Hi all,
This is easy. First let ppp0 as your default gateway and
use iproute to create a table call any name you want and
then you put ppp1 default route inside that table. After
that you have to create a rule to put the host you would
like insede it and dont forget to put a rule in the
iptables saying that everything going out via ppp1 SNAT -
-to IP_PPP1_EXTERNAL. ;)
[]´s
Anderson
> Hi,
>
> I''ve set up a Linux box with redhat on to act as an int
ernet gateway and I''m running into a few problems. Its g
ot two adsl modems connected to it, both connected to sep
erate 512kbs lines. Now I''ve followed the simple source
routing in the advanced routing howto to the letter but i
t doesnt work.>
> I''ve got it autoconnecting on startup and redhat puts p
pp1 as the default gateway, this is then setup for masque
rading for the entire network. Therefore I''ve tried sett
ing up ppp0 as the deafult gateway for only one computer
(10.0.0.11), as it says at http://lartc.org/howto/lartc.r
pdb.html#LARTC.RPDB.SIMPLE I''ve done everything it says t
here and im 99% sure I''ve put the right ip addreses in et
c. When Ive gone through it that computer is no longer a
ble to access the net (the rest of the network is unaffec
ted).>
> I''m pretty sure its the way ppp0 is configured, if I se
t it up so 10.0.0.11 uses ppp1 instead of ppp0 (ip rule a
dd default via xxx.xxx.xxx.xxx dev ppp1 table chris) it w
orks fine but obviously thers no point in that.>
> Hope all this makes sence to someone, it baerly does ti
me. May thanks in advance.>
> Chris
__________________________________________________________________________
Acabe com aquelas janelinhas que pulam na sua tela.
AntiPop-up UOL - É grátis!
http://antipopup.uol.com.br/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/