similar to: Latest techniques for multiple PPP load-balancing

how to use iproute/iptables to balance by packet OUTBOUND traffic between 2 PPP (pptp cable modem and pppoe adsl modem) links to the same ISP . also by using the fact that the ISP dosen''t filter source IP address - meaning i can use either PPP''s link assigned IP address as the source IP in the ip header.., it works for both devices.., what i want to achive is : when uploading a

Hi, can anyone help me with this problem i''ve got! I have a problem with routing on my Mandrake 7.2 Linux Box i was wondering if you could help me with. I live in Australia and as broadband access isn''t very available at the moment, i have 2 modems to dialup to my isp (dynamic ips assigned) to increase my bandwidth at an affordable level. What currently happens is i have a

I have two adsl lines on my linux firewall box and i want to do some load balance between them...i tried a lot of different things, but it isn´t working...Following the instructions of http://lartc.org/howto/lartc.rpdb.multiple-links.html i used the configuration above. using "iptraf" I can see some few packets using the ppp1 connection, but almost all the packets use ppp0 connection.

I have a private lan that is connected to the world via 3 dsl lines. I put up a linux box that handles all the dsl lines, lan gateway and all is working well...until...one of the dsl lines goes down. My routing table is: x.x.x.x dev ppp0 proto kernel scope link src x.x.x.x x.x.x.x dev ppp1 proto kernel scope link src x.x.x.x x.x.x.x dev ppp2 proto kernel scope link src x.x.x.x

Hi Ppl I have 5 adsl lines that after reading quite a bit i managed to get load balanced now abvoiusly it doesnt load balance evenly and this works on what routes are still in the routing cache. my question is my outbound masquerading had to be modified to use snat in iptables instead of just plain masquerading my outbound masquerading now works but my inbound port forwarding doesnt work would

Hi list, I have tried google but just cant get this to work or figure it out. My setup ======== vanilla 2.6.13 kernel with CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_MULTIPATH_CACHED=y CONFIG_IP_ROUTE_MULTIPATH_RR=y CONFIG_IP_ROUTE_MULTIPATH_RANDOM=y CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=y CONFIG_IP_ROUTE_MULTIPATH_DRR=y My configuration: A host with two ppp links. Ontop of these two ppp dialup

Hello Shorewall list, I''m a happy Shorewall user since a few years now and everything works fine for me except one thing that I try to implement since a week, the multi-isp. I''ve downloaded the 2.4.0 Stable release yesterday and tried the RC2 since a week. My config is a Debian running a kernel 2.4.27 home made with the CONNMARK.diff patch applied I''m using 2 ISP,

yes, this is a crazy subject. I have 4 ADSL lines to the same provider, which even have the same gateway. Those lines are connected to the same machine (more crazyness: even connected to the same nic. it works fine, I swear). this machine will serve this conenction to a local net. so, I setup the ifaces correctly, everything works. I add balancing using this command: # ip route replace default

Hi There, We currently using iproute2 for load balancing. However we need more upload speed as we load balance over 3 dsl lines. I''ve been looking for a way to combine the upload speed to more faster. Found a site called www.upstreaminter.net where these guys bond the adsl channels to improve uploads, Since downloading is problem as its need to know the ip address of the downloader they

Hi folks, i spent my whole day trying to set up my linux router using load balancing with multiple uplinks. I mainly focused on the nano howto, but somewhere I have a big mistake within my head. Basically the load-balancing is working, but not on a per-connection basis - just on a per packet basis. Practically this is not usable of course <g> But as far as I understood it should work..

Hi, I need a help on Linux routing, if you have some sparse time. I''m based in Madagascar and my English is not good; so please forgive me. *What I want to come-up with: *My main goal is to download using two modems at the same time, and combining their bandwidth, but I have failed miserably. The reason is this: our country is still using poor slow internets, and I have seen on the

I''ve applied julian''s paches to a 2.6.14 gentoo kernel with the appropiate options enabled, and i''m using a modified version of the mpath2.sh script also available on julian''s site http://www.ssi.bg/~ja/ Overall everything works nearly perfectly. Incomming connections to either the fios (PPPoE) connection, or cable modem get routed back out correctly. The

I have three ADSL lines that I''d like to use as one big pipe to the internet. The ADSL service works by establishing a pppoe connection (the ADSL "modem" is a bridge), and each pppoe interface gets its own IP address. This means I''d have to have 4 ethernet interfaces (3 for each of the ADSL modems and 1 for the LAN) in my gateway. I''d setup the gateway to NAT

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

Hi all .... I Have installed Bering LRP on Many sites and I am very pleased with the capabilites of shorewall. Howerver I came across a prob that I am unaware ot its solution. Using shorewall 2.0.2f Kernel 2.4.24 On one Site LRP box serves internet outgoing connections through ( static IP ) a DSL line AND an incoming dial-in PPP conection. My shorewall configuration Is based upon the fact

Hi all iam trying to deploy loadbalance and failover My setup description --Fedora Core 4 --Linux 2.6.12.3 #1 SMP Mon Jul 25 22:37:34 IST 2005 i686 i686 i386 GNU/Linux --tc utility, iproute2-ss050314 --ip utility, iproute2-ss050314 --iptables v1.3.0 And i had deployed Following configuration #table main with priority 50, the highest one ip rule add prio 50 table main #table 201 ip rule add

Hi Here is a short description of my network: ppp0 (adsl) ppp1 (adsl) | | | | --------------------- | Router | | Firewall | | MASQUERAD | | DNAT | | | | eth0 | --------------------- | | | ---------------------- |

Hi, Thanks for the reply. Thats where the problem starts. If I set ppp0 as the default gw the internet doesnt work anymore. This is how im doing it... route del default route add default gw 217.32.81.74 dev ppp0 if I put it back to ppp1... route del default route add default gw 217.32.68.73 dev ppp1 It works fine again. Whats up with that? Cheers, Chris ----- Original Message

Hi, I''ve set up a Linux box with redhat on to act as an internet gateway and I''m running into a few problems. Its got two adsl modems connected to it, both connected to seperate 512kbs lines. Now I''ve followed the simple source routing in the advanced routing howto to the letter but it doesnt work. I''ve got it autoconnecting on startup and redhat puts ppp1

Hi you all guys/girls from this list, I almost never use email lists, but this problem is driving me crazy. I use shorewall for a long time ( since version 1.2.x) but now I use it where I work, and here we now have 4 different ISP for redundance and because it''s cheaper then 1 ISP and a bigger link. 3 of 4 ISP I have no problems, but on the 4th ISP here goes my problem : I have a