hp/hpmouse/hpmouse-helper"

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Hi list, I have the choice to use RHEL4 or Centos4.x on a Dell PowerEdge2850 who is linked to an AX100 storage system. My question is: does the QLA200 (the pci fiber channel card) driver will work on CentOS 4.1 . For now the card is listed like this on CentOS 4.1: --- #lspci 09:04.0 Fibre Channel: QLogic Corp.: Unknown device 6312 (rev 03) --- What kind of modification must/can I do to the

I apologize in advance as this is not really at CentOS specific issue, but I don't know where else to turn. We are configuring some Dell 1850s for a customer, and they have all been configured with a QLogic dual channel HBA. But no storage has been (or will be in the near future) attached to these HBAs. During the boot process (both for the kickstart and after the OS has been

Hi all- Usually i call out on this list for help on the CentOS matters but today I am fishing around trying to find an active forum for Solaris. It's hard to match the community here but I'd like to find the Solaris list where the most people are. Just having trouble configuring multipathing on QLogic iSCSI HBA's on Sparc_Solaris10. Thanks in advance- -rickp -------------- next

# cat /etc/redhat-release CentOS Linux release 7.1.1503 (Core) # uname -r 3.10.0-123.20.1.el7.x86_64 Hi, We use iSCSI over a 10G Ethernet Adapter and SRP over an Infiniband adapter to provide multipathing to our storage: # lspci | grep 10-Gigabit 81:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01) 81:00.1 Ethernet controller: Intel Corporation

Hi there, I have one server acting as a iscsi target running windows storage server r2 sp2 and the other server is running centos as an initiator. They are connected to a switch over a 1Gbit ethernet connection. the target is a Dell NF600 and the server running centos is a Poweredge R900. We want to move this configuration to a FC based installation using a Dell QLE2462 HBA (this is the hba we can

Hi, i''m having problems attaching disks from a fc-san to a solaris 10 guest. xen host ist a opensolaris box "SunOS node1 5.11 snv_127 i86pc i386 i86xpv". my xen guest is named pg4. this command works fine. virsh attach-disk pg4 /dev/dsk/c8t600A0B800029D69A000013CA4B00E1ABd0 hdb and before i was able to import this volume as a zpool on the xen host - so connection to this

I want to configure my zfs like this : concatination_stripe_pool : concatination lun0_controller0 lun1_controller0 concatination lun2_controller1 lun3_controller1 1. There is any option to implement it in ZFS? 2. there is other why to get the same configuration? thanks This message posted from opensolaris.org

Hi there, I've installed a Qlogic HBA in a 4.8-STABLE machine and I'm able to present LUNs to this machine from an HDS array and use them. That all works perfectly. However, the only time I pick up new LUNs is on a reboot. Seems like I should be able to rescan the fabric and pick up new LUNs, but there doesn't seem to be a way to do this. I tried camcontrol rescan, but that

arrrgh, I'm trying to install the QLogic Linux Super Installer on a CentOS 6.4 server that has a QL2532, and getting... # ./qlinstall -i #*********************************************************# # HBA/CNAs Driver Installer for Linux # # Installer Version: 2.2 # #*********************************************************# Kernel

Hi, Does OCFS require NAS hardware to run or does normal PC hard disk work? Thanks, Pete -------------- next part -------------- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20081219/1bc9110b/attachment.html

Hi Well we are now using HP instead of Dell and have hit a major hurdle. We dont seem to be able to kix any of these boxes. I have been most recently trying on a dl585 and the issue appears to be that the kix kernel does not detect any nic. Its strange as the box can be installed using iso's and the nic appears as eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz

Hi all. We developped a pv-scsi driver that we refered Fujita-san''s scsi-driver and blkback. (see, http://www.xensource.com/files/xensummit_4/Xen_Summit_8_Matsumoto.pdf) The pv-scsi driver''s feature is as follow: * Guest has dedicated SCSI-HBAs of Dom0. * Guest can send scsi_cdb to the HBAs. * Guest recognises the HBAs from hostno of xenstore. Currentlly, We are

All, I would like to run the following issue past the list to confirm that my problem analysis makes sense or whether I missed something: We have a HP ML370G6 server with VT-x and VT-d enabled in the BIOS. It is equipped with two Smart Array HBAs - one connected to the HDD array (SmartArray P800) and one connected to an LTO tape drive (SmartArray P212). Both controllers use the same driver

Package: xen-hypervisor-4.0-amd64 Version: 4.0.1-4 Severity: important *** Please type your report below this line *** Hello Debian Team, I have some strange behavior with a DL585 G7 with only two cpu sockets used (Opteron 6238 Interlagos). I use Debian 6.0 with a XEN Kernel. Every time when I start a DomU, the server makes a hard reset without any kernel panic or output. When I start the

We just installed a new cluster with 6 HP DL380g5, dual single port Qlogic 24xx HBAs connected via two HP 4/16 Storageworks switches to a 3Par S400. We are using the 3Par recommended config for the Qlogic driver and device-mapper-multipath giving us 4 paths to the SAN. We do see some SCSI errors where DM-MP is failing a path after get a 0x2000 error from the SAN controller, but the path gets puts