similar to: Kernel panic with load balancing

Hi! I''m doing load balancing for 5 dsl lines, each one with a dsl router attached to a linux machine ethernet plug. The problem is that I''m adding 15 more dsl lines, and I don''t have enough PCI slots in the linux machine to sum up 20 ethernet plugs (I already have 2 quad ethernet cards). So I''m considering connecting all dsl routers and the linux machine to a

Has anyone had successfully installed more then two digium wildcards in the same machine? I'm going for four. thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

I ran some iperf tests today and it looks like the etherbridge is the limiting factor on throughput. In the beforetime, I saw great throughput to the VMs; over 800 Mbps. With the bridge, the numbers are in the 400s somewhere. Is this the speed I can expect from the bridge? Is there some tuning I should try, or another way to get more bandwidth into the VMs? This is with xen-2.0, 2.4.27-xen0

Recent SUP. Installed on Dell PowerEdge 4600. Getting tons of: Sep 30 12:23:16 zige /kernel: bge0: gigabit link up Sep 30 12:23:46 zige last message repeated 98 times Also getting some TCP retransmits. This causes noticable delays in pretty much everything I do now. Not a problem prior to the SUP. I was on 4.8-STABLE before. When pulling/replacing cables, it went into a mode where it would

Hi. I gave up with the IBM NetFinity, so I'm going to buy new hardware. I'm going to install: 1-)One X100P (1 FXO module) 2-)One TDM03B (3 FXO modules) I'll have the 4 FXO channels busy almost all the time, and I would like quality to be as good as possible without going to the high-level hardware. I would like to learn of some tested configurations (I've heard of problems

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

Hi, I received a bug report against BerkeleyDB 4 that may not be BerkeleyDB related, but a problem with FreeBSD or specific hardware in general. Jie Song (CC'd) reported that writing files with BerkeleyDB (no threading or something) on his ServerWorks machine causes data corruption (detected by BerkeleyDB 4.0 library functions) when the file sizes grow beyond 350 MB. For details, see PR

Hi! I am trying to export a PCI device (an AVM Fritzcard PCI ISDN card...) to a domU but when starting my domU I am getting this error: "pciback pci-4-0: 22 Couldn''t locate PCI device (0000:00:06.0)! perhaps already in-use?" My system is running both debian etch in dom0 and domU... Below you can find (hopefully) all important information... Sincerely, Gaubatz Patrick

Hello lists, I,ve compaq ML350 with 2 Xeon 2.4 GHZ and FreeBSD 5.0 RELEASE installed and working very fine about 4 mounts. The machine running GENERIC kernel samba and firebird database server with no problems until at begining of this week, in morning machine freezes with no responce iven in conconsole, no responce from network (pinging) no responce on console (key pressing) the only way to get

Hi, Thanks to everyone involved in the Xen project. I think it is great and can''t wait to get my hands dirty with it. In the meantime, I cannot boot Dom0 on an ibm x335 and I am not sure what the problem is. Any insights are welcome. Here is what my grub.conf file looks like: title Fedora Core (2.6.8-1.521) root (hd0,0) kernel /vmlinuz-2.6.8-1.521 ro root=/dev/sda9

Hi, I'm having trouble booting my system using the SuSE 9.0 installer CD at ftp://ftp.suse.com/pub/suse/i386/9.0/boot/boot.iso (ISOLINUX 2.06). My system is a Kontron cPCI-DT64 single board computer. The CD-ROM drive is an Adtron IC6C, has its own IDE controller and sits in another cPCI slot. System Details: System BIOS - PhoenixBIOS 4 Release 6.0, cPCI-DT64 BIOS 2.5 Adapter BIOS - Sil

Hello, I just gain experiences in using XEN and hope you can help me. My hostsystem is Centos5 that I installed on a Software-Raid (Level 1). Afterwards I downloaded the debian-tarball from the jailtime.org website, extracted/mounted the image and copied the "*/lib/modules/*<kernelversion>"-folder from my host to the guest. My XEN-Configfile looks like this: kernel =

Anyone using boards with this chipset? I've gotten some dual core single cpu boxes along with the physical dual cpu boxes I just received and they're using the Serverworks HT1000 (Broadcom 5785) chipset. My CentOS 4.2 DVD doesn't want to recognize the chipset so I can't see any of the SATA drives in the integrated SATA ports. Drives on 3Ware cards work as expected, but I

Hi folks, an Asterisk (www.asterisk.org) box will be built with the following specs and I wanted to know if CENTOS has a built process/config/parameter/special distro to target the AMD Opteron Dual Core plataform: 2 amd opteron 265 dual core 1.8 Ghz 2mb l2 cache 2x1024 ocz c2-6400 dual channel gold GX XTC 2 Seagate 16mb cache 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

Hi everyone, My email server is running CentOS 3 and I can't upgrade it to CentOS 4 using the CD's. At first I thought it was the old Megaraid card (that's no longer supported), so I replaced that with a new card. I've tried ISO's from CentOS 4, 4.1 and now 4.2 which I've tested and booted in other machines. Just not this one. I've never had a problem like this

Hello, all I apologize for all these questions. But I have so many running through my head for this. What brand of server is a good one to use for running an asterisk box? I did an install the other day on a Compaq Proliant ML370 G2 / Debian Sarge and it is currently working great. But HP/Compaq costs bukooo bucks. I have heard Super Micro is what alot of you are using. Any problem running

I'm having some trouble here - need some help! I've just bought a TE405p (32-bit 5V), but cannot get it working in a dell 6450. The dell has (from tech specs) "three peer PCI buses: two 64-bit buses and one 32-bit bus Expansion slots seven hot-pluggable PCI slots (two 64-bit/66 MHz, four 64-bit/33 MHz, and one 32-bit/33 MHz)" I cannot get the card working in any of the slots.

Hello all..... I would like to know if anyone here has had good experience with this Supermicro motherboard.....http://supermicro.com/products/motherboard/P4/E7221/P8SCT.cfm I am thinking about using it in an entry level mail and file server with a 3ware card and 200 GB SATA drives. Cost is a factor here otherwise I would go for an Opteron board instead. JC