similar to: What happened to the lartc mailing list?

Hello all, I''ve been trying to test HTB performance for different link bandwidths to find potential limits and this is what I have so far: http://home.comcast.net/~msethuraman/htbtest/ Can members please go over the setup, test procedure and the results and answer a few questions? 1. Is the testing methodology okay and can the results be considered accurate? If so, is this a decent

Dear All Why NAT rules stays valid even if I flush nat anf table chains?? I have: iptables -P FORWARD DROP iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -s SOME_IP -d SOME_BCP_5_IP --dport 1234 -j ACCEPT iptables -i nat -A PREROUTING -s SOME_IP -d MY_INTERNET_IP \\ --dport 1234 -j DNAT --to-destination SOME_BCP_5_IP The conection is

I am trying to get windind to work so my domain users can touch shares on this Linux box without being prompted for credentials. I put these in nsswitch.conf: passwd: files winbind group: files winbind Then I did this: cp /usr/src/samba-3.0.13/source/nsswitch/libnss_winbind.so /lib ln --symbolic /lib/libnss_windbind.so /lib/libnss_winbind.so.2 Make libnss_windbind

Hello Routing Gurus ;-) I''d like to know if it''s possible to make a routing decision for pakets originating from a specific port of the local machine without using ipfilter/iptables to mark the pakets. I read about the tc filter stuff but that seems only to be able to sort the pakets to a different queue on the same interface and not choose a different interface for example. Is

Here is a puzzle. I have a network with several servers. It''s a mess. It''s a /24 and pieces and servers are all over the place inside this /24 block, on both sides of the firewall. For example, the router at 1.2.3.1 is outside the firewall and many of the servers at 1.2.3.nnn/24 are behind the firewall. (Obviously, 1.2.3.nnn is a fudged network.) eth0 points outward to

Hi All - I looked for mention of this in the archives but wasn''t able to find anything. This isn''t even an advanced routing question, it should be a dirt-simple, basic, no-brainer, routine routing job. But I''m not getting it! I have a Linux iptables based firewall system that is making me crazy. The gist of the problem is, even when I turn off all firewall rules

Hi all, based on the information in the "Linux Advanced Routing & Traffic Control HOWTO", I was trying to set up traffic shaping on my firewall. While I found the HOWTO very useful, in the process I ran into some problems that I did not forsee: According to the HOWTO it seems that it should have worked, even after spending some time going through the sections looking for answers,

Hey, I am getting an invalid argument trying to insert a qdisc: [root@emu-5 iproute2]# tc qdisc add dev eth0 root xcp capacity 50Mbit limit 500 RTNETLINK answers: Invalid argument I''m not sure whats wrong here, because i can successfully insert this qdisc on other computers of mine. How can i debug this? Thanks! George

Hello everyone, I have a problem regarding gre tunneling, I have two linux box both of them has a private network and the linux A is connected to the internet via wireless radio and the other linux B is connected to the internet via lease line. Here is the setup of my two linux box Linux A eth0 = 203.189.x.1 (internet) eth1 = 192.168.1.1 (going to hub private network) Linux B eth0 = 205.198.x.1

My name is Jody and I am in Cape Town South Africa. I have been working on Windoze for about 6 months and have experienced many problems. I have been introduced to Linux (Suse 9.2) when I visited the Science center in the Vacation Period. I have installed Suse on my Dads Laptop and the Laptop is inturn connected to a network by means of a 100meg Switch. On the Network we have a PDC

Hello CFS, I was wondering if the new SLES10 kernel will be part of the 1.6.4 release. It appears to be tracked by: https://bugzilla.lustre.org/show_bug.cgi?id=13874 As this contains a major security fix (privilege escalation), it is a mandatory upgrade in many places and it would be nice to not have to roll our own kernel. Thanks, Kit

I know that tcng is old but I have a question about it. Was there ever a way to inject real traffic into the simulation, something like the output of tcpreplay? Thanks, Larry

I''ve applied julian''s paches to a 2.6.14 gentoo kernel with the appropiate options enabled, and i''m using a modified version of the mpath2.sh script also available on julian''s site http://www.ssi.bg/~ja/ Overall everything works nearly perfectly. Incomming connections to either the fios (PPPoE) connection, or cable modem get routed back out correctly. The

Dear R help users: I have set up a r help mailing list archive based on mysql which support full text search and auto-update. Please visit http://www.baidao.net/r/maillist/index.cgi . I hope you could provide me bug reports and suggestions. I will add r_dev and r_announce mailing list as soon as possible. Thanks in advance! eLan

Am 27.02.2015 um 03:13 schrieb Duncan Murdoch: > On 26/02/2015 6:34 PM, maillist at tlink.de wrote: >>> On 26/02/2015 3:09 PM, maillist at tlink.de wrote: >>>> When I send some outlandish characters through enc2native (or format) in >>>> R 3.1.2 on Ubuntu trusty it works quite well: >>>> >>>> > "?????" >>>> [1]

Nobody knows something new about tcng? I really think that this kind of language help people, i order to do easier configurations i want to know how can i do in tcng a nested classes configuration with HTB? -- Juan Felipe Botero Ingeniería de sistemas Universidad de Antioquia _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

Hi; Where do I add my on-bootup scripts? TIA, Victor -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20091113/0129a124/attachment-0003.html>

Hello I have some rules inserted in the NAT table dual SNAT and DNAT for a connection They use at some moment the same port of the outside network. The problem i have is that the connection tracking in the kernel checks first the oldest rule and then the newest one. I use a system based on ARM XScale processor. Is that the default behaviour and how can i change this behaviour? Marius

Hello I am using htb (krenel 2.6.14.3 + esfq patch from fatooh.org) to limit the bandwidth. But I want the absolute maximum rate to be for example 5Mbit and not to exceed it. here is the script: $tc qdisc add dev ${NETIF} root handle 1 htb r2q 4 $tc class add dev ${NETIF} parent 1: classid 1:21 htb rate 5Mbit ceil 5Mbit $tc class add dev ${NETIF} parent 1:21 classid 1:101 htb rate 2Mbit ceil

Could whomever is in charge of the lartc mailing list please change it to add the header: Reply-To: lartc@mailman.ds9a.nl Every other list I''m on is setup so that by default replies will go to the list. When replying to lartc emails I notice myself and others constantly forgetting this list does not behave like the rest, and that we have to either do a reply-to-all, or manually enter in