similar to: help on ADSL shaping

Hi, i''m trying to use PCI passthrough feature on Xen 4.0 but it fails on my Wireless card. I use Xen 4.0 on a Debian 6.0 (package from repo) and try to passthrough the following PCI device root@omega:~# dpkg -l | grep xen ii libxenstore3.0 4.0.1-1 Xenstore communications library for Xen ii linux-image-2.6.32-5-xen-amd64 2.6.32-30 Linux 2.6.32 for 64-bit PCs, Xen dom0 support ii

Hi all, I''ve done a search through the archives but I can''t find a cause/solution to this. I''m running a FC4 box with the stock 2.6.12 kernel and a FC2 box with a stock 2.6.9 kernel. I''m obviously using iproute2 and the patched tc. When I clear down the qdiscs with "tc qdisc del dev <DEV> root" I get the following in response to "tc

Dear list-members! I am using OpenWRT (www.openwrt.org) on two accesspoints. Within OpenWRT, the wireless interface and the ethernet interface are bridged to one interface (br0). Those two accesspoints are standing quite far from one another. Their WLAN-cells do not cross each other, meaning I have an area in between the two accesspoints, where there is no accesspoint of the two accessible: a

Hi all, I''ve been trying to do the above and read everything I can find on Google on the subject, but something seems to be going wrong. I tried the following sample rules in iptables (initially I just set the first one, but I added more as my desperation escalated): iptables -t mangle -A PREROUTING -p icmp -j MARK --set-mark 1 iptables -A FORWARD -p icmp -j MARK --set-mark 1

hi list members, my goal is to make one of my DomU''s act as a wireless accesspoint... So, i need it to have access to the pcmcia wlan card attached to dom0. But how ? when i give the pci=[] option to the domU config file its shows up with lspci but i cant use it... (on debian with module-assistent get rt2x00 in de DomU) Is it possible or would it be better to use a more direct interface

Did anyone see the article? It''s the first time I really noticed that these little Linksys routers are such a fully fledged linux machine with a decent processor and a replacable firmware. I am now itching to get one to replace the multipurpose firewall desktop machine. Has anyone experimented with the current state of the firmware and how advanced you can get with tc rules? For

Good day all Now I''m from South-Africa,here we have adsl router/modems You set the router to do the dialup and authentication and the set it as your gateways box''s gateway.Now sometimes the links gets drop and is off for a while.Are there any way,for linux,my gateway of letting me now that the link was/is down.Note that the box is not dialing so there is no adsl-status. What I

hi all. First of all, sorry for my (bad) english. I Want to balance the traffic in a local network over two ADSL. I wanna send http traffic trough ADSL line number 1. And the other traffic by the default ASSL (number 2) Can you help me ? thx. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

hi all, I have a firewall with 2 gateways. Router A (main, adsl), router I (backup, isdn). In case of failure of adsl I switch to isdn. How can I know when it is time to go back? Which is a standard way to test the adsl line? TIA sandro -- Sandro Dentella *:-) e-mail: sandro@e-den.it http://www.tksql.org TkSQL Home page - My GPL work

Hello, My system is: Server with Slackware 8.1 LINUX, ADSL Internet with PPPoE connection, and I masquerade my LAN. I use "Roaring Penguin" PPPoE client for my ADSL connection. I would like to connect another ADSL line (also PPPoE) to my server and have two lines, because I want to make "Simple source policy routing", as described in LARTC HOWTO. How should I set up my

Hi Ppl I have 5 adsl lines that after reading quite a bit i managed to get load balanced now abvoiusly it doesnt load balance evenly and this works on what routes are still in the routing cache. my question is my outbound masquerading had to be modified to use snat in iptables instead of just plain masquerading my outbound masquerading now works but my inbound port forwarding doesnt work would

I have two adsl lines on my linux firewall box and i want to do some load balance between them...i tried a lot of different things, but it isn´t working...Following the instructions of http://lartc.org/howto/lartc.rpdb.multiple-links.html i used the configuration above. using "iptraf" I can see some few packets using the ppp1 connection, but almost all the packets use ppp0 connection.

hi all, i have been able to find only a trickle of information concerning possible strategies for a 2 adsl setup using two different isp''s. has anyone had experience in the usa or elsewhere working with their providers to carry bgp tables, or would you recommend/implement a round-robin arrangement? how ? :-) yours sincerely christopher cuse, rhce/ccna ccuse@tiscali.fr redhat 8.0

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I''m using HTB to shape my outgoing traffic over a ADSL-link with PPPoE with a nominal bandwidth of 128kbit/s. My goal is to favour small packets like ACKs and interactive services like ssh; in other words, I want to achieve low lantency. If there are some big packets going over the wire, everything works fine. But if there are

here''s the output : # tc -s -d class show dev eth0 class cbq 1: root rate 10Mbit cell 8b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1514b level 2 ewma 5 avpkt 1000b maxidle 23us Sent 294 bytes 7 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 605 undertime 0 class cbq 1:10 parent 1:1 leaf 10: rate 100Kbit cell 8b prio 1/1 weight 100Kbit allot 1600b

Hi - I am trying to find a Linux based solution for one of my clients, I want to bond two adsl lines into one, with redundancy (if one fails the other does all the work). I''ve been looking into ECMP (Equal Cost Multipath), I know BGP would work, but something like ECMP would be much simpler. I have full control of both ends of the connections and I can have both ADSL lines terminate in

Hello! I read the Split access and Load balancing sections into LARTC (Chapter 4). However I have one gateway only and the LARTC says about 2 links. I need to know how to make a load balance with my links. Thanks in advance. Eriberto - Brazil

First of all i wanna thanks Christoph Simon for the support. Only after his reply to my email i could see the real solution to the problem (Valeu mesmo cara... me ajudou pra caramba! Fico te devendo essa!) :) Here is what i learned in a month of research: I tried A LOT of things to do load balance, including the one at LARTC homepage. The only tutorial that REALLY works in my case is the

Hi all, I have managed to setup a Fedora 7 box with 3 ethernet cards and two ADSL modem/routers from different suppliers as LARTC recommends. I am able to direct traffic for specific internal IPs either to one or the other ADSL line. However, I am faced with two problems I am struggling for the solution: 1. I have opened a few ports on the ADSL router/firewalls to talk to internal hosts; say when

Hi, I live in a rural community where adsl and cable is not widely available. I correctly have an option of using adsl or cable at my location. Ten miles away my friends apartment building has no option of cable or adsl. I set-up a wireless link between my friends apartment building and my house. It works great for him and me and the adsl company doesn''t care because they