similar to: Re: QoS for Voip.

Hi, I want to see bandwidth every ip address in the local network that passing my linux gateway in the console, may be it''s similar like mrtg (web based version) It''s possible ? Best regards, >--<Kristiadi Himawan>--<

tc qdisc add dev eth0 root sfq perturb 10 I want to set perturb to 8 then i used this tc qdisc add dev eth0 root sfq perturb 8 system give me the following message RTNETLINK file exists I delete the rule by this :"tc qdisc del dev eth0 root sfq perturb 10" please tell me how can i delete the rule by another way and where is "RTNETLINK file"

Hi Is there a way of marking packets by mac address instead of ip or ports using a "tc filter u32 match"? I read somewhere that I could use the offset -8 and -14 to grab the mac addresses but if I use anything lower than -8, for example -9, I get an error. I''m modifying the wondershaper script to cap the download speed by mac address. Any sugestions?

i''ve installed mrtg to make graphics of the trafic from the interfece throw the snmpd, and the same with ipac witch put iptables accounting rules colect them and store, and gets the output, but the "problem" is that ipac graphics are 3 times smaller that the snmpd. Why??? i did catch all the trafic with ipac so no problem here, and i know that ipac/iptables is at level 3, and

Hello, I am a newbie . I use a PC which have Windows OS . I want to monitor bandwidth , bytes, packets, packet dropped etc at several linux routers . I want to ask you some questions : Can I use round robin database and mrtg tool to generate html files at linux routers and call them from windows PC ? If it is impossible , can I use snmp to retrieve data from linux router at windows PC (snmp

Hi I''ve patched net-mrtg http://www.net-snmp.org/ with http://x-ray.prokon.cz/data/snmp/ sucefully Also I''ve copied QOS.TXT to /usr/local/share/snmp/mibs when I make a normal use of snmp, with mrtg in order to monitor all traffic on eth0 and eth1, it works OK. But, how must I do in order to get monitor for a specific class ? If I make a snmpwalk (like README suggest), I get

Hello Everybody, I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hosts....But I dont want SNMP to run on all the hosts[as required by MRTG] I used iptraf on my linux box, but it only measures the bandwidth on interface basis only.... I tried installing traffic-vis, its not working

Hi to all. I would to ask if there''s way in shorewall that I can be able to check my bandwidth, if im really getting what I paid for. Second, Is there a fast and effective way to implement traffic shaping with shorewall. Many thanks Jan --------------------------------- Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now

I am using a server with asterisk and I am trying to prioritize voip traffick -- I am a newbie at this traffic shaping, so please bear with me. I used the script below and what happens is thatall traffic in the bulk class stops after a couple of minutes. Also, should I include the ports for rtp in the filter statements with the ports 5061 and 4569? Note I have a fairly big pipe -- supposed to

hi, I have strange problems with HTB and several hundred classes flat structure i.e. root |--50kbps |--30kbps |--50kbps |--80kbps |--100kbps .... several hundred classes like this Ceil is the same as rate. The machine get no more than 2-3% average cpu(2.4Ghz pentium). What happens is that from time to time the traffic got "stalled". I tried numerous things to solve

Hi, can any body suggest any tool which can show the utilisation for individual classes for HTB. preferable written in C/or shell script. Regards Jayesh ------------------------------------------------- Still single? Click here to find the perfect match. http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?141

Hi ! I´ve been using the wonderful wondershaper from chapter 15.8 of the LARTC Howto for some time. It´s really wonderful. Actually, I use the version from http://freshmeat.net/projects/wshaper/?topic_id=87 Now I tried to put some hosts to low priority, and it doesn´t work. The traffic is splitted equally between the noprio and the other hosts. Is this because I use ip masquerading, and all

Hi I''m trying to move the tracking of the shaping from MRTG to Cacti. My predecessor, who built all this stuff and was far more advanced than I, had a shell script that collected data by running tc -s qdisc show dev on both eth 0 and 1 and then pushing it out via snmp to another server running MRTG. I''m building a new server with cacti and having trouble with the custom

Hi, I have a router which is maintained by our ISP. They have given us to monitor it by using MRTG. It is okay. But it only shows incoming and outgoing traffice. It does not say wherther is TCP or UDP or ICMP. It just shows in and out.That's it. But, I want to monitor this router ? Can you tell me a good pkg for it ? router has a snmp commiunity password . Ido not know it. My ISP does not

Hi all. I am having an issue and quite frankly would rather not spend the entire next two days learning the entire snmp program. I am hoping someone out there has used MRTG and SNMP to make it work. I have both installed. Single server, polling itself. Question 1- does snmpd have to run as a daemon, or only run once so I can get OID and MIBs from it? Question 2- does anyone know the command

Hi all, I need to provide shell hosting for about 40 users, and few days ago I found the wondershaper script, so Im trying to know if this script could help me to improve interactive ssh/telnet connections. Wondershaper could help me or its only efective on OUTGOINGS requests? Ok, any comment and feedback will be welcome. Sorry for my bad english and THANKS in advance.

Hi all, please, tell me about security of Darkstat. Is it good idea to install it on firewall/gateway ? I'd like to measure our company traffic, but I do not have Apache running on the gateway. How could I redirect Darkstat's output to web-server inside company ? Or is there some other tool, which can measure in/out traffic and send output to another machine ? I know MRTG, but it uses

I check system load like so: [root at server cron.daily]# w 10:07:33 up 4 days, 15:01, 2 users, load average: 4.22, 3.17, 3.09 I would like to to graph the 3.17 5 minute average with MRTG. Anyone know of some examples of doing this?

As a necessety for my job is to real-time monitor the bytes, packets, packet dropped etc of all the qdiscs working inside the kernel i''ve tried varius methods: 1. Parse tc -s command output and update a round robin database and use rrdtool to graphically display tc statistics. [varius perl scripts exist for the above job] 2. Unsuccesfully tried QoS SNMP extensions, in order to use a

Hi, Steff. Next file are not found on your website: http://www.docum.org/stef.coene/qos/tc-snmp//example/html/mrtg.cfg can you post it ? Thank you ! Andres _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/