similar to: QoS net-snmp ?

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

Dear All, I have configured Cluster Suite with 2 servers Server 1 : 192.168.13.110 IP Address Server 2 : 192.168.13.179 IP Address Floating : 192.168.13.83 IP Address (Assumed by currently active server) I want all snmp packets going out through the active server to be stamped with floating IP So i have added a iptables rules as "iptables -t nat -A POSTROUTING -p udp -s

Greetings all, I''ve been searching high and low for any inkling of how people are monitoring classes for long term usage data. I''m thinking something along a script to collect the data for mrtg or perhaps even an snmp module that would present them as interfaces to be polled....has anyone done any work in this area? John Dunning Assistant Director Net & Tech Svcs Wayne

On 02.10.2014 03:42, Charles Lepple wrote: > On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: > >> Why is ups.status empty? > If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for ECO mode. It does not appear to do that: > >

I have a Cisco 6509 switch that I'm monitoring with SNMP from a CentOS5 machine. SNMP polls are the only access I have to this device, we are not allowed to log on via telnet. How can I find out which port on the switch a particular server is connected to? I was hoping that this is somehow possible using the mac address and the data gathered from snmpwalk/snmpget requests but I'm not

I did a bunch of work on this today. It should be all set to go. This patch is to add support for the Cyberpower RMCARD snmp cards. I basically copied the driver for bestpower, changed the name and updated the mib map. I have this running on two separate systems (two separate ups's) and it looks good. The only thing I could not figure out was updating the Makefile.am (my aclocal/libtools

Hi, This appears to be related to a thread from January 2010: http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-January/004470.html NB: This is on an HP-UX 11.31 box, using a self compiled and packaged version of NUT 2.6.3, and net-snmp v5.7.1. Therefore some of the search paths and things like that may well be wrong because I've done something dumb. I'm also only just getting

On Oct 2, 2014, at 1:53 AM, Tarvo Tiits <Tarvo.Tiits at automaatika.ee> wrote: > On 02.10.2014 03:42, Charles Lepple wrote: >> On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: >> >>> Why is ups.status empty? >> If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for

nut-2.6.5 Scientific Linux 6.3 APC AP9630 management card My basic question is, does nut's SNMPv3 implementation work? I have this in /etc/ups/ups.conf ...... [tfapc01] driver = snmp-ups port = tfapc01.testfest.ixorg.org mibs = apcc snmp_version = v3 secLevel = authPriv secName = tfsnmpprof1 authPassword = ralow6moHet7zoboP8 privPassword = tuseL8Pakaz9degim7 authProtocol=MD5

G'day I'm currently using NUT on Debian squeeze box in the same subnet with an IBM 3000 HV (branded Eaton 5125 with Web/SNMP card), now I wanted to get our storage appliance running NexentaStor 3.1 set up to be using NUT too. Nexenta- Stor is an OpenSolaris / illumos-based appliance OS currently using NUT packages from ubuntu hardy. My question here is whether I'm running into a -

On Oct 1, 2014, at 5:07 AM, Tarvo.Tiits at automaatika.ee wrote: > Why is ups.status empty? If I understand the commit log for SVN r3590, then that revision was supposed to set the status to OL if the numeric state was 9 for ECO mode. It does not appear to do that: https://github.com/networkupstools/nut/commit/9cb2de3d9568aa382cc118b4385d97d5664c457b Is your UPS set to ECO mode? Can you do

Hi, I have UPS Socomec ITYS 3000 with Netvision card. OS is Centos 6.5 64-bit. NUT installed with yum,. nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Why is ups.status empty? Here is upsc output: upsc myups at localhost battery.charge: 97.00 battery.runtime: -60.00 battery.voltage: -0.10 device.mfr: Net Vision v6.01 (SN 0101414290) device.model: ITYS 3 kVA device.serial: 3I14450043

Hello I'm trying to setup SNMP on my Centos 4.2 server. I want the ability to monitor the disk and some other non default settings that can be defined in snmpd.conf but when I request the data, it doesn't give the disired results. Config below and trap results below. Thanks in advance for any help. Kevin [root at localhost snmp] snmpget -v 2c -c public localhost disk

Hi all, I hope someone can help me with this one. I'm trying to graph all traffic on the localhost's network card with Cacti. >From what I understand I should use SNMP to query the traffic, but I can't seem to get SNMP info for the network interface. I have installed all the necessary snmp tools, "yum install snmpd net-snmp net-snmp-utils net-snmp-devel net-snmpt-libs "

I'm in the process of trying to get NUT to manage an APC SmartUPS. Monitoring of the UPS is working fine: $ upsc nutdev1 at localhost Init SSL without certificate database ambient.1.humidity.alarm.high: 60.00 ambient.1.humidity.alarm.low: 30.00 ambient.1.temperature.alarm.high: 40.00 ambient.1.temperature.alarm.low: 10.00 battery.charge: 94.00 battery.charge.restart: 0 battery.current: 0.00

Couple of little things I noticed with a new RELENG_7 AMD64 box (as of yesterday) ifstat from the ports cannot seem to find interfaces for some reason ? It works fine on i386 [ns8]# ifstat -b ifstat: no interfaces to monitor! [ns8]# [ns8]# ifconfig em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

I think I've found out why MacOS 10.5.x (Leopard) clients are unable to connect to Samba shares when authenticating with Kerberos. Basically, the Leopard Macs insert a few extra bytes (Padding and reqFlags, according to wireshark) into the security blob within the Session Setup AndX Request packet, bytes whose start tag is 0xa1, in a spot where Samba's parser expects 0xa2. The critical

Hi all! I know this is quite offtopic, but I found nothing in google nor in the net-snmp mailing list, and I know there''s a lot of people here graphing with snmp+rrdtool. I installed net-snmp 5.1.2-6.1 in Debian to produce graphs for some ethernet interfaces. It seems it''s not reporting correct values for them. Here''s my snmpd.conf (very simple) and the output from the

How might I discover, via SNMP, which boxes are running libvirt-snmp? Performing a walk from the top seems to skip the Libvirt MIB ... (why is this?) ~/walk$ snmpbulkwalk -c public kvmtestbox .iso | more SNMPv2-MIB::sysDescr.0 = STRING: Linux kvmtestbox.company.com 2.6.32 -358.23.2.el6.x86_64 #1 SMP Wed Oct 16 18:37:12 UTC 2013 x86_64 SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-TC::linux

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I figured out why nut seemed to segfault at startup from my Solaris boxes (and snmp-ups too) - I believe that nut is trying to use some MIBs that do not exist on my particular PW9170, for whatever reason. It dies on my Linux box too, complaining like this: pkdick:~/nut/bin# ./snmp-ups -x mibs=pw -x community=publicstring upsname Network UPS Tools -