similar to: one dude about rt_tables

Hello, everyone! I would like to solve the following problem. Btw, I''m terribly sorry about the pseudo-asciiart, but that''s all I can paint as a tropology. I''m hoping it''ll be enough. ----Internet---- | | | eth0 machine A routing+ipchains eth1 | ------------------ machine B So, given I''m running kernel 2.4.19 and using ipchains

ok i will do it in text: 66.92.114.46 eth0 209.141.2.194 eth1 192.168.119.101 eth2 192.168.120.101 eth3 What i have is a linux box RH7.3 which will eventually run Shorewall Firewall. On this box there is eth0 66.92.114.46 conneted to isp1 and eth1 209.141.2.194 connected to isp2 It also has eth2 192.168.119.101 and eth3 192.168.120.101 which will connect to a failover appliance which has 2 wan

Hello,I have single linux router ( fedora core 1 ), 2 ISP, 1 internal network,1 IP space from every ISP My scenario: eth0 1.0.0.2 netmask 255.255.255.252 -> ISP 1 eth1 2.0.0.2 netmask 255.255.255.252 -> ISP 2 eth2 1.0.1.1 netmask 255.255.255.0 -> IP space from ISP1 eth3 2.0.1.1 netmask 255.255.255.0 -> IP space from ISP2 Config I try: /etc/iproute2/rt_tables: 10 isp1 20 isp2 ip

Hello everyone, Please excuse these basic questions but I am new to Linux and I am getting desperate for answers. We are running redhat linux and after many hours of investigation I am unable to get a certain ip rule and ip route command combination to work. These are the software versions installed. [root@c1b04a01 linux-2.4.21-15.EL]# uname -a Linux c1b04a01 2.4.21-15.ELsmp #1 SMP Thu Apr

I already setup several 2 gateways boxes, with rules too decide which lan should use which gateway. Now I''m stuck with a simpler problem. At home I was just making some experimental setup: * 1 adsl (ppp0) * 1 more tables in rt_tables (200 ping) called "bluff" * table ''bluff *has not* a default route root@fw-eden root # ip ro li table bluff

I''m using Debian (sarge) I do now have 2 ISP, one DSL and one cabel. I want to use the DSL as my primary and only use the cabel-modem if the DSL fails. The setup is: IP1 -> Router -> NAT_IP1 -> eth0 -> eth2 (LAN) IP2 -> Cable-Modem -> eth1 -> eth2 (LAN) I wrote the following in my /etc/iproute2/rt_tables ip rule add from NAT_IP1 lookup 1 ip route add

I am working on a split route and ShoreWall system. I reviewed the lartc documentation but have a few areas that I still need help on. Here is my network: 64.xxx.xxx.1/25 66.xxx.xxx.129/26 | | ################################################# # Eth2 64.xxx.xxx.2 eth0 66.xxx.xxx.130 # #

I''m working with LEAF boxes as gateway machines. I''m trying to implement Proxy-ARP to build a bandwidth manager for my network. I''ve gone as per the lartc howto to implement a transparent bridge in an existing network and plan to put in my tc script after this. I''m configuring the box as a standalone one before plugging it into the network. I''m getting

I''m playing around with VLAN''s and I have a VLAN capable (layer 2) smart switch. I see a steady stream of martians in the logfile if I have the routefilter option set on the loc zone interfaces in /etc/shorewall/interfaces. I have two interfaces in the loc zone, eth1 and vlan2 respectively. vlan2 is an 802.1q trunk going towards the switch. Is this the expected behavior in

hi all, i have been able to find only a trickle of information concerning possible strategies for a 2 adsl setup using two different isp''s. has anyone had experience in the usa or elsewhere working with their providers to carry bgp tables, or would you recommend/implement a round-robin arrangement? how ? :-) yours sincerely christopher cuse, rhce/ccna ccuse@tiscali.fr redhat 8.0

https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=40 laforge@netfilter.org changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED ------- Additional Comments From laforge@netfilter.org 2003-02-03 16:49 ------- We haven't seen this

Hi all! I try to make port based routing, because a have two connections to the internet. My router is a "one disk floppy router for linux". It is a big router project www.fli4l.de. I try also to make a opt, it is like a plugin for this router. This project uses Kernel 2.2.19 compiled with libc5 (because it is small and you can use one floppy disk). At the moment, iproute2 is not

Hello all, I need a virtual firewall/router solution. I''m thinking of a netscreen 1000 but I want to know if it can be done in Linux. Here is my idea: 1 Linux box 2 GigE interfaces 1 interface setup with a public IP address ($PUBIP) 1 interface setup with 802.1q VLAN trunking with 100 vlans assigned ($VLAN1-$VLAN100) a /25 subnet routed to $PUBIP from my core routers All $VLAN

Hello... I have one 2Mbit WAN interfaces and two vlan LAN interfaces - vlan2 and vlan3. I''d like to limit bandwidth something like this: rate 1Mbit ceil 2Mbit for vlan2 and rate 1Mbit ceil 2Mbit for vlan3 with possibility to borrow bandwidth between vlan2 and vlan3. ^^^^^^^^^^^^^^^^^^^ Is it possible to do in any way? regards, -- Michal

Hello, can anybody help me how to configure vlans? There are vlans: vlan2 vlan3 vlan30 Server has one nic - eth0. vlan2 should be dom0 eth0(peth0) for management Each vlan3 and vlan30 should be has its own bridge. How to make it? Br Peter _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I want to use the dsmark, but it always says: "unkown qdisc", although I have enabled it (y in Network options), and I have my kernel recompiled. I am using SuSE 8.1, 2.4.20 Kernel, tc available at the HTB site (with already precompiled HTB queue). Can anybody find the problem? thx _________________________________________________________________ MSN 8 helps eliminate e-mail

I couldn''t find anyone who had actually made it work via google so I guess I''ll ask here. My setup is a VPN point to point link. The VPN is a modified version of Openvpn where I''m using zlib compression to improve the compression a bit. The goal is to shape traffic coming from a routing server through the vpn to the endpoint of the vpn and in such a way maximize the

I found following paragraph in the man page of iproute2. equalize allow packet by packet randomization on multipath routes. Without this modifier, the route will be frozen to one selected nexthop, so that load splitting will only occur on per-flow base. equalize only works if the kernel is patched. ^^^^^^^^^^^^^^^^^ Now, where

hi thanks for your reply heh "Example: ip del rule pref 32742" is syntically wrong :) and when i tried "ip rule del 32742" it gives me error # ip rule del 32742 Error: argument "32742" is wrong: Failed to parse rule type so how to get get of these extra rules? 0: from all lookup local 32742: from all fwmark 0x2 lookup squid.out 32743: from all fwmark 0x2

I'm looking for some information regarding the interaction of KVM, VLANs, firewalld, and the kernel's forwarding configuration. I would appreciate input especially from anyone already running a similar configuration in production. In short, I'm trying to figure out if a current configuration is inadvertently opening up traffic across network segments. On earlier versions of CentOS