similar to: wrr vs. htb

Guys Considering the festive season is upon us, thanks to everyone contributing to the list and helping all the readers with your great input! I don''t want to mention names, I''ll most certainly leave someone out. With this mail I''d like to test some theory on bandwidth management, with my own successes and failures during the past year. Sharing a link between 200

Guys Reading through my lartc mail, and thinking on how to tackle my next shaping solution, gave me an idea. I''d like to propose this idea for scrutiny and if it sounds viable I''ll definitely need to start developing in due time. For me in my day to day work with developing network application specifically geared for middle-tier ISP''s, and reading on other peoples

Guys All the recent discussions recently, and the knowledge of a 2.6 port, of WRR has made me very keen on trying it. I had a look at the docs and examples know but my mind is not in a very receptive state. Take this simple example. Incoming internet connection of 1mbps. Shared between up to 25 users simultaneously. I know that WRR can fairly distribute the traffic amongst the currently

Hi all, Here''s the situation. I have 80 users sharing a internet link of 5Mb link. The users are grouped in /29 ip addr classes so I have 10 classes of users I want to create a root htb, then 10 htb childs each with 0.5Mb bandwidth. The traffic will be directed to each class using tc filters. Now, I want that each of 8 users from each class to share equally the class bandwidth. Can I

Since shapecfg is no longer part of the distro what are people using in place of cbq to limit/throttle bandwidth? I have an ftp mirror that, if left unchecked, will suck up the entire bandwidth of the CoLo site. TIA, Joe -- My Useless Vanity Page - http://www.webtrek.com/joe See my blog, sumo game ranks and other useless junk

Guys I'm desperately looking for a postfix 2.2.x SRPM. I currently use 2.1.5.. I've found these, http://ftp.wl0.org/yum/postfix/2.2/rhel4/SRPMS.postfix/ Has anyone tried them, or can anyone recommend a proper SRPM for me for Centos 4.1? Kind regards -- Kenneth Kalmer kenneth.kalmer at gmail.com Folding at home stats

Guys Given the replies and interests lately on the WRR scheduler, and the shameless promotion of Route Hat (only kidding), my question is simple. Is there an alternative for the 2.6.x kernels? >From what I gather WRR is only available for the 2.4 kernels... Regards -- Kenneth Kalmer kenneth.kalmer@gmail.com http://opensourcery.blogspot.com

Hi folks. This message may be a bit verbose and not as techie as the ones I''ve seen in this list, but describing the scenario will save a lot of messages. Scenario: A building with 17 floors, each floor with 24 offices (totals 408 offices) connected to the backbone through a border switch (1 vlan for each office). The offices can lease bandwidth of 64k, 128k, 256k, 512k, 1M and 2Mbps,

Hi all, I need to provide shell hosting for about 40 users, and few days ago I found the wondershaper script, so Im trying to know if this script could help me to improve interactive ssh/telnet connections. Wondershaper could help me or its only efective on OUTGOINGS requests? Ok, any comment and feedback will be welcome. Sorry for my bad english and THANKS in advance.

Hi, more than a month ago I proposed an addition to the HOWTO to address a certain packet classification problem/bug and how to fix it (see http://mailman.ds9a.nl/pipermail/lartc/2005q3/016728.html). I never received any reaction from the HOWTO maintainers, not even when addressing them directly (see mail below). Given that a month has gone by: Is the HOWTO currently unmaintained? Regards,

Guys After reading through the archives I found some insightful ways to be able to shape traffic to pppoe clients from the server. I have two questions on the topic of setting up a pppoe server however... 1. The clients will all be connected to each other using a normal ethernet network, the segments connected with managed switches. The capacity is roughly 500 nodes. Will these pppoe sessions

Guys Oppologies for the cross post. I''ve been scouring the docs coming with the wrr patches and for the life of me I can''t figure out why there are 8 parameters for each class. <snip> weight1, min1, decr1, incr1, weight2, min2, decr2, incr2 </snip> According to the docs these parameters are handled the same way, but looking at the example scripts there are

Howdy all Apologies to the folks subscribed to the globalize list for dual posting this message... I''ve got a project running globalize and rails 1.1.4, and I''ve only recently adopted a strong love for testing. Now my models are 100% tested (I must note that I do not make use of any translations in the database yet), and I''ve now started with functional tests before

Sir, Kindly excuse me. I am a newbie to LARTC.. I am a small ISP in rural India distributing 1 MB link to 200 people. I have been using rshaper by Alessandro Rubini for shaping. http://freshmeat.net/projects/rshaper/ My kernel is Linux version 2.4.22-1.2115.nptl( Fedora Core 1) Rshaper is very good in controlling incoming bandwidth (from LAN) I use Squid also on this Linux Box.. Right

Hi, How can I set equal bandwidth of 512kbit downlink and 256kbit uplink for every single IP address of 254 IP addresses I have in my LAN? Regards, ro0ot

Hello Everybody, I have configured a Linux box that does traffic shaping. Its working wonderfully fine, just as expected...Now i want to measure the bandwidth consumed by each of my hosts....But I dont want SNMP to run on all the hosts[as required by MRTG] I used iptraf on my linux box, but it only measures the bandwidth on interface basis only.... I tried installing traffic-vis, its not working

Hi If I have a HTB class with 128kbit, and I want to put "N" users in that class ( in order to share bandwidth fairly ) , which is better for me ? esfq (hash dst) or wrr ? I would attach esfq or wrr to HTB parent class. Also I''ve readed on Jim script that over WRR put a RED qdisc, but I don''t understand it. bests andres

Hi All, I''ve just installed WRR and am looking at tools to monitor, graph and display the system and throughput of each queue/class/filter. I''ve looked at: iptraf - only shows tcp/udp flows, not QOS queue throughputs show.pl - doesnt work with WRR (as far as I can tell) tc-graph.pl - doesnt work with WRR (as far as I can tell) polltc_ - doesnt work with WRR (as far as I can

Dear members, I am trying to share the bandwith for all users fairly. because some users heavily uses p2p programs and a few hosts consume most of bandwith. when we limit each flow it does not work as one client has many connection at same time. Firstly I tried to write a script that use the ipfm(which accounts traffic usage) logs as follow .extract ip addresses heavy bandwith users from

Hello, we are using HTB for dividing 15 Mb/s upload rate to 1022 classes (rate 14 kb/s, ceil 15 Mb/s), but sometimes ksoftirqd_CPU0 uses the most of the CPU-time (over 90% CPU load is casual in such situation). This situation occurs several times a week and takes minutes or one hour and during that time it has enormous packet loss. Reboot of the machine usually solves this problem. Because