similar to: Shaping per machine

Hello! I have a quite complicated setup. In my network on each interface there is bandwidth limitation for each user. Booth outgoing (on interface itself) and incoming (attached IMQ) traffic. There is main HTB class which limits bandwidth for whole interface and HTB subclasses for each user. Filtering is done with hashing filters. This setup was working correctly. But now in the network I

Hi, Has anyone used TC in a wireless environment, which is dynamic. I understand that the parameters for queuing are static and cannot be changed unless the queuing discipline is deleted and reloaded with different parameters. If anyone can share any experience, that would be helpful. Thanx. Azim. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

Actually i gave up, i tried and tried and tried so many times, upgrading software falling back to an old version but it didn''t work, that''s it. i can''t do work together tc with iptables and iproute2 when i mark a packet with iptables tc doesn''t recognize them so it falls at the default leaf of the tc''s tree what i like is to mark packets depending on

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi, I wanted to implement some QOS on my Linux Box with HTB, but after some time spend on the configuration and tests, I still don''t manage to have some correct results. Here are the details : -ROOT 2000 kbits -HIGHPRIO SUBCLASS 50 kbits prio 0 -SUBCLASS1 750 kbits prio 1 -SERVICE1 250 kbits prio 1

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

Hello, I''m using tc to limit the bandwidth of our wireless customers. I have a working script, but I''m not happy with it. I''m trying to write a more sophisticated script, but when I run it, it give me this error: RTNETLINK answers: File exists I have no idea what this error means or how to fix it. Here is a portion of the script (the whole script shapes several

dear All, I'm a new student and my job is too shapping bandwith for our campus faculty network. I want to implement htb with Redhat-9.0 distro. does this distro kernel support htb and tc good ? or i should apply some patch or upgrade kernel ? regards reza

Hello every one! I''m making a project to a discipline in the university and the project is make a Linux router that grants QoS to Multimedia connections (the prof. say we can use Open Source Soft. :) or reinvent the wheel). I have been googeling and googeling and i found the l7-filter in source forge and the spectacular simple language that is TCNG. Well the problem is how can i

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

Hi, I''m looking for a script in order to do traffic control on a ciber cafe LAN, with linux router. Ciber has about 40 hosts, and I haven''t much bandwidth (512kbit). Also, I''ve a squid cache and it works very good! I''ve found Jim QoS script, and FairNat. Which is more suitable for me ? Jim QoS ? FairNat ? other ? If I put FairNat, I would need ZPH patch

Folks, I''m so surprised what happened to my box just in the few weeks lately. Here is my setup: INTERNET <----------> [eth0] SHAPER-BOX [eth1] <----------> USER-FARM both eth0 & eth1 got public ips (202.x.x.x) Why traffic monitored at eth0 is bigger than eth1 ? eth1 shaped just exactly the same as rate i defined in HTB. I just have 1024Kbps from my ISP and i defined the

Hello all, I am running a coop satellite link for my aviation company here in Iraq. (silly blog www.stardotstar.org). I am running tc with htb with good success so far. I am working on improving it though and need some help. Currently I have just 4 classes, syn/ack/ping, webchat, http, and then other. We are really happy with how this has improved our ability to call home from our rooms and

Hello, I have begun to use the tc scripts since 2 weeks ago, so I am beginner. I am trying to divide my bandwidth in 4 independent ones. Each of these sub-bandwidths is assigned to 4 different groups of ip. Bandwidth sharing is allowed. I put a Linux with two Ethernet card between the router and the LAN. Eth1 is the card connected to the router and eth0 is the one connected to the LAN. My ISP

Hi! I''m trying to limit the uplink bandwidth using htb but no packets are overlimit or dropped. :-( My router config: * Linux kernel 2.4.20-pre10 (htb v3.7) with everything built as modules in QoS, iptables in use. * tc binary from htb3.6-020525.tgz * external interface eth0: Internet access, 512 kbit/s uplink speed * internal interface eth1: internal LAN, 100 Mbit/s The hosts in the

Hello, I run one of my PCs as my personal router, with iptables+tc to control traffic and be my firewall. In TC, I use a combination of htb, qdisc and sfq (as well as prio) to classify bandwidth. In my current setup, I have 10 classifications of my bandwidth. (Even I admit this is probably more than I need, but at this point I''m still learning, so I''ll just leave them be.)

Hello, Besides a very good functionality, I have a small, yet stressing, problem. Let''s say I have a bandwidth of N bits. I have X clients, everyone with his fixed bandwidth. I create htb qdsics for each client. Each leaf has sfq queueing discipline. A sample config would be like this : tc class add dev eth0 parent 1:2 classid 1:346 htb rate 32Kbit ceil 32Kbit burst 4k

//Just to not forget eth0 is WAN and eth1 is LAN . The box is NATing my lan. I configured tcng to shape both download and upload and i got connection loss again. Maybe it is my script fault or it is something bad with packets marking . this is how i mark outgoing packets iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.1.23 -j MARK --set-mark $ip and this part of my script which is intented