similar to: Setup IMQ on kernel 2.4.20

Yesterday I started using CBQ in production on our firewall over an IMQ device, but since then I get a lot of messages in my syslog like below: On Wednesday 13 November 2002 09:07, root@ism.nl wrote: > Nov 13 08:01:36 firewall kernel: NET: 1 messages suppressed. > Nov 13 08:12:36 firewall kernel: NET: 1 messages suppressed. > Nov 13 08:18:36 firewall kernel: NET: 1 messages

Hi I try setup imq pseudo device for shaping I''m work such script #!/bin/sh TC=/sbin/tc /sbin/modprobe imq numdevs=1 /sbin/ip link set imq0 up $TC qdisc add dev imq0 handle 1: root htb default 1 $TC class add dev imq0 parent 1: classid 1:1 htb rate 10mbit # client1 tunnel tunnel $TC class add dev imq0 parent 1: classid 1:2 htb rate 256kbit $TC filter add dev imq0 protocol ip parent 1:0

Hi, I have a default class for my un-marked traffic (prio 5) and a prio 0 class for the important stuff, but I do not understand why my download traffic is duplicated in both. It work fine for my upload traffic (same setting except the red class but I have the same result if I create an esfq instead). Any comments/information will be appreciated. Below my config : tc commands from my scirpt :

hi, i cant get the -j IMQ on netfilter. The module is loaded Module Size Used by Tainted: P ipt_IMQ 768 0 (unused) imq 1912 0 (unused) but i cant find the object in /usr/local/lib/netfilter/*imq.so i tryed recompiling manualy iptables but it didnt work to. what could it be? im using iptables 1.2.8, kernel 2.4.20. Thanks!

Devik, Can you send Htb to Marcello Please? Its only a module, but its about time it went mainstream. Maybe its too late for 2.4.19, but 2.4.20 will come. Same comment for IMQ also. Regards John

Hi I have built a custom TMB Mandrake kernel (2.4.22) with IMQ and ESFQ support. I statically compiled both (mistake?) ESFQ is sorted and working fine (I have succesfully patched IPROUTE2). I have got to the stage where I can see the IMQ device as UP with ifconfig. I can use TC to add QDISCs to the IMQ device. However I just cannot sort out IPTABLES to actually redirect packets to the IMQ

Hi folks, I have the traffic shaping (HTB and IMQ) on my eth0 (of course no problems with it). And now I would like add some extra IPs on it ( ifconfig eth0:0 xxx.xxx.xxx.xxx and ifconfig eth0:1 xxx.xxx.xxx.xxx). So do I have to set up a new tc rools ( tc qdisc add dev eth0:0 root handle 1: htb default 20 r2q 5 ...) for the eth0:0 and eth0:1 or can still be only tc rules for the eth0? Thanks

Hello all, I have been doing a lot of archive searching over the last week reading posts on IMQ and it''s apparent stability / instability. I have seen a number of posts about it not being maintained as well. Can anyone talk to me about IMQ''s stability in a heavy throughput environment (20 Mbps) and what was causing IMQ to fail if you know. Thanks, Mike

Hello, After reading the excellent HOWTO I got traffic shaping working nicely over ethernet devices on a test setup. I can''t put this setup live though, because our main firewall has three 2mbit hdlc interfaces instead of a single device. We are using multipath routing using iproute2 nexthop at the moment, and that works fine for firewalling. But now I have a need for shaping and

hi all, i have applied all patches and compiled the kernel (2.4.21), iptables (1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run "modprobe imq numdevs=1", the system returns - imq.o: init_module: Device or resource busy the transcript is below - [root@vmlinux project]# modprobe imq numdevs=1 /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or resource busy

Hi, i tried to insmod the imq.o module from http://pupa.da.ru/imq after a successful compile, but it thows this error: > insmod imq.o imq.o: unresolved symbol nf_unregister_hook imq.o: unresolved symbol nf_register_hook I think I have some kernel options disabled, does anyone know which one(s)? Thanks cord _______________________________________________ LARTC mailing list /

Hi Guys, I''m trying to compile IMQ with kernel-2.4.26 and iptables-1.2.9 and I want to know is this procedure is correct: ---------------------------------------- - In Kernel 2.4.26 Directory (/usr/src/linux) # cd /usr/src/linux # wget http://www.linuximq.net/patchs/linux-2.4.24-imq.diff # patch -p1 < linux-2.4.24-imq.diff - In Patch O Matic Directory

Hi! I would like to thank very much for this great page with Kernel Packet Traveling Diagram and to suggest small update concerning IMQ. I think the sentence: "IMQ in input comes before nat so IMQ does not know the real ip address. Ingress comes after nat, so ingress knows the real ip address." could be more precise like that: "By default IMQ in PREROUTING comes before nat and

Hi Guys, Using the 2.6.test kernel? Alex and I have done some more tests and this is the patch incase ur using jdg-qos script http://www.digriz.org.uk/jdg-qos-script/index.html#qos-2.6 Thanks K _________________________________________________________________ Winterize your home with tips from MSN House & Home. http://special.msn.com/home/warmhome.armx

I have a linux box with kernel 2.4.22 and iptables 1.2.9 First, i patch linux kernel with Norbet Buckmuller''s .diff #cd \usr\src\linux #patch -p1 < imq-combo-debian-2.4.22.diff All correct Second, i -try to- patch iptables (following www.linuximq.net/faq.html) #cd /usr/src/linux/net/ipv4/netfilter I edit IMQ.pom-ng.patch and replace $KERNEL_DIR with /usr/src/linux #patch

Hello there! I was reading this archive: http://mailman.ds9a.nl/pipermail/lartc/2002q3/004725.html It was almost two years ago when Patrick wrote a patch to switch IMQ with nat in PREROUTING chain... From www.linuximq.org I''ve downloaded newset IMQ driver for 2.4.26 and what can i see? The line that Patrick changed in that patch is still as it was in previous relases. Are there

Hi I''ve a stupid question. How can I shape upload using IMQ? Instead of putting a rule in iptables in PREROUTING should i use POSTROUTING? And another question is, can I make routing rule based on ip addresses assigned by iptables to an imq device? The idea is, let''s say i have some rules in iptables like: -t mangle -A PREROUTING -s 192.168.0.0/16 -j IMQ --todev 0 Can i route

hi all, i want to try htb3 with imq downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :( this are what i did can anyone guide me what went wrong on the first step itself !! [root@cab1 root]# modprobe imq numdevs=1 modprobe: Can''t locate module imq [root@cab1 root]# [root@cab1 root]# tc qdisc add dev imq0 handle 1: root htb default 1 Cannot find

Hello, Some time ago I''ve read somewhere that local traffic in IMQ could hung up the whole system but it was corrected long time ago. So I was very surprised yesterday when it occurred not true. While testing IMQ I''ve observed for some time that - if you tag some local traffic with iptables both in pre- and postrouting - kernel is hunging up. It is happening quite quick with